• Fill optional equipment forward across stages • Add a report for weight and balance approvers • Resolve a crash when deleting a fix • Add loading indicator on the terminal pane airport list • Show lateral arms on the weight and balance setup page • Resolve an issue where the plan could display a departure time in local time and not UTC New in 10.1.1 • Fixed an issue where flight plans could disappear during synchronisation or after moving between folders. • Improved saving, editing and reuse of named negative-weight entries in weight and balance. • Fixed missing negative-weight entries on printed load sheets. • Fixed sharing and saving load sheets as PDF files. • Corrected fuel units in the trip editor to match the selected aircraft. • Fixed altitude edits being lost when submitting or updating HAAST and Flight Advisor flight intentions. • Improved LSALT boundary menus and save prompts for aircraft changes and weather-service login details. • Prevented empty signatures from being saved. • Improved access to data downloads covered by eligible subscriptions. • Add POB field to the advanced weight and balance page • Update POB when adding passengers • Resolve an issue with advanced tanks using the wrong arm • Resolve a possible crash when the flight plan index updates • Resolve an issue where a stage could be reported out of the envelope, when it actually is not. • Resolve an issue with calculating an arm for fuel level in an advanced tank New in 10.1 • Add MOS Part 135/6 compliant journey log for enterprise customers • Improved GAF display under Weather • Add HAAST for RNZAF • Resolve an issue with the notepad and iOS 27 • Provide multiple auto-routing options prioritising high or low altitude IFR routes • Improvements to the Advanced WnB section • Resolve an issue with distance rings disappearing • Add support for both types of helicopter lateral WnB envelopes • Always print an SPFIB briefing two pages per page • Printing a SPFIB briefing will download a new briefing if one has not already been accessed

• Fixed an issue where flight plans could disappear during synchronisation or after moving between folders. • Improved saving, editing and reuse of named negative-weight entries in weight and balance. • Fixed missing negative-weight entries on printed load sheets. • Fixed sharing and saving load sheets as PDF files. • Corrected fuel units in the trip editor to match the selected aircraft. • Fixed altitude edits being lost when submitting or updating HAAST and Flight Advisor flight intentions. • Improved LSALT boundary menus and save prompts for aircraft changes and weather-service login details. • Prevented empty signatures from being saved. • Improved access to data downloads covered by eligible subscriptions. • Add POB field to the advanced weight and balance page • Update POB when adding passengers • Resolve an issue with advanced tanks using the wrong arm • Resolve a possible crash when the flight plan index updates • Resolve an issue where a stage could be reported out of the envelope, when it actually is not. • Resolve an issue with calculating an arm for fuel level in an advanced tank New in 10.1 • Add MOS Part 135/6 compliant journey log for enterprise customers • Improved GAF display under Weather • Add HAAST for RNZAF • Resolve an issue with the notepad and iOS 27 • Provide multiple auto-routing options prioritising high or low altitude IFR routes • Improvements to the Advanced WnB section • Resolve an issue with distance rings disappearing • Add support for both types of helicopter lateral WnB envelopes • Always print an SPFIB briefing two pages per page • Printing a SPFIB briefing will download a new briefing if one has not already been accessed

• Add MOS Part 135/6 compliant journey log for enterprise customers • Improved GAF display under Weather • Add HAAST for RNZAF • Resolve an issue with the notepad and iOS 27 • Provide multiple auto-routing options prioritising high or low altitude IFR routes • Improvements to the Advanced WnB section • Resolve an issue with distance rings disappearing • Add support for both types of helicopter lateral WnB envelopes • Always print an SPFIB briefing two pages per page • Printing a SPFIB briefing will download a new briefing if one has not already been accessed

Added in 10.0.2 • Add Grid LSALT map overlay. Enable under Map Settings • Add ability to view GAF forecast report on the GAF Weather view • Add ability to download SPFIB briefing under Print/Send • Make burning contingency fuel and holding fuel between stages configurable • Add optional label on the mid-point of a leg. Add labels to all route marker types (10nm, 10 min, 6 min etc) • Resolve an issue where GAFs may not update • Resolve an issue creating and editing user waypoints Added in 10.0.1 • Add location to GAF and Satellite views • Burning contingency fuel across stages is now an optional setting for user or enterprise groups • Resolve an issue with the WnB pages and loading profiles • Correctly shade load stations when weights are exceeded • Resolve some stability issues Added in 10.0 • ActivePlates - highlights your location on the vertical profile of RNP approach plates. Highlights the MSA sector and indicates inbound heading to holding patterns. ActivePlates also includes a HUD on the terminal pane which displays the current ground speed, vertical speed required to maintain the published glideslope, the target altitude required to be on the glideslope for your location. The surface winds from the current METAR is also displayed. • Added indication of circuit directions on airport diagrams. These will show correct directions for both day and night operations. • New Weight and Balance display, including a plan view of the aircraft and improved loading of passengers on multi-stage plans. Added an auto-load function for larger aircraft. Added ability to quickly load just the required fuel (for the stage or to the next refuel point). • New synthetic vision display, including airport locations, ADSB traffic, active airspace. Added ability to swipe to move viewport. • New Print/Send functionality. Save preferred documents to print/send preflight and post flight. • Add Tech Log feature for Enterprise customers. Documents can be attached both pre-flight and post-flight and are saved in the AvPlan Cloud. • New optimise altitude function, displaying LSALT and freezing levels. There is now a separate function to optimise the altitude for alternate stages as well. • New GAF display under Weather • New SPFIB briefing functions, including annotations and searching • Added ability to annotate flight plan reports under Planning. Annotated documents can be printed/emailed and archived in the AvPlan Cloud under Print/Send • Approach plate annotations are now also displayed on the map, when overlaying a plate on the map • TAF/METAR/ATIS can be displayed using a button on all plates under Terminal. Additionally, a plate can be added to favourites using a button on all plates.

Added in 10.0.1 • Add location to GAF and Satellite views • Burning contingency fuel across stages is now an optional setting for user or enterprise groups • Resolve an issue with the WnB pages and loading profiles • Correctly shade load stations when weights are exceeded • Resolve some stability issues Added in 10.0 • ActivePlates - highlights your location on the vertical profile of RNP approach plates. Highlights the MSA sector and indicates inbound heading to holding patterns. ActivePlates also includes a HUD on the terminal pane which displays the current ground speed, vertical speed required to maintain the published glideslope, the target altitude required to be on the glideslope for your location. The surface winds from the current METAR is also displayed. • Added indication of circuit directions on airport diagrams. These will show correct directions for both day and night operations. • New Weight and Balance display, including a plan view of the aircraft and improved loading of passengers on multi-stage plans. Added an auto-load function for larger aircraft. Added ability to quickly load just the required fuel (for the stage or to the next refuel point). • New synthetic vision display, including airport locations, ADSB traffic, active airspace. Added ability to swipe to move viewport. • New Print/Send functionality. Save preferred documents to print/send preflight and post flight. • Add Tech Log feature for Enterprise customers. Documents can be attached both pre-flight and post-flight and are saved in the AvPlan Cloud. • New optimise altitude function, displaying LSALT and freezing levels. There is now a separate function to optimise the altitude for alternate stages as well. • New GAF display under Weather • New SPFIB briefing functions, including annotations and searching • Added ability to annotate flight plan reports under Planning. Annotated documents can be printed/emailed and archived in the AvPlan Cloud under Print/Send • Approach plate annotations are now also displayed on the map, when overlaying a plate on the map • TAF/METAR/ATIS can be displayed using a button on all plates under Terminal. Additionally, a plate can be added to favourites using a button on all plates.

• ActivePlates - highlights your location on the vertical profile of RNP approach plates. Highlights the MSA sector and indicates inbound heading to holding patterns. ActivePlates also includes a HUD on the terminal pane which displays the current ground speed, vertical speed required to maintain the published glideslope, the target altitude required to be on the glideslope for your location. The surface winds from the current METAR is also displayed. • Added indication of circuit directions on airport diagrams. These will show correct directions for both day and night operations. • New Weight and Balance display, including a plan view of the aircraft and improved loading of passengers on multi-stage plans. Added an auto-load function for larger aircraft. Added ability to quickly load just the required fuel (for the stage or to the next refuel point). • New synthetic vision display, including airport locations, ADSB traffic, active airspace. Added ability to swipe to move viewport. • New Print/Send functionality. Save preferred documents to print/send preflight and post flight. • Add Tech Log feature for Enterprise customers. Documents can be attached both pre-flight and post-flight and are saved in the AvPlan Cloud. • New optimise altitude function, displaying LSALT and freezing levels. There is now a separate function to optimise the altitude for alternate stages as well. • New GAF display under Weather • New SPFIB briefing functions, including annotations and searching • Added ability to annotate flight plan reports under Planning. Annotated documents can be printed/emailed and archived in the AvPlan Cloud under Print/Send • Approach plate annotations are now also displayed on the map, when overlaying a plate on the map • TAF/METAR/ATIS can be displayed using a button on all plates under Terminal. Additionally, a plate can be added to favourites using a button on all plates.

• Add ability to create/edit user waypoints using NZTM coordinates (for NZ) • Add aircraft instance version to load sheet • Resolve an issue sending a flight plan with long remarks to IFIS • Change some naming of planning options in NZ to better align with NZ terminology • If there is advanced tank data, do not display the arm in the summary • Use underlying class E frequency in current/next FIA frequency box if flying over and not through this airspace • Auto-hide airspace highlighting after 15 seconds • Some stability improvements

New in 9.9.9 • Add a GMT Time complication to the Apple Watch • Fix issue where black borders could appear around individual charts • Fix issue where entering nothing on a fuel load station in pounds sets the fuel to -1 • Fix issue with the LSALT calculator in the Torres Strait • Fix issue with winds and auto-waypoints in plan • Fix issue with the altitude optimiser sometimes using the wrong winds New in 9.9.8 • Allow enable contingency fuel on alternate legs to be configurable by group in Enterprise Cloud • Add option under WnB Setup to enable contingency fuel on alternate legs • Always have 'full text notams' enabled for SPFIB briefings • Always set the callsign for a new plan to something, rather that not have it set when the default aircraft has been deleted • Resolve an issue downloading upper level winds • Resolve an issue syncing the active aircraft • Always set the default taxi fuel when changing aircraft • Resolve an issue filing a plan via NAIPS with a delay at the destination • Work around an issue with foreflight when exporting a flight plan • Fix issue where a flight could have empty duplicates in flight logs • Allow users to create a plan with two points that are the same. (for airwork around an airport etc) New in 9.9.7 • Resolve an issue syncing some aircraft attributes across devices • Improve route selection when flying via high level IFR routes • When in plan mode and departure is selected, activate the next departure point which has no logged departure time New in 9.9.6 • Do not add contingency fuel on alternate legs (will be added as an option in a future update) • Resolve an issue parsing METARs in NZ • Improve download speed of the Satellite map • Add magnetic track to the Navigation Log flight plan form • Resolve an issue linking the app with Dropbox • Resolve an issue where the climb TAS may not be populated on the top of climb waypoint • Resolve an issue uploading plans to Garmin Pilot when a user LSALT has been entered New in 9.9.5 • Fix layout on the windy page • Experimental automatic logging of engine start, engine stop • Add contingency fuel on approach fuel • Remove Test remark from plan import code • Improve downloading of high level winds • Resolve an issue where the invert/reverse buttons were not tappable under the flight plan • Resolve an issue which could cause a 'remote device modified the plan' message to appear New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons.

New in 9.9.8 • Allow enable contingency fuel on alternate legs to be configurable by group in Enterprise Cloud • Add option under WnB Setup to enable contingency fuel on alternate legs • Always have 'full text notams' enabled for SPFIB briefings • Always set the callsign for a new plan to something, rather that not have it set when the default aircraft has been deleted • Resolve an issue downloading upper level winds • Resolve an issue syncing the active aircraft • Always set the default taxi fuel when changing aircraft • Resolve an issue filing a plan via NAIPS with a delay at the destination • Work around an issue with foreflight when exporting a flight plan • Fix issue where a flight could have empty duplicates in flight logs • Allow users to create a plan with two points that are the same. (for airwork around an airport etc) New in 9.9.7 • Resolve an issue syncing some aircraft attributes across devices • Improve route selection when flying via high level IFR routes • When in plan mode and departure is selected, activate the next departure point which has no logged departure time New in 9.9.6 • Do not add contingency fuel on alternate legs (will be added as an option in a future update) • Resolve an issue parsing METARs in NZ • Improve download speed of the Satellite map • Add magnetic track to the Navigation Log flight plan form • Resolve an issue linking the app with Dropbox • Resolve an issue where the climb TAS may not be populated on the top of climb waypoint • Resolve an issue uploading plans to Garmin Pilot when a user LSALT has been entered New in 9.9.5 • Fix layout on the windy page • Experimental automatic logging of engine start, engine stop • Add contingency fuel on approach fuel • Remove Test remark from plan import code • Improve downloading of high level winds • Resolve an issue where the invert/reverse buttons were not tappable under the flight plan • Resolve an issue which could cause a 'remote device modified the plan' message to appear New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons. New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud

New in 9.9.7 • Resolve an issue syncing some aircraft attributes across devices • Improve route selection when flying via high level IFR routes • When in plan mode and departure is selected, activate the next departure point which has no logged departure time New in 9.9.6 • Do not add contingency fuel on alternate legs (will be added as an option in a future update) • Resolve an issue parsing METARs in NZ • Improve download speed of the Satellite map • Add magnetic track to the Navigation Log flight plan form • Resolve an issue linking the app with Dropbox • Resolve an issue where the climb TAS may not be populated on the top of climb waypoint • Resolve an issue uploading plans to Garmin Pilot when a user LSALT has been entered New in 9.9.5 • Fix layout on the windy page • Experimental automatic logging of engine start, engine stop • Add contingency fuel on approach fuel • Remove Test remark from plan import code • Improve downloading of high level winds • Resolve an issue where the invert/reverse buttons were not tappable under the flight plan • Resolve an issue which could cause a 'remote device modified the plan' message to appear New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons. New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane

New in 9.9.6 • Do not add contingency fuel on alternate legs (will be added as an option in a future update) • Resolve an issue parsing METARs in NZ • Improve download speed of the Satellite map • Add magnetic track to the Navigation Log flight plan form • Resolve an issue linking the app with Dropbox • Resolve an issue where the climb TAS may not be populated on the top of climb waypoint • Resolve an issue uploading plans to Garmin Pilot when a user LSALT has been entered New in 9.9.5 • Fix layout on the windy page • Experimental automatic logging of engine start, engine stop • Add contingency fuel on approach fuel • Remove Test remark from plan import code • Improve downloading of high level winds • Resolve an issue where the invert/reverse buttons were not tappable under the flight plan • Resolve an issue which could cause a 'remote device modified the plan' message to appear New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons. New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane

New in 9.9.5 • Fix layout on the windy page • Experimental automatic logging of engine start, engine stop • Add contingency fuel on approach fuel • Remove Test remark from plan import code • Improve downloading of high level winds • Resolve an issue where the invert/reverse buttons were not tappable under the flight plan • Resolve an issue which could cause a 'remote device modified the plan' message to appear New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons. New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane New in 9.9 • New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

New in 9.9.4 • Group documents are marked read on website when opened. • Variable reserve is applied to alternate legs • Display the correct airfield plate when resuming from the background • Resolve an issue with the LSALT calculator for users with standard sub • Fix an issue with IFR routes on the map page • Increase label size of the IFR routes • Display the planned ETD on the ICAO flight plan form • Automatically open the last used plan when the app starts • Fix the 'sync plan via cloud' option • Sync the open plan when app goes into the background • When copying a plan, dont copy actual data (ATA, fuel loads, track log) and place copied plan at the topMerge pull request #2534 from AvSoftAustralia/AvPlan_9.9.4 • Resolve an issue with index units on load sheets • Allow users to file plans via NAIPS in PNG, East Timor, Indonesia, New Caledonia, Solomons. New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane New in 9.9 • New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

New in 9.9.3 • BOD/EOD on the terminal pane will use the actual or planned ETA for the current plan • Direct-to legs crossing the antimeridian will be displayed correctly • Basic load sheet will display load stations when no passenger manifest is present • An issue where crew loads aren't displayed on the advanced load profile is resolved • Don't clear text when editing a user waypoint name • Fix layout issue with the cursor cross hairs and hiding the flight plan • Correctly log departure and arrival at user waypoints • Ensure the selected pilot profile callsign is sent with a flight plan • Report the read state of a group document into the Enterprise Cloud New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane New in 9.9 • New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

New in 9.9.2 • When copying a weight and balance profile, copy each aircraft settings for that profile (empty weight, arm, defaults) • Hide cost in optimise altitudes if the cost is $0 • Use flight plan departure times in optimise altitudes • Resolve an issue where altitudes could be duplicated in optimise altitudes • Resolve some issues where some tableview cells are grey and not the correct background colour • Resolve an issue where the GPS could continue to run for long times when the app is in the background • Improve the performance of the restricted airspace display • Resolve an issue where emojis in a KML could cause the app to exit • Resolve some performance issues with the airport information page New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane New in 9.9 • New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

New in 9.9.1 • Fix issue with default loads not being saved correctly • Fix issue where an image preview of a plate isn't being displayed while a high resolution PDF is being drawn • Improve dual page print layout when using Print/Send • Fix issue with the synthetic vision display • Fix layout issue on the Terminal pane New in 9.9 • New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

• New weather overlays (SIGWX, Echo Tops) and updated radar and lightning data. Retired visibility and cloud forecasts • Resolve an issue with the fuel tables in the printed reports • Fix an issue inserting waypoints using the map on iPhone • Resolve a crash when adding nested flight plan folders • Populate Y,Z in IFIS plans & send more details • Fix issue with VFR plans having IFR variable fuel reserve applied • Fix an issue when scrolling a TAF or METAR on the airport info popup • Get the app to dial the AWIS when viewing the number on the airport info popup • Fix some localisation issues in NZ

New in 9.8.8 • Improve flight plan sync performance when updating flight plan index • Add some better labelling to the flight plan index • Fix issue with VFR reserves and basic subscriptions • Relocate tower/CTAF frequencies on the nearest items display to stop overlaps. Make them bold to stand out • Always show the flight status/messages option under planning • Do not flip to the planning pane when there is an incoming TAF/METAR/AIRMET/SIGMET message New in 9.8.7 • Resolve an issue with advanced load profiles not being used • Resolve an issue loading map tiles across the anti-meridian • Send flight plan remarks to IFIS New in 9.8.6 • SPFIB briefings are tailored based on your departure and arrival times. • Old fuel prices will not be displayed on the map. Only prices updated in the past 6 months are visible • Improve text entry on the Leg Details page • Taxi fuel values will not be zeroed if you change aircraft callsigns and no default taxi fuel is present • Improve performance of the Altitude Optimiser and display more altitudes for aircraft that have a service ceiling over 32000ft. • Resolve an issue with the glide planner and obstacle overlay for US users • Resolve an issue where a delay on the landing point in your plan could be sent twice New in 9.8.5 • Add 'Approach Time' as an editable parameter in the fuel plan • Resolve an issue with iOS 18 and a possible crash when accessing plates on the terminal pane • Resolve an issue where the flight log under Settings, Flight Logs may not display New in 9.8.4 • Plans with a delay on the origin or destination can be filed correctly • Resolve an issue where plans with a delay may result in the app crashing New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.7 • Resolve an issue with advanced load profiles not being used • Resolve an issue loading map tiles across the anti-meridian • Send flight plan remarks to IFIS New in 9.8.6 • SPFIB briefings are tailored based on your departure and arrival times. • Old fuel prices will not be displayed on the map. Only prices updated in the past 6 months are visible • Improve text entry on the Leg Details page • Taxi fuel values will not be zeroed if you change aircraft callsigns and no default taxi fuel is present • Improve performance of the Altitude Optimiser and display more altitudes for aircraft that have a service ceiling over 32000ft. • Resolve an issue with the glide planner and obstacle overlay for US users • Resolve an issue where a delay on the landing point in your plan could be sent twice New in 9.8.5 • Add 'Approach Time' as an editable parameter in the fuel plan • Resolve an issue with iOS 18 and a possible crash when accessing plates on the terminal pane • Resolve an issue where the flight log under Settings, Flight Logs may not display New in 9.8.4 • Plans with a delay on the origin or destination can be filed correctly • Resolve an issue where plans with a delay may result in the app crashing New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.6 • SPFIB briefings are tailored based on your departure and arrival times. • Old fuel prices will not be displayed on the map. Only prices updated in the past 6 months are visible • Improve text entry on the Leg Details page • Taxi fuel values will not be zeroed if you change aircraft callsigns and no default taxi fuel is present • Improve performance of the Altitude Optimiser and display more altitudes for aircraft that have a service ceiling over 32000ft. • Resolve an issue with the glide planner and obstacle overlay for US users • Resolve an issue where a delay on the landing point in your plan could be sent twice New in 9.8.5 • Add 'Approach Time' as an editable parameter in the fuel plan • Resolve an issue with iOS 18 and a possible crash when accessing plates on the terminal pane • Resolve an issue where the flight log under Settings, Flight Logs may not display New in 9.8.4 • Plans with a delay on the origin or destination can be filed correctly • Resolve an issue where plans with a delay may result in the app crashing New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.5 • Add 'Approach Time' as an editable parameter in the fuel plan • Resolve an issue with iOS 18 and a possible crash when accessing plates on the terminal pane • Resolve an issue where the flight log under Settings, Flight Logs may not display New in 9.8.4 • Plans with a delay on the origin or destination can be filed correctly • Resolve an issue where plans with a delay may result in the app crashing New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.4 • Plans with a delay on the origin or destination can be filed correctly • Resolve an issue where plans with a delay may result in the app crashing New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.3 • Resolve an issue with the ICAO flight plan report & alternates • Resolve an issue printing load sheets on a plan with many stages New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.2 • Always allow the ATA to be edited for a waypoint • Users should not be able so sign a load sheet when aircraft is overloaded • Calculate EET when crossing an FIR boundary when submitting a plan • Fix an issue where the pilot profile callsign isn't always sent to NAIPS New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)

New in 9.8.1 • Display track log on map when no plan is active • Fix issue with direct-to hiding HUD on iPhone • The base map is now the sectional map, not the openstreetmap map • Fix issues with direct-to and distance rings on the other side of the anti-meridian • Better handling of aerodrome closed NOTAMs • Delete distance rings if the user waypoint, airport, navaid or waypoint is removed • Distance rings handle the anti-meridian correctly • Fix a performance issue in the altitude optimiser • Style KML overlays correctly (support the undocumented format of KML exported by google earth on the web) • Fix crash when de-selecting a KML overlay • Fix issue when reordering passengers on the pax manifest page • Update USA radar refresh interval to 10 minutes New in 9.8 • Add customisable distance rings around airports, navaids, waypoints etc. • Winds aloft in NZ now come from the area forecast winds at and below 10,000ft • Add the ICAO flight plan data entry form and printout to NZ users • Add support for sending ADSB information with plans in NZ • Greatly improve flight plan submission in NZ • Allow the operation type (G, S etc) to be specified per leg and not per-plan • Resolve an issue swiping between favourite plates • Add tail number to GPX export (for easy import to flysto.net)