******** Version: 1.18.2 ********* Main feature ▪ Added the option to exclude malfunctioning sensors from seed monitoring. ▪ Introduced a new “Sensor status” field for easier troubleshooting. ▪ Improved the sensor contamination indicator to provide an early warning of dust buildup. Previously, contamination was only reported when dust had already prevented the sensor from operating properly. The new warning state alerts users before cleaning becomes necessary. ▪ Redesigned the X-LiNE module and sensor diagnostics screens for easier troubleshooting. Improved Stability • Improved overall application stability and fixed bugs identified since the previous release. ******** Version: 1.17.12 ********* Main features   • Added the ability to check and manually modify the speed source • Sensor type is now stored as part of the seeding profile. When a profile is selected at startup, the corresponding sensor type is applied automatically • Added support for the FS40 sensor • Introduced the new PRO Functions license with simplified license handling • Input minimum and maximum values are now independent of the selected units. Limits are automatically converted and applied based on the active unit system • Added the option to skip BaseModule and Sensor HEX files during forced firmware updates • Unused amount of seed counting license is used as fertilizer performance license. • Hose full/blind sensor handling changed ⁃ Blockage alerts are shown, even if the seeder is not in working position • New ISOFLOW app (ISOBUS)  ⁃ Restructured and unified settings and setup (menus and screens) ⁃ Provides the same new features as SeedView • Support for iPadOS 14 and older versions has been discontinued Improved stability     • Improved overall application stability • Many screens and function bars are now fully responsive thanks to Auto Layout improvements  ******** Version: 1.15.0 ********* Main features   • Supports XeedGATE HW v3.x  • New ISOFLOW app (ISOBUS)  ⁃ Major changes/improvements  ⁃ Chinese Translation added  ⁃ Restructured settings menu and UI screens  ⁃ Minor changes/improvements  ⁃ Default product type  ⁃ Switching between Fertilizer and seed  ⁃ ISOBUS bus load optimization ⁃ Some German translation fixed  ⁃ Improved Alert List display    Improved stability     • More stable Bluetooth connection   • BLE Communication issues with system having 24 X-LiNE modules and more than 250 sensors  • Numerous other minor bug fixes, enhancing the app's stability and reliability.

******** Version: 1.17.12 ********* Main features   • Added the ability to check and manually modify the speed source • Sensor type is now stored as part of the seeding profile. When a profile is selected at startup, the corresponding sensor type is applied automatically • Added support for the FS40 sensor • Introduced the new PRO Functions license with simplified license handling • Input minimum and maximum values are now independent of the selected units. Limits are automatically converted and applied based on the active unit system • Added the option to skip BaseModule and Sensor HEX files during forced firmware updates • Unused amount of seed counting license is used as fertilizer performance license. • Hose full/blind sensor handling changed ⁃ Blockage alerts are shown, even if the seeder is not in working position • New ISOFLOW app (ISOBUS)  ⁃ Restructured and unified settings and setup (menus and screens) ⁃ Provides the same new features as SeedView • Support for iPadOS 14 and older versions has been discontinued Improved stability     • Improved overall application stability • Many screens and function bars are now fully responsive thanks to Auto Layout improvements  ******** Version: 1.15.0 ********* Main features   • Supports XeedGATE HW v3.x  • New ISOFLOW app (ISOBUS)  ⁃ Major changes/improvements  ⁃ Chinese Translation added  ⁃ Restructured settings menu and UI screens  ⁃ Minor changes/improvements  ⁃ Default product type  ⁃ Switching between Fertilizer and seed  ⁃ ISOBUS bus load optimization ⁃ Some German translation fixed  ⁃ Improved Alert List display    Improved stability     • More stable Bluetooth connection   • BLE Communication issues with system having 24 X-LiNE modules and more than 250 sensors  • Numerous other minor bug fixes, enhancing the app's stability and reliability.  ******** Version: 1.14.1 ********* Main features  • Improved Variable Rate Application support ⁃ Option to select X-LiNE Module based average calculation to be able to handle Variable Rate Application on an improved way • Saves view type (kg/ha; seeds/ha; seeds/m2 etc..) • X-LiNE module binding can be edited in settings • Hopper level quick input field added • “Every second row I closed” mode available also for fertilizer • Improved day-light mode color set • Improved troubleshooting and device replacing support    Improved stability   • Lots of issues are fixed    ******** Version: 1.12.0 ********* Main features   • Alert on No Flow feature ⁃ can be applied optionally. Provides alerts on rows, having no flow even after entering the working position. Previously, these situations did not trigger an alert for the automatic handling of tramlines and other row shut off mechanisms. • More informative error messages - in case of physical failures ISOFLOW application   • Alert on No Flow feature ⁃ the feature also implemented on ISOFLOW Improved stability   • New iPad screen resolution ratios are adopted • Lots of issues are fixed    ******** Version: 1.11.1 ********* Main features   • Enhanced Row Shut Off Mode (previously: Skipped rows) • Enhanced Firmware Upgrade process: ⁃ shows more detailed warnings and progress information. ⁃ recognises devices with failed firmware update, helps finishing the upgrade process more efficiently. (e.g.: In case of faulty devices no need to physically remove them) ISOFLOW application   • Enhanced Row Shut Off Mode (previously: Skipped rows) • Firmware Update feature: can upgrade devices with older firmware attached to the system, to make them compatible Improved stability   • Lots of issues are fixed

******** Version: 1.15.0 ********* Main features   • Supports XeedGATE HW v3.x  • New ISOFLOW app (ISOBUS)  ⁃ Major changes/improvements  ⁃ Chinese Translation added  ⁃ Restructured settings menu and UI screens  ⁃ Minor changes/improvements  ⁃ Default product type  ⁃ Switching between Fertilizer and seed  ⁃ ISOBUS bus load optimization ⁃ Some German translation fixed  ⁃ Improved Alert List display    Improved stability     • More stable Bluetooth connection   • BLE Communication issues with system having 24 X-LiNE modules and more than 250 sensors  • Numerous other minor bug fixes, enhancing the app's stability and reliability.  ******** Version: 1.14.1 ********* Main features  • Improved Variable Rate Application support ⁃ Option to select X-LiNE Module based average calculation to be able to handle Variable Rate Application on an improved way • Saves view type (kg/ha; seeds/ha; seeds/m2 etc..) • X-LiNE module binding can be edited in settings • Hopper level quick input field added • “Every second row I closed” mode available also for fertilizer • Improved day-light mode color set • Improved troubleshooting and device replacing support    Improved stability   • Lots of issues are fixed    ******** Version: 1.12.0 ********* Main features   • Alert on No Flow feature ⁃ can be applied optionally. Provides alerts on rows, having no flow even after entering the working position. Previously, these situations did not trigger an alert for the automatic handling of tramlines and other row shut off mechanisms. • More informative error messages - in case of physical failures ISOFLOW application   • Alert on No Flow feature ⁃ the feature also implemented on ISOFLOW Improved stability   • New iPad screen resolution ratios are adopted • Lots of issues are fixed    ******** Version: 1.11.1 ********* Main features   • Enhanced Row Shut Off Mode (previously: Skipped rows) • Enhanced Firmware Upgrade process: ⁃ shows more detailed warnings and progress information. ⁃ recognises devices with failed firmware update, helps finishing the upgrade process more efficiently. (e.g.: In case of faulty devices no need to physically remove them) ISOFLOW application   • Enhanced Row Shut Off Mode (previously: Skipped rows) • Firmware Update feature: can upgrade devices with older firmware attached to the system, to make them compatible Improved stability   • Lots of issues are fixed    ******** Version: 1.10.1 ********* Main features   • Very Low Application Rate feature: suspends leaking seeds filter when the intended application rate is very low (only 1-2 seeds/sec/row). This rate normally filtered out, assuming seed leaking.  • Skipped rows feature: by switching on the skipped rows option, you can simply let the application know, that every second seeding rows are closed on the machine • Speed and Working position from ISOBUS feature: speed and working position can be received from ISOBUS (if it is available) ISOFLOW application   • Russian language is added to ISOFLOW (ISOBUS appliaction)  • also added to ISOFLOW: ⁃ Very Low Application Rate feature ⁃ Skipped rows feature ⁃ Speed and Working position from ISOBUS feature Improved stability   • Lots of issues are fixed      ******** Version: 1.8.2 ********* Main features  ⁃ Make SeedView (iPad) and ISOFLOW (ISOBUS) applications being more uniformed  ⁃ Faster upgrade process  ISOFLOW application  ⁃ Interpreting ‘working position’ signal can be changed in the Settings menu in ISOFLOW. (avoiding accidental changing)  Improved stability  - Lots of issues are fixed

Main features • Improved Variable Rate Application support Option to select X-LiNE Module based average calculation to be able to handle Variable Rate Application on an improved way • Saves view type (kg/ha; seeds/ha; seeds/m2 etc..) • X-LiNE module binding can be edited in settings • Hopper level quick input field added • “Every second row I closed” mode available also for fertilizer • Improved day-light mode color set • Improved troubleshooting and device replacing support Improved stability  • Lots of issues are fixed

Main features   • Alert on No Flow feature ⁃ can be applied optionally. Provides alerts on rows, having no flow even after entering the working position. Previously, these situations did not trigger an alert for the automatic handling of tramlines and other row shut off mechanisms. • More informative error messages - in case of physical failures ISOFLOW application   • Alert on No Flow feature ⁃ the feature also implemented on ISOFLOW Improved stability   • New iPad screen resolution ratios are adopted • Lots of issues are fixed

• Enhanced Row Shut Off Mode (previously: Skipped rows) • Enhanced Firmware Upgrade process: ⁃ shows more detailed warnings and progress information. ⁃ recognises devices with failed firmware update, helps finishing the upgrade process more efficiently. (e.g.: In case of faulty devices no need to physically remove them) ISOFLOW application   • Enhanced Row Shut Off Mode (previously: Skipped rows) • Firmware Update feature: can upgrade devices with older firmware attached to the system, to make them compatible Improved stability   • Lots of issues are fixed

• Very Low Application Rate feature: suspends leaking seeds filter when the intended application rate is very low (only 1-2 seeds/sec/row). This rate normally filtered out, assuming seed leaking.  • Skipped rows feature: by switching on the skipped rows option, you can simply let the application kno, that every second seeding rows are closed on the machine • Speed and Working position from ISOBUS feature: speed and working position can be received from ISOBUS (if it is available)

Handles the new X-LiNE Modules (HW version 1.14)

Improved license handling

Main features  ⁃ Make SeedView (iPad) and ISOFLOW (ISOBUS) applications being more uniformed  ⁃ Faster upgrade process  ISOFLOW application  ⁃ Interpreting ‘working position’ signal can be changed in the Settings menu in ISOFLOW. (avoiding accidental changing)  Improved stability  - Lots of issues are fixed

******** Version: 1.7.4 ********* - Fixes SeedCount/Fertilizer Performance feature enabling issues ******** Version: 1.7.3 ********* Improved main features - using standard ISOBUS speed info when no speed info from BaseModule is available - “Empty hopper” alarm - if no working seed for a product in working position Improved stability - Some issues are fixed to make the system more stable. ISOFLOW application - Features listed above also added to ISOFLOW application - Option to enter geometric info for TC

Improved main features - using standard ISOBUS speed info when no speed from BaseModule is available - “Empty hopper” alarm - if no working seed row for a product in working position Improved stability - Some issues are fixed to make the system more stable. ISOFLOW application - Features listed above also added to ISOFLOW application - Option to enter geometric info for TC

Improved main features - consuming standard ISOBUS speed info when it - “Empty hopper” alarm - if no working seed for a product in working position Improved stability - Some issues are fixed to make the system more stable. ISOFLOW application - Features listed above also added to ISOFLOW application - Option to enter geometric info for TC

- Upgradable FlowSense sensors: FlowSense sensors can be upgraded with seed count capability by purchasing and installing a licence key. - The application is more stable and powerful now. - Contains the new ISOFLOW application for ISOBUS UT, which provides a comparable feature set to the iPad on ISOBUS UT.

- Upgradable FlowSense sensors: FlowSense sensors can be upgraded with seed count capability by purchasing and installing a licence key. - The application is more stable and powerful now. - Contains the new ISOFLOW application for ISOBUS UT, which provides a comparable feature set to the iPad on ISOBUS UT.

The application is more stable and powerful now. It also contains the new ISOFLOW application for ISOBUS UT, which provides a comparable feature set to the iPad on ISOBUS UT.

IMPROVED: - profile editing function - performance and stability - redesigned screens

- Seeding profile can be easily repaired after any device error - Improved stability and performance

- Alarm delay feature - Improved firmware upgrade method (via Bluetooth) - Ability to automatically migrate profiles between versions - Improved stability and performance

- The App can use GPS as speed source - Shows entire distributor performance on distributor screen view - Fertilizer barchart view - Bug fixes