- Dark mode is now supported across the app. - New color and color-temperature controls for smart bulbs. - Smart thermostat controls now work reliably in every mode. - Camera live view, playback, and setup are smoother. - Camera firmware updates can now be viewed and applied from the app. - New step-by-step NFC tag shortcut wizard. - Watch app displays more panel types, partitions, and zones. - Scene builder is smoother and more accurate across partitions. - Notification delivery and appearance are more consistent. - Numerous stability improvements and bug fixes.

- Improve camera handling of push notifications on cold starts on certain cameras. - Resolved identification and handling issues on certain panels. - Fixed some bugs with the messenger and notifications. - Fixed a "Disarming..." indicator that could remain on screen after the system had disarmed. - Improved camera/doorbell support on certain devices. - The watch app now supports zone statuses. - Fixed an incorrect orange settings indicator on certain cameras until the SD Card screen had been opened. - Fixed a sensor zone occasionally listing the same state twice (e.g., "Tampered | Tampered"). - Activating or deactivating a scene on a multi-partition panel no longer resets the scene to partition 1. - Scanning certain non-validated cameras now shows a clearer prompt with options instead of failing partway through pairing. - Added motion tracking support for compatible cameras where the feature was missing. - Fixed several issues on multi-partition systems, including incorrect arming options and zones disappearing when switching partitions. - Improved sync of arming state and user permissions when returning to the app. - Reduced flicker and faster app launch on accounts with multiple systems. - Fixed a spurious "Failed to grant access" message when adding a user. - Fixed a rare crash when handling push notifications. - Disabled partitions are no longer shown on device, zone, and scene cards. - Improved the camera Event Reporting toggle with a loading indicator while changes apply. - Misc. bug fixes and improvements.

- Improved NFC support where applicable. - Added partition and cancel/confirm support in the watch app. - Improved sensor support for Open/Close scene triggers. - Added momentary open hardening. - Improved System Arming Level triggers to better support different panel types. - Improved live view aspect ratio support. - Various UI and prompt tweaks. - Added camera battery indicator where supported. - Fixed username sync issues. - Fixed some camera timezone issues. - Resolved issues between user sessions. - Fixed Zone notification device name not showing in notification title. - Resolved localization and notification issues. - General crash hardening. - Misc. bug fixes and improvements.

- Fixed some localization issues. - Fixed some camera aspect ratio issues. - Resolves some motion detection setting issues. - Adds some motion detection event context info where applicable. - Misc. bug fixes and improvements.

- Zone bypass prompt should now show where applicable during arming sequences. - Misc. bug fixes and improvements.

- Misc. bug fixes and improvements.

- Misc. bug fixes and improvements.

- Activity/Ignore/Privacy zone support has been improved on certain camera models. - PTZ support is now blocked on certain models when a privacy zone is active. - PTZ Calibrate/Home setting should now work where supported. - PTZ on certain camera models should now work by holding the buttons. - Improved support for larger accounts. - Misc. bug fixes and improvements.

- Resolved a doorbell enrollment issue that resulted in notifications not being configured initially. - Improved some enrollment steps on certain cameras. - Addresses an issue where sensor temperature would be invisible on certain panels. - Resolved a camera provisioning issue where certain text would get truncated if the user had Bold text accessibility option enabled. - Resolved some issues around SD Card reading/formatting in certain cameras. - Improved camera support. - Misc. bug fixes and improvements.

- Fixed a bug that caused the EULA acceptance screen to have buttons that matched the toolbar and were therefore impossible to see. - Resolved issues with two-way voice on certain doorbells. - Better handling of camera checking during enrollment against plan counts. - Resolved a bug for camera speaker settings on newer cameras. - Added initial scene name editing during creation. - Resolved an issue that prevented most z-wave devices from launching into their respective UIs from the device screen. - Resolved an issue that prevented certain camera provisioning attempts from succeeding. - Misc. bug fixes and improvements.

- Improved chime on open/close support. - Sending silence trouble beeps request now informs user that the request was sent. - Resolved issue where cancel/confirm feature setting wasn't captured in certain instances. - Improved chime managment support for partitioned systems. - Resolved a bug that prevented the global chime from showing the correct state. - Event log users should now match other platforms/clients. - Fixed a bug resulting in stalling when enrolling Onvif cameras. - Resolved a crash when removing an Onvif camera. - Resolved an issue where renaming a zone could see it flash back to the previous name due to a race condition with requesting the cached name immediately after. - Misc. bug fixes and improvements.

- Event log username alias lookup fix.

- Resolved an issue that could result in the wrong user alias showing in the event logs on certain devices.

- Resolved a crash that could occur when trying to manage certain cameras. - Improved zone/user information population in event logs. - Certain cameras will no longer show the disabled record button if that feature isn't supported at all. - Legacy panels now show some version and system information in the settings. - Demo mode user management crash and bug fixes. - Improved handling of a Z-wave related "Not Responding" text to prevent it from flashing and showing when a value was nil. - Watch app stability improvements. - Minor watch app UI changes to better support smaller watch screens. - Improved handling of session tokens. - Added AI notification handling from certain cameras. - Fixed an issue causing z-wave device battery icons to show when they weren't necessary. - Fixed a bug that caused multiple camera images to temporarily show in a single camera's cell when loading. - Zone names should now show correctly in the event log when supported. - Added support for new camera types. - The watch app should no longer show duplicate device entries. - Demo mode will now show the dealer info section. - Cleaned up some commands that were incorrectly being sent to the wrong panel types. - Peripherals and zones should not disappear anymore. - Demo mode notification issues resolved. - Resolved some issues preventing peripherals from being correctly shown on certain panels when they should be. - Added panic notification support. - Added support for new panel types with partition support. - Misc. bug fixes and improvements.

- Improved peripheral trouble handling. - The silence troubles button should now always be shown on the trouble screen. - Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported. - Added support for "snoozing" a walkthrough after initial dismissal on certain panels. - Misc. bug fixes and improvements.

- Resolved an issue preventing manual unbypassing bypassed zones on an older panel type.

- Added support for unbypassing bypassed zones manually on newer panel types. - Fixed some issues around event logs in Demo Mode including their persistence once you log out. - Event logs should now be pulled for all panel types. - Resolved an issue in the system selection popup that prevented certain systems from showing their current armed state. - Resolved an issue that prevented door lock logs from populating. - Added theme change support to a view controller where it was missing (used by the Events screen/tab). - Added watch support. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed an issue on iOS 18 iPad devices where a new tab bar style prevented system switching. - Resolved a login screen prompt issue related to connectivity. - Misc. bug fixes and improvements.

- Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales. - Crashing bug fixes. - Misc. bug fixes and improvements.

- Fixed some database read/write issues that resulted in unexpected bugs. - Misc. bug fixes and improvements.

- Resolves an issue that prevented selected notifications from appearing. - Misc. bug fixes and improvements.

- Crash fix related to certain cameras. - Misc. bug fixes and improvements.

- Crash fix related to certain cameras. - Misc. bug fixes and improvements.

- Fixes some UI issues around the Adaptive Brightness and LED settings where applicable. - Where applicable, remove stored pin when an invalid pin is used. - Resolves an issue where certain camera event logs may disappear and addresses an issue where the activity indicator in the same view may behave erratically. - Fixes an issue for certain cameras that didn't allow them to continue streaming if they had been backgrounded in the live view player. - Resolves an issue where clicking on a video notification when you were previously in the live video player could cause playback issues for the notification camera or not show the appropriate camera and require the user to relaunch the live view player. - Improved camera enrollment procedures for certain cameras. - Resolved an issue resulting in the validation step getting stuck on newer panels when trying to reset them. - Resolves a z-wave filtering issue that was occurring for some binary switches. - The event view controller's navigation bar no longer squeezes. - Reworded Reset panel options to be more consistent across devices. - Fixes an issue where event date wouldn't be displayed for certain cameras - Misc. bug fixes and improvements.