fix some bug.

V1.1.3.2主要更新 2018/7/12 1. Fixed an issue where GroupSolo was not displaying properly. 2. Modified the FullMixer interface fader image, adding the green bar display when pushing 3.EQ/PEQ Flat logic adjustment (can be operated under any circumstances) 4.EQ map correction (when 20KHz is pulled to the right, it is not convenient to drag operation) 5. Keep in line with the machine, modify all mS to ms lowercase 6. When the LongFader interface pops up a warning dialog box, the processing mode is consistent with the host. 7. Fixed the problem that the COPY function could not select CH2 and CH10. 8.FullMixer page push to the top will cover the channel name problem 9.Gate/Comp affects the power lamp when switching 10.APP FULL MIXER interface When the channel LINK is used, one of the channels in the first row will light up. And the host won't 11.APP DCA interface The lower right corner of the English display is not complete. Not consistent with the host 12. Fixed the problem that the Solo of the Main channel can be turned on and off. 13. Fixed the problem that the parameter adjustment name on the fader does not switch when the FX1/FX2 interface switching parameter adjustment is fixed. 14. Fixed PEQ interface FREQUENCY, GAIN button Slow sliding parameter value error 15. Fixed FX page, Tremolo/Flanger/Chorus/FlangerRev/ChorusRev When adjusting, the parameters are not correct with the host. 16. Fixed channel name display problem after AUX1-8link 17. Fixed APPPEQ interface selection EQ1-4 Select Q After switching to N.C, the fader does not move. 18. The APP MIXER interface selects the DCA1-6 error box and will pop up all the time. Instead of clicking OK once, it will not pop up. 19. Fixed the problem of channel synchronization by pressing the up, down, left and right buttons on the machine side. 20. Fixed that switching from the FullMix interface to the DCAFader interface would randomly illuminate a SoLo problem. 21: Fixed a problem with splash screens when EQ ON/OF and type switching 22: Fixed an issue where the APP C Strip interface selected MAIN, the error was displayed, the LINK button was added, and the ASSIGN interface could be switched and the host could not switch. 23. Fixed the problem that the GATE button will change to MIXER when switching to the MIXER interface. 24. Fix the English mark on the APP GATE interface fader as parameter threshold, the parameter attack fader above the value shows error 25. Correct the APP COMP interface parameter threshold, parameter attack, parameter release, parameter comp ratio fader above the value display error 26. When the APP is connected to the host, restarting the host APP cannot be connected back. 27. Fix APP PEQ interface to select EQ1-4 mobile fader, then close EQ and then open EQ fader will not return to the previous position, no memory function problem 28. Fix the stuck hole that will be introduced when Led refreshes --------- please use the hardware version:v1.2

- Fixed the bug when detect device could not return the device name. - Add refresh button to refresh connection

Increase scroll function at the home page