SDR connectivity issue - Addressed issue where SDR would not reconnect automatically after connectivity loss. ARINC format waypoint layer - New chart layer displaying ARINC waypoints for improved situational awareness. ARINC format converter - Quickly convert between ARINC and lat/long formats to reduce the risk of GNE. Improved waypoint information and layout - Waypoints now show ARINC and lat/long equivalents, plus distance from the aircraft. Chart search improvements - Faster chart search to quickly locate waypoint information. Journey Logbook improvements - Table of contents – Easier navigation within the journey logbook. - Closeout reminder – Post-flight reminder to create your journey logbook. - Pilot-confirmed signature and trip purpose (ICAO Annex 6) – Sign your logbook during post-flight creation with pilot confirmation; trip purpose field added for compliance. POS report fuel entry enhancements - Fuel values can be entered as decimals or pounds (e.g., 24.5 or 24,500 lbs). Training and simulator support - Flight Events and Microsoft Flight Simulator are now supported as simulated GPS sources for ground-based training. Improved GPS status visibility - Clear confirmation of the active Bluetooth GPS providing position data. Automatic checklist downloads - Assigned custom checklists are downloaded automatically at app start. POS report label improvements - Updated labels and layout aligned with training and best practices. Custom keyboard and performance improvements

ARINC format waypoint layer - New chart layer displaying ARINC waypoints for improved situational awareness. ARINC format converter - Quickly convert between ARINC and lat/long formats to reduce the risk of GNE. Improved waypoint information and layout - Waypoints now show ARINC and lat/long equivalents, plus distance from the aircraft. Chart search improvements - Faster chart search to quickly locate waypoint information. Journey Logbook improvements - Table of contents – Easier navigation within the journey logbook. - Closeout reminder – Post-flight reminder to create your journey logbook. - Pilot-confirmed signature and trip purpose (ICAO Annex 6) – Sign your logbook during post-flight creation with pilot confirmation; trip purpose field added for compliance. POS report fuel entry enhancements - Fuel values can be entered as decimals or pounds (e.g., 24.5 or 24,500 lbs). Training and simulator support - Flight Events and Microsoft Flight Simulator are now supported as simulated GPS sources for ground-based training. Improved GPS status visibility - Clear confirmation of the active Bluetooth GPS providing position data. Automatic checklist downloads - Assigned custom checklists are downloaded automatically at app start. POS report label improvements - Updated labels and layout aligned with training and best practices. Custom keyboard and performance improvements

Stability and Performance Improvements - Fixed issue that could result in app performance slowdowns. - Improved Stratus GPS invalid-data filtering. Journey Logbook fix - Fix issue with PACOTs included in Journey Logbook PDF Performance Improvements - iPad OS 26 compatibility fixes along with a variety of bug fixes and performance improvements. New chart layout - A completely redesigned chart user interface with a cleaner look and feel. Improved Menu Options - A streamlined menu layout to include Settings, Pilot Account & Aircraft, Subscriptions, and Support. FIR Line Style Improvements - FIR boundaries are now rendered with improved line styling to be more consistent with ICAO guidance. Enhanced Measuring Tool - Now displays distance, plus both Initial and Average True and Magnetic course headings. Flight Data Bar and Next Waypoint Display Improvements - The flight data information has been redesigned into a more readable and standard flight data bar. Additionally, both the Next Waypoint Course / Distance flags and the Flight Data Bar are now toggled on from the Chart Layers menu. Improved Chart Label Readability - Airways, navaids, and waypoint labels are now larger and easier to read. Terminology Update for Oceanic - To ensure clarity and alignment with official terminology, "Coast Out" and "Coast In" have been replaced with "Oceanic Entry Point" and "Oceanic Exit Point" across the application.

Journey Logbook fix - Fix issue with PACOTs included in Journey Logbook PDF Performance Improvements - iPad OS 26 compatibility fixes along with a variety of bug fixes and performance improvements. New chart layout - A completely redesigned chart user interface with a cleaner look and feel. Improved Menu Options - A streamlined menu layout to include Settings, Pilot Account & Aircraft, Subscriptions, and Support. FIR Line Style Improvements - FIR boundaries are now rendered with improved line styling to be more consistent with ICAO guidance. Enhanced Measuring Tool - Now displays distance, plus both Initial and Average True and Magnetic course headings. Flight Data Bar and Next Waypoint Display Improvements - The flight data information has been redesigned into a more readable and standard flight data bar. Additionally, both the Next Waypoint Course / Distance flags and the Flight Data Bar are now toggled on from the Chart Layers menu. Improved Chart Label Readability - Airways, navaids, and waypoint labels are now larger and easier to read. Terminology Update for Oceanic - To ensure clarity and alignment with official terminology, "Coast Out" and "Coast In" have been replaced with "Oceanic Entry Point" and "Oceanic Exit Point" across the application.

Performance Improvements - iPad OS 26 compatibility fixes along with a variety of bug fixes and performance improvements. New chart layout - A completely redesigned chart user interface with a cleaner look and feel. Improved Menu Options - A streamlined menu layout to include Settings, Pilot Account & Aircraft, Subscriptions, and Support. FIR Line Style Improvements - FIR boundaries are now rendered with improved line styling to be more consistent with ICAO guidance. Enhanced Measuring Tool - Now displays distance, plus both Initial and Average True and Magnetic course headings. Flight Data Bar and Next Waypoint Display Improvements - The flight data information has been redesigned into a more readable and standard flight data bar. Additionally, both the Next Waypoint Course / Distance flags and the Flight Data Bar are now toggled on from the Chart Layers menu. Improved Chart Label Readability - Airways, navaids, and waypoint labels are now larger and easier to read. Terminology Update for Oceanic - To ensure clarity and alignment with official terminology, "Coast Out" and "Coast In" have been replaced with "Oceanic Entry Point" and "Oceanic Exit Point" across the application.

New chart layout - A completely redesigned chart user interface with a cleaner look and feel. Improved Menu Options - A streamlined menu layout to include Settings, Pilot Account & Aircraft, Subscriptions, and Support. FIR Line Style Improvements - FIR boundaries are now rendered with improved line styling to be more consistent with ICAO guidance. Enhanced Measuring Tool - Now displays distance, plus both Initial and Average True and Magnetic course headings. Flight Data Bar and Next Waypoint Display Improvements - The flight data information has been redesigned into a more readable and standard flight data bar. Additionally, both the Next Waypoint Course / Distance flags and the Flight Data Bar are now toggled on from the Chart Layers menu. Improved Chart Label Readability - Airways, navaids, and waypoint labels are now larger and easier to read. Terminology Update for Oceanic - To ensure clarity and alignment with official terminology, "Coast Out" and "Coast In" have been replaced with "Oceanic Entry Point" and "Oceanic Exit Point" across the application. Performance Improvements - A variety of bug fixes and performance improvements.

Weather - Worldwide graphical METAR/TAF weather is now available. - Weather is presented via the chart, as well as in the airport and ETP properties. - METAR symbols follow standard sky coverage and flight category conventions. - Internet connectivity is required for inflight updates. Tracks - Track details are now resizable and can be viewed on-screen simultaneously with flight plan information and other plotting chart tools. - The Eastbound and Westbound tracks' identifying labels have been improved for readability. - Directional arrows have been added to the tracks layer for readability. Plotting Chart Tools - Oceanic Flight Reminders can now be set at 5 or 10-minute intervals in the Preflight Wizard (defaults to 10). - 5/10 minute checks are automatically recorded in a position report if one has been created, including a timestamp of when it was completed. - Oceanic Flight Reminders are now presented when viewing the ICRH. ETPs - ETP properties redesigned for improved scannability. - ETP chart arrows now include current METAR information. - ETP chart arrows now default to visible to provide METAR information for ETP alternates at a glance. Chart - Improved airport display filtering to reduce chart clutter. - Airport label and icon colors for day/night changed to a more traditional blue to represent airports. - Larger airport symbols and labels to improve readability. - The chart layers menu was reorganized to support quicker layer selection. Airport and waypoint properties - Airport and waypoint properties have been redesigned to better present information needed when viewing. - The notes popover for airports and waypoints is now dismissed via a ‘Done’ button and will not be dismissed inadvertently. Journey Logbook - Improved button placement and layout. - Lat/long entry is now easier with simplified entry screens. Route Editing - The original and updated flight plans are included in the journey logbook output to support the scenario where an aircraft receives an updated flight plan inflight before crossing. - The preflight wizard will process a new flight plan and present the amended route information to the pilot for verification in text and graphical form. Sync - Sync connection visual design improvements to streamline connect, disconnect, and reconnect scenarios. Data recovery - Added support for restoring a journey logbook to the most recent valid data point in the event of inflight data corruption. - Backup snapshots of the journey logbook are recorded every five minutes. In the event the current journey logbook is corrupted, the pilot is able to restore to the most recent valid data. - This supplements the data recovery functionality available in 3.3 to prevent accidental Sync overwrites on the Secondary device. Maintenance - Flight plan title now better describes the selected flight plan associated with an ATC Directed Change. - New resizable chart notepad. - Fix for chart notepad updates while synced. - Addressed an issue where the POS Report waypoint name was not included in the JLB PDF output. - Layout improvements for custom checklists both in flight and in the journey logbook output. - Corrections to FIR CPDLC logon addresses. - Numerous bug fixes and performance improvements.

Weather - Worldwide graphical METAR/TAF weather is now available. - Weather is presented via the chart, as well as in the airport and ETP properties. - METAR symbols follow standard sky coverage and flight category conventions. - Internet connectivity is required for inflight updates. Tracks - Track details are now resizable and can be viewed on-screen simultaneously with flight plan information and other plotting chart tools. - The Eastbound and Westbound tracks' identifying labels have been improved for readability. - Directional arrows have been added to the tracks layer for readability. Plotting Chart Tools - Oceanic Flight Reminders can now be set at 5 or 10-minute intervals in the Preflight Wizard (defaults to 10). - 5/10 minute checks are automatically recorded in a position report if one has been created, including a timestamp of when it was completed. - Oceanic Flight Reminders are now presented when viewing the ICRH. ETPs - ETP properties redesigned for improved scannability. - ETP chart arrows now include current METAR information. - ETP chart arrows now default to visible to provide METAR information for ETP alternates at a glance. Chart - Improved airport display filtering to reduce chart clutter. - Airport label and icon colors for day/night changed to a more traditional blue to represent airports. - Larger airport symbols and labels to improve readability. - The chart layers menu was reorganized to support quicker layer selection. Airport and waypoint properties - Airport and waypoint properties have been redesigned to better present information needed when viewing. - The notes popover for airports and waypoints is now dismissed via a ‘Done’ button and will not be dismissed inadvertently. Journey Logbook - Improved button placement and layout. - Lat/long entry is now easier with simplified entry screens. Route Editing - The original and updated flight plans are included in the journey logbook output to support the scenario where an aircraft receives an updated flight plan inflight before crossing. - The preflight wizard will process a new flight plan and present the amended route information to the pilot for verification in text and graphical form. Sync - Sync connection visual design improvements to streamline connect, disconnect, and reconnect scenarios. Data recovery - Added support for restoring a journey logbook to the most recent valid data point in the event of inflight data corruption. - Backup snapshots of the journey logbook are recorded every five minutes. In the event the current journey logbook is corrupted, the pilot is able to restore to the most recent valid data. - This supplements the data recovery functionality available in 3.3 to prevent accidental Sync overwrites on the Secondary device. Maintenance - Flight plan title now better describes the selected flight plan associated with an ATC Directed Change. - New resizable chart notepad. - Fix for chart notepad updates while synced. - Addressed an issue where the POS Report waypoint name was not included in the JLB PDF output. - Layout improvements for custom checklists both in flight and in the journey logbook output. - Numerous bug fixes and performance improvements.

Weather - Worldwide graphical METAR/TAF weather is now available. - Weather is presented via the chart, as well as in the airport and ETP properties. - METAR symbols follow standard sky coverage and flight category conventions. - Internet connectivity is required for inflight updates. Tracks - Track details are now resizable and can be viewed on-screen simultaneously with flight plan information and other plotting chart tools. - The Eastbound and Westbound tracks' identifying labels have been improved for readability. - Directional arrows have been added to the tracks layer for readability. Plotting Chart Tools - Oceanic Flight Reminders can now be set at 5 or 10-minute intervals in the Preflight Wizard (defaults to 10). - 5/10 minute checks are automatically recorded in a position report if one has been created, including a timestamp of when it was completed. - Oceanic Flight Reminders are now presented when viewing the ICRH. ETPs - ETP properties redesigned for improved scannability. - ETP chart arrows now include current METAR information. - ETP chart arrows now default to visible to provide METAR information for ETP alternates at a glance. Chart - Improved airport display filtering to reduce chart clutter. - Airport label and icon colors for day/night changed to a more traditional blue to represent airports. - Larger airport symbols and labels to improve readability. - The chart layers menu was reorganized to support quicker layer selection. Airport and waypoint properties - Airport and waypoint properties have been redesigned to better present information needed when viewing. - The notes popover for airports and waypoints is now dismissed via a ‘Done’ button and will not be dismissed inadvertently. Journey Logbook - Improved button placement and layout. - Lat/long entry is now easier with simplified entry screens. Route Editing - The original and updated flight plans are included in the journey logbook output to support the scenario where an aircraft receives an updated flight plan inflight before crossing. - The preflight wizard will process a new flight plan and present the amended route information to the pilot for verification in text and graphical form. Sync - Sync connection visual design improvements to streamline connect, disconnect, and reconnect scenarios. Data recovery - Added support for restoring a journey logbook to the most recent valid data point in the event of inflight data corruption. - Backup snapshots of the journey logbook are recorded every five minutes. In the event the current journey logbook is corrupted, the pilot is able to restore to the most recent valid data. - This supplements the data recovery functionality available in 3.3 to prevent accidental Sync overwrites on the Secondary device. Maintenance - Flight plan title now better describes the selected flight plan associated with an ATC Directed Change. - New resizable chart notepad. - Fix for chart notepad updates while synced. - Addressed an issue where the POS Report waypoint name was not included in the JLB PDF output. - Numerous bug fixes and performance improvements.

Weather - Worldwide graphical METAR/TAF weather is now available. - Weather is presented via the chart, as well as in the airport and ETP properties. - METAR symbols follow standard sky coverage and flight category conventions. - Internet connectivity is required for inflight updates. Tracks - Track details are now resizable and can be viewed on-screen simultaneously with flight plan information and other plotting chart tools. - The Eastbound and Westbound tracks' identifying labels have been improved for readability. - Directional arrows have been added to the tracks layer for readability. Plotting Chart Tools - Oceanic Flight Reminders can now be set at 5 or 10-minute intervals in the Preflight Wizard (defaults to 10). - 5/10 minute checks are automatically recorded in a position report if one has been created, including a timestamp of when it was completed. - Oceanic Flight Reminders are now presented when viewing the ICRH. ETPs - ETP properties redesigned for improved scannability. - ETP chart arrows now include current METAR information. - ETP chart arrows now default to visible to provide METAR information for ETP alternates at a glance. Chart - Improved airport display filtering to reduce chart clutter. - Airport label and icon colors for day/night changed to a more traditional blue to represent airports. - Larger airport symbols and labels to improve readability. - The chart layers menu was reorganized to support quicker layer selection. Airport and waypoint properties - Airport and waypoint properties have been redesigned to better present information needed when viewing. - The notes popover for airports and waypoints is now dismissed via a ‘Done’ button and will not be dismissed inadvertently. Journey Logbook - Improved button placement and layout. - Lat/long entry is now easier with simplified entry screens. Route Editing - The original and updated flight plans are included in the journey logbook output to support the scenario where an aircraft receives an updated flight plan inflight before crossing. - The preflight wizard will process a new flight plan and present the amended route information to the pilot for verification in text and graphical form. Sync - Sync connection visual design improvements to streamline connect, disconnect, and reconnect scenarios. Data recovery - Added support for restoring a journey logbook to the most recent valid data point in the event of inflight data corruption. - Backup snapshots of the journey logbook are recorded every five minutes. In the event the current journey logbook is corrupted, the pilot is able to restore to the most recent valid data. - This supplements the data recovery functionality available in 3.3 to prevent accidental Sync overwrites on the Secondary device. Maintenance - Numerous bug fixes and performance improvements.

- iPadOS 18 critical fixes. - This update is REQUIRED if you are going to update to iPadOS18. - Changes to several CPDLC addresses - Bug fixes

- Bug fix affecting AAA users

Route edit improvements - Route editing is now available from the horizontal waypoint list while viewing the Scott Plot chart. - Tap the new route edit icon to enable the ability to add or delete waypoints. - Undo and redo functionality allows for quick reversal of route edit errors. - Option to save a record of the original route. When checked, this will preserve your original route of flight on the chart and include it in the journey logbook. - Crews can now automatically change a route from an updated flight plan in the Preflight Wizard while preserving existing flight data. Preflight Wizard - Preflight Wizard Plot ETPs step moved after the Build Route for an improved Preflight Wizard workflow. Checklist - Updates to the Scott IPC Oceanic Checklist are now automatically downloaded to the device. Navigation Search - New Exact match functionality. When using the Navigation Search function on the chart or during a route edit, there is now an option for ‘Exact Match’ to streamline searching for airports, navaids, waypoints and airways. NAT/PAC Track Details - NAT/PAC track updates are now available inflight by tapping the refresh button when viewing track details. During Sync System use, only the Primary device has this functionality. ETP extraction - Additional flight plan format support for automatic ETP extraction when creating a new flight. - Various bug fixes

Route edit improvements - Route editing is now available from the horizontal waypoint list while viewing the Scott Plot chart. - Tap the new route edit icon to enable the ability to add or delete waypoints. - Undo and redo functionality allows for quick reversal of route edit errors. - Option to save a record of the original route. When checked, this will preserve your original route of flight on the chart and include it in the journey logbook. - Crews can now automatically change a route from an updated flight plan in the Preflight Wizard while preserving existing flight data. Preflight Wizard - Preflight Wizard Plot ETPs step moved after the Build Route for an improved Preflight Wizard workflow. Checklist - Updates to the Scott IPC Oceanic Checklist are now automatically downloaded to the device. Navigation Search - New Exact match functionality. When using the Navigation Search function on the chart or during a route edit, there is now an option for ‘Exact Match’ to streamline searching for airports, navaids, waypoints and airways. NAT/PAC Track Details - NAT/PAC track updates are now available inflight by tapping the refresh button when viewing track details. During Sync System use, only the Primary device has this functionality. ETP extraction - Additional flight plan format support for automatic ETP extraction when creating a new flight. - Various bug fixes

Route edit improvements - Route editing is now available from the horizontal waypoint list while viewing the Scott Plot chart. - Tap the new route edit icon to enable the ability to add or delete waypoints. - Undo and redo functionality allows for quick reversal of route edit errors. - Option to save a record of the original route. When checked, this will preserve your original route of flight on the chart and include it in the journey logbook. - Crews can now automatically change a route from an updated flight plan in the Preflight Wizard while preserving existing flight data. Preflight Wizard - Preflight Wizard Plot ETPs step moved after the Build Route for an improved Preflight Wizard workflow. Checklist - Updates to the Scott IPC Oceanic Checklist are now automatically downloaded to the device. Navigation Search - New Exact match functionality. When using the Navigation Search function on the chart or during a route edit, there is now an option for ‘Exact Match’ to streamline searching for airports, navaids, waypoints and airways. NAT/PAC Track Details - NAT/PAC track updates are now available inflight by tapping the refresh button when viewing track details. During Sync System use, only the Primary device has this functionality. ETP extraction - Additional flight plan format support for automatic ETP extraction when creating a new flight.

- Update for the Scott IPC Oceanic Checklist that reflects the NEW Oceanic Clearance Removal Procedures

- DUAL XGPS: Improved position tracking when app is in the background - Various bug fixes

- DUAL XGPS: Improved position tracking when app is in the background - Various bug fixes

Checklist - New v2.0 checklist to align with the International Cockpit Reference Handbook (ICRH) new recommended checklist. - New expandable checklist capability. - Custom checklist editing improvements. Dead Reckoning Tool - The Dead Reckoning tool has improved considerably to provide better course estimation accuracy and ease of use during navigational disruption. - The redesign of the Dead Reckoning tool additionally allows pilots to familiarize themselves with the DR navigation functionality in a simulated training environment. GPS - Bad Elf Flex Mini now supported as another external GPS option. - Number of satellites and battery status now provided for Bad Elf and Stratus units. - Sync will automatically reconnect the secondary to the primary’s GPS location in the event of a sync disconnect or lost scenario. Distance, Speed, Time Calculator - Enter any two of three values (knots, nautical miles, or minutes) to auto-calculate the third. Position Report - AT time passing a fix is now automatically recorded using GPS location. Journey Logbook - Checkboxes added to indicate which FMS is the Master Clock for the flight. - Compass headings can now be recorded in the Journey Logbook. Automatic ETP creation - Several new formats are now supported. - Other fixes Subscription Status - The settings gear now contains subscription status information for Scott Plot and the ICRH. - In-app banner alerts of expiring subscriptions within 30 days to prevent service interruption. Additional Data Recovery Protection - A current or previous Journey Logbook can be recovered in the event of iPad damage or operating system issues. Sync Improvements - A new countdown timer has been integrated into the sync connection process, displaying the remaining time before the Sync iPad search expires to indicate the time left to establish the connection. Airspace and chart - North Atlantic and NAT Surveillance airspace updates with individual layer controls. - ETP alternate airport labels now stand out better. - Off-route warning now includes an option to accept and silence. - ETP arrows made slightly larger. Various bug fixes

Checklist - New v2.0 checklist to align with the International Cockpit Reference Handbook (ICRH) new recommended checklist. - New expandable checklist capability. - Custom checklist editing improvements. Dead Reckoning Tool - The Dead Reckoning tool has improved considerably to provide better course estimation accuracy and ease of use during navigational disruption. - The redesign of the Dead Reckoning tool additionally allows pilots to familiarize themselves with the DR navigation functionality in a simulated training environment. GPS - Bad Elf Flex Mini now supported as another external GPS option. - Number of satellites and battery status now provided for Bad Elf and Stratus units. - Sync will automatically reconnect the secondary to the primary’s GPS location in the event of a sync disconnect or lost scenario. Distance, Speed, Time Calculator - Enter any two of three values (knots, nautical miles, or minutes) to auto-calculate the third. Position Report - AT time passing a fix is now automatically recorded using GPS location. Journey Logbook - Checkboxes added to indicate which FMS is the Master Clock for the flight. - Compass headings can now be recorded in the Journey Logbook. Automatic ETP creation - Several new formats are now supported. - Other fixes Subscription Status - The settings gear now contains subscription status information for Scott Plot and the ICRH. - In-app banner alerts of expiring subscriptions within 30 days to prevent service interruption. Additional Data Recovery Protection - A current or previous Journey Logbook can be recovered in the event of iPad damage or operating system issues. Sync Improvements - A new countdown timer has been integrated into the sync connection process, displaying the remaining time before the Sync iPad search expires to indicate the time left to establish the connection. Airspace and chart - North Atlantic and NAT Surveillance airspace updates with individual layer controls. - ETP alternate airport labels now stand out better. - Off-route warning now includes an option to accept and silence. - ETP arrows made slightly larger. Various bug fixes

- NAT Surveillance Airspace Update.

- Sync connection button now only exposed for Plotting Chart.

- Fixes issue to prevent unintentional chart and flight plan annotations in touch mode. - Added a “Done” button to the waypoint position report allowing simultaneous interaction of position report and flight plan PDF. - Stability improvements - Fix for Bad Elf GPS Pro, Pro+, and DUAL 150/160 connections

- Added a “Done” button to the waypoint position report allowing simultaneous interaction of position report and flight plan PDF. - Stability improvements - Fix for Bad Elf GPS Pro, Pro+, and DUAL 150/160 connections

Critical Bug Fix - Fix for Bad Elf GPS Pro, Pro+ and DUAL 150/160 connections Night Mode - Night mode now available, optimized by a human factors design team, including pilots for optimal application use at night - View the chart, flight plans, and documents in day or night mode themes - Set to day, night, or sync to your iPad's light or dark display setting International Cockpit Reference Handbook (ICRH) - The ICRH now supports adding notes, highlights, and bookmarks to pages. Highlight, bookmark, or underline critical information for quick future reference - Any added bookmarks, notes, or highlights are stored locally and on the cloud for easy retrieval and redundancy - All new table of contents layout for easier navigation - SOP Walkthrough section is now highlighted to better match initial and recurrent training - Additional page viewing options to customize ICRH use Chart and Document Annotations - Improved user experience with chart and document annotation tools - Add notes and highlights to flight bag documents Split Screen - Use Scott Plot side by side with your favorite application with our all-new split screen support - Choose from several split screen layouts based on your in-flight procedures - Portrait and landscape capabilities NotePad - Quickly add chart notes while enroute using our new notepad functionality - Move the notepad to the optimal chart location and leave it - All notes will automatically be included in your completed journey logbook Other 3.1 improvements - 2LE ETP support is now available for three-engine operations - Medical ETPs are now blue, Other category ETPs are now black - Preflight Wizard workflow streamlined for more intuitive use and navigation - FIR names are now included on boundary lines - Larger font sizes for enroute GS, ETE, and LEG DIST REM for improved readability