Version 1.10.2 - Major release. NEW • System HealthCheck - one-click installation verification, results visible on frogDisplays, frogStations and in frogControl • Major Bluetooth Mesh stability improvements • Direct Bluetooth backup mode provisioning • frogStrip RGBW per-channel control, GPS Box fixes • Includes frogWare 1.10.2 firmware IMPORTANT - Full system update required. For details, see frogblue.com or contact your frogblue partner.

General stability, performance, and security enhancements. Various bug fixes and optimisations for a smoother experience.

Added integration for frogTerminal and frogStation, enabling seamless incorporation of decentralised access control and infrastructure-free automation into frogblue projects. Now supports the frogDALI range, allowing control of entire DALI lighting circuits (up to 64 lights) from anywhere in the world via frogblue, with a single DALI frog. General stability, performance, and security enhancements. Various bug fixes and optimisations for a smoother experience.

New functions - Support for new devices - frogStrip120e, frogDALI, frogHeatBar - New input and output functions - Transition time for brightness changes - Save & load dim curves - Update of frogDisplay via frogProject - New heating control - Testing of the system for conformity Improvements - Menu bar grouped by functions - Function macros - Status messages for reed contacts of the frogMultiSense activated (can reduce battery life) - Saving and writing of output states during frogware update - Improved connection setup under Windows - frogAccess: Message triggering with bell button - Standard dead time for frogMotion PIR 5 sec. Bugfixes - Replacing a device permanently shows "Configuration update necessary". - Restriction to "room" or "area" for followers without function - Synchronisation of outputs at type message without function More new functions, improvements and bug fixes in the release notes at www.frogblue.com

Bug fixes - Changing the project overwrites the project in rare cases - Possible crash when configuring a frogDisplay - Text in the shading wizard outside the window - Exported project cannot be changed - LED output of frogMotion cannot be deleted - Android11: Access to frogware file not possible - Replacing a unit shows "Config update necessary" permanently - "Switch off after" time not set for entry ”value" - Leap year calculated incorrectly

Important on update from Version 1.5.x to 1.7.x: Due to the modified configuration for blinds (shutters and other window coverings or shadings), it may be necessary to reconfigure the outputs and inputs of frogblue relay modules. In order to initially display the correct position status in the frogDisplay or frogblueHome, it is recommended to move all shutters once to both end positions. The frogblue ProjectApp converts existing inputs and outputs for blinds/window coverings to the updated settings. After the update, please check for correct functioning.
Where subsequent changes are made, automatically converted inputs and outputs must be recreated and reconfigured. Changes - Write backup to devices with battery supply (frogKey/frogContact5-BAT/frogMultiSense/frogRoomSense) prevented - Off-warning flashes independent of dimmable or non-dimmable illuminant - Improvements in the menu item "Time" for shutter configuration - Improvements in the menu item "Shutter settings" - Heating control: activation of emergency mode after temperature sensor failure increased from one to two hours - New output macros for shutter Bug fixes - Fixed flickering of frogAccess key illumination at low ambient brightness - frogMultiSense: exceeding or falling below a temperature or brightness triggers correct message (on every wake-up the message is sent if the condition is met) - Switch off after configured time was not executed on the second output of a device - Messages with range limitation "Area" were not executed on frog that was sending the message - Some messages were marked red although the message is present in the system

Important on update from Version 1.5.x to 1.7.x: Due to the modified configuration for blinds (shutters and other window coverings or shadings), it may be necessary to reconfigure the outputs and inputs of frogblue relay modules. In order to initially display the correct position status in the frogDisplay or frogblueHome, it is recommended to move all shutters once to both end positions. The frogblue ProjectApp converts existing inputs and outputs for blinds/window coverings to the updated settings. After the update, please check for correct functioning.
Where subsequent changes are made , automatically converted inputs and outputs must be recreated and reconfigured. Bug fixes - Fixed a problem with shutter controls and "Ignore TYPE messages" - Solved problem with „In room“ message restriction - Solved problem with timed shading movement and gate

Important on update from Version 1.5.x to 1.7.x: Due to the modified configuration for blinds (shutters and other window coverings or shadings), it may be necessary to reconfigure the outputs and inputs of frogblue relay modules. In order to initially display the correct position status in the frogDisplay or frogblueHome, it is recommended to move all shutters once to both end positions. The frogblue ProjectApp converts existing inputs and outputs for blinds/window coverings to the updated settings. After the update, please check for correct functioning.
Where subsequent changes are made , automatically converted inputs and outputs must be recreated and reconfigured. Improvements - Default values for status hold time changed - Default setting „LED back“ of frogBoxGPS changed to „Custom“ - Default setting „LED“ of frogMultiSense and frogRoomSense changed to „Off" Bug fixes - New added frogs can only be updated after first connection - Saved scenes do not work after writing them to frogDisplay - frogLink Textmode: type messages are not available in rooms - Status „Brightness“ above/below reversed

Important when updating from frogblueProject version 1.5.x to 1.7.x: Due to the changed configuration of the shading it may be necessary to reconfigure the outputs and inputs of the frogblue relay modules! In order to initially display the correct position status in the frogDisplay or the frogblueHome on the smartphone/tablet, it is recommended to move all shades once to both end positions. The frogblue ProjectApp converts existing inputs and outputs of the shading to the updated settings. After the update, the correct function should be checked. Automatically converted inputs and outputs must be subsequently recreated and reconfigured in case of changes. Improvements - Display of humidity for frogRoomSense - Notification if maximum number of PIN numbers for frogAccess is exceeded - Limitation to 6-digit PIN numbers - NTP server for frogDisplay configurable via frogblueProject - Message window after clearing device cache - Control bar in message log divided into basic and expert view - File name extended by date and time when exporting the message log - LED of frogMultiSense and frogRoomSense can be deactivated in expert settings Bug fixes - Rare crash during project change - Click settings -> double-click and long-click speed swapped - Status configuration of a status message: TRUE/FALSE swapped - Erroneous behavior with long click frogKey - frogAccess is not found under Windows - During an update, the connection to a device is sometimes not terminated

### New features - Support for current and future product innovations - Blinds/shutters/window converting control reworked - A new level: 'Areas' - New additional output types - New additional input types - and many more ### Bugfixes - High frequency flickering on some LED drivers/LED lamps repaired - Improved connection - and many more Further details can be found in the release notes at www.frogblue.com

New functions: Indication of a better time server when adding devices Changing tablet-language possible Default values of message relaying adopted Network key can be changed Shutter movement to position/time (frogRelay2-2) Measurement of shutter closing/reverse time (frogRelay2-2) Expanded time range for click settings and debounce Bugfixes: Windows: Project was exported to wrong folder Device was no longer visible, if containing room was deleted Miscellaneous error fixes

Compatible frogware: 1.5 (frogware_2019-097-10.fbfw) Improvements - Screensaver will only be disabled during when necessary - Simplified deletion of configuration entries - Room filter function in Device manager added - „Reset“, „Reboot device“ and „Clear device cache“ will automatically establish connections - Recent project can be opened from Start screen - Secondary time server will not be set automatically - Secondary time server can be deactivated - Search devices dialog allows adding devices more than once - Switch-off warning also for actors - Switch-off warning by blinking for not dimmable outputs - Simplified possibility to establish a connection for battery devices (any click action) - Improved workflow when deleting and reseting devices - Many GUI improvements Bugfixes - Local backup without function - Gate states not correctly shown - End position recognition in shutter mode - Power log faulty - Faulty status information after switching outputs - Many other bug fixes Additional information: http://www.frogblue.com

Compatible frogware: 1.5 (frogware_2019-07-12.fbfw) Improvements - 80ms default debounce time for inputs. Debounce time can be configured from 60 ms to 250 ms. - Increased the default click time to 350 ms. - Toggle and dim synchronization even if no local output is controlled (e.g. toggle of multiple lamps with frogIn5-AC). - Improved power measurement on actors. - Reseting to factory default with reset key only possible within 3 minutes after power supply. - Power limit for all outputs. If an output is operated beyond power limitation it will turn off after 5 seconds. - Visualization of power limit. - Secondary time frog. If primary time frog fails the secondary will take over. The time frogs should be operated on different fuses. - Room filer in device manager. - Adjusted presets for input type „Motion“ (Trigger -> Rising, Minimal On -> 10 minutes). Bug fixes - Toggle behavior in factory defaults. - Dim-sync in combination with „Minimal On“. - Filter and sorting in adding devices and device manager improved. - Time-controlled gates improved. - Filter in device manager. - Display of status information in configuration view.

Compatible frogware: 1.5 (frogware_2019-07-12.fbfw) Improvements - 80ms default debounce time for inputs. Debounce time can be configured from 60 ms to 250 ms. - Increased the default click time to 350 ms. - Toggle and dim synchronization even if no local output is controlled (e.g. toggle of multiple lamps with frogIn5-AC). - Improved power measurement on actors. - Reseting to factory default with reset key only possible within 3 minutes after power supply. - Power limit for all outputs. If an output is operated beyond power limitation it will turn off after 5 seconds. - Visualization of power limit. - Secondary time frog. If primary time frog fails the secondary will take over. The time frogs should be operated on different fuses. - Room filer in device manager. - Adjusted presets for input type „Motion“ (Trigger -> Rising, Minimal On -> 10 minutes). Bug fixes - Dim-sync in combination with „Minimal On“. - Filter and sorting in adding devices and device manager improved. - Time-controlled gates improved. - Filter in device manager. - Display of status information in configuration view.

Compatible/included frogware Version: frogware_2019-05-27.fbfw (Frogs / frogKey: 1.4.0.0 - frogLink: 1.4.3.0) Enhancements: - support for frogLink "Text Mode" - updated translations - graphical changes - other bug fixes Known issues: - in rare cases, it is necessary to enter the frog Key again to connect to a frog

Features - copying or swapping input/output configuration of devices - message list can be exported to CSV file - message names can be renamed in message center - power log display improved - support for upcoming products - extended device list CSV export - file extension of frogware update file changed to ".fbfw" - automatic connection to a device for writing a configuration if device is in range - default parameter for input and output actions adjusted - writing configuration to a device with incompatible frogware is prevented Bug fixings - miscellaneous tablets could not write frogware updates to devices - miscellaneous tablets could not write any configuration to devices - graphical enhancements - improved stability - updated translations - other bug fixes Information frogblueProject 1.2 requires frogware version 1.4.0.0 or higher. The update of the frogware version can be executed in the device manager. The current frogware is included in the installation file of frogblueProject and does not have to be downloaded separately.

Bug has been fixed on importing projects.

Device manager received an update.

Improvements and bug fixes.