Flamconnect
Service Toolbelt
Free · Designed for iPad. Not verified for macOS.
The Flamconnect Service Toolbelt app will guide and support the service engineer to install, commission and service Flamco products. A valuable addition to your toolkit.
Just scan the product QR code and the app will connect to your Flamco device. Now you are ready to install the product with helpfull guidelines displayed in the app step by step. A wizard will guide you through the commissioning steps.
Need some indepth knowledge about the product? Just consult the documentation in the documentation menu.
When you need to service the product, do some analyses or need to change settings, enter the parameters menu where all product related items are listed.
Need some guidance in performing tasks? Go to the wizard section and find the wizard that will guide you through the process.
more March 2026
This release focuses on smoother installation, faster commissioning, and clearer operational control—making it easier than ever to work with your Flamco products.
• Smarter Alerts: Detailed error and warning descriptions are now shown for quicker troubleshooting.
• Clearer Alerts Overview: Active and historical alerts are clearly separated
• Simplified Commissioning Reports: Reports can now be created and sent with autofill for faster setup documentation.
• LogoEco Enhancements: Extended firmware version number is now visible in the app.
• Vacumat Eco Upgrade: Now supports the latest product version featuring an improved water filter and enhanced alarm functionality.
1.66.2 Apr 23
December 2025
This release delivers usability improvements, compatibility updates, and important bug fixes to enhance installation, commissioning, and operational control for all Flamco products.
- Added loading indicator to Settings and Commissioning screens to ensure changes can only be done after all device data is loaded.
- Navigation bar title reworked; product name is now clearly visible in the product details block for better readability.
- Compatibility checks performed for iOS 26’s Liquid Glass look-and-feel to ensure app stability with the latest iOS updates.
- Vacumat Eco RS485 and IP port settings are now displayed contextually
- Vacumat Eco and Flamcomat warnings and error descriptions improved; unknown errors now display clear and actionable messages in all supported languages.
- Vacumat Eco Slider of the Pressure set point and Safety valve setting now correctly update after reading device min/max values, reflecting the logical starting position of the slider.
- Vacumat Eco G4 pressure set point can now be adjusted to valid ranges per model, preventing unintended zero values and erratic slider behavior.
- LogoEco G2 HCW cooling mode is now view-only; mode switching is disabled to prevent misconfiguration.
- LogoEco G2 Dual UK article codes added; configurations differ only in images and commissioning flows.
- LogoEco G2 Primary flow LT and HT temperatures now displayed in the secondary system tab for supported LogoEco models.
- Logomatic G2 BE improvements implemented: naming conventions updated, dashboard temperature visibility added, energy note extended, unnecessary settings removed, and commissioning workflow fixed.
1.65.1 12/17/2025
Improvements
- You can now save commissioning settings and reuse them across multiple installations.
- Updated the pictures for LogoEco HCW Split for better accuracy.
- Return temperature for secondary circuit is now only shown when relevant.
- A clear checkmark symbol is used in place of the "V" for improved readability.
- The app now notifies you if Bluetooth access is required.
- Translations have been improved across multiple languages.
- Dynamic font sizes are applied at the top of several screens for more readability.
- The spinner during export of commissioning details is now positioned more intuitively.
Bug Fixes
- Fixed an issue where Service Requests could sometimes crash.
- Resolved a crash when adding a photo during commissioning.
- Fixed a bug where procedures could re-open multiple times unexpectedly.
- Improved Bluetooth stability on older devices.
1.64.2 09/29/2025
Changes in this version:
- Added new product LogoMatic G2 BE
- Added limited heating indicator for Return Temp Limiter
- Added support for new KWM modes on HVC units
- Added LT network mode and Primary Flow Under Temperature to LogoEco G2 HCW
- Added indication of spare part product numbers on all devices
- Added support for new Logotronic error codes
- Added confirmation when navigating back to ‘Scan QR’ to reduce rework
- Added new translations for Dutch, Danish, German, French and Swedish
- Updated pictures for the LogoEco G2 HCW D-Mixed
- Fixed issues with Vacumat Eco
- Fixed commissioning issue LogoEco G2 HCW D-Mixed regarding the weather compensation
- Performed general maintenance to keep the app up to date and made some small improvements
1.63.0 06/16/2025
Changes in this version:
- Added new HIU type: LogoEco G2 HCW D-Mixed (HIUs)
- Added Commissioning Report (General)
- Reset errors and warnings as last step of commissioning (General)
- Delete pump pressure safety (HIUs)
- Optimise read-out intervals (HIUs)
- Delete documentation screen (General)
- App maintenance (General)
1.58.4 12/10/2024
Changes in this version:
- Added new HIU type: LogoEco G2 HCW D-Mixed (HIUs)
- Added Commissioning Report (General)
- Reset errors and warnings as last step of commissioning (General)
- Delete pump pressure safety (HIUs)
- Optimise read-out intervals (HIUs)
- Delete documentation screen (General)
- App maintenance (General)
1.58.0 11/14/2024
Changes in this version:
- Improved errors and warnings for Heat interface units.
- Improvements for heat interface units to match latest firmware.
- Set separate cooling power capacity for Secos.
- Improved Bluetooth communication for Secos products.
New products
- Vacumat degassers.
- D-flow heat interface units.
1.54.0 07/22/2024
- Added cooling power for Secos devices.
- Added new devices.
- Updated range of cooling temperature for HCW units.
- Improved screed export.
- Fixed min and max values for some Flamcomat devices
- Fixed issue with showing false error events.
1.49.1 02/29/2024
The new version of this app contains the following.
New feature:
- App version history on the landing screen
- Other small improvements and bug fixes
1.44.0 10/05/2023
Fixed an issue with scanning the QR codes
1.43.1 09/21/2023
The new version of this app contains the following.
New features:
- New logo
- New translations
- Renamed Flamcomat PU to Flamcomat MP
- Changed Simplex Secos error codes to hexadecimal format
- Updated the looks of the switches
- Updated the scroll indicator
- Fixed time of errors and warnings
- Other small improvements and bug fixes
1.41.0 08/14/2023
New products:
- Logomatic G2 4RS now available in the app.
1.1.36 03/20/2023
The new version of this app contains the following.
New feaures:
- Request support via the app, share system and product settings
- Enable flashlight when scanning a QR-code
- Start and end times added to errors and warnings
- Small improvements and bug fixes
New products:
- Flamcomat MK-C G4
1.1.35 02/15/2023
- Flamcomat MK-C G4 product added
- Bugfixes
1.1.32 12/13/2022
New functions:
- Delete errors and warnings via the procedures on Heat Interface Units
- Indication will be given when a sensor is not connected (instead of the fixed value of -273,1°C)
- Improved feedback when connecting via bluetooth is not established
- Bug fixes and improved translations.
New products:
- Flamcomat G4 double pumped
- Flamcomat Grundfos pump
- LogoEco G2 HCW
- M10101.001
1.1.31 11/02/2022
Bugfixes that prevented commissioning from succeeding for Flamcomat G4 products
1.1.24 06/03/2022
Critical bugfixes for the LogoMatic G2 products:
- Heating mode once again functions as intended.
- DHW circulation temperature setting is adjusted to be no higher than the DHW temperature setting by the app. Writing the settings to the product fails if DHW circulation temperature is higher than DHW temperature as the product will not accept it. A text has also been added in the commissioning procedure to inform users.
1.1.22 05/09/2022
- A bug regarding LogoMatic G2 products that prevented the completion of commissioning procedures was solved.
1.1.21 04/21/2022
New product are added to the Flamconect App:
- Flamcomat MK-U G4
- Flamcomat G4 Remote
Improvements:
- Updated translations
- Fixed Bluetooth connections
- Margins in sliders optimized
- Secondary return temperatures for HIU are displayed
- Valve position for HIU are displayed
1.1.20 03/22/2022
- Bugfix related to QR codes
- Bugfixes for LogoMatic and LogoEco products
1.1.16 12/10/2021
- Changes to the settings menu for LogoMatic en LogoEco products
1.1.15 12/03/2021
- Additional settings that can be configured for LogoEco products
1.1.12 11/28/2021
- Added option to set the IP address for Flamcomat products
- Added support for LogoEco products
- Added the option to perform firmware updates on Secos products
- Added support for additional languages
1.1.10 11/02/2021
- Bugfixes to previous functionality.
- New translations.
- New app icon.
1.0.3 11/21/2020
Added the Simplex Secos as devices that can connect to the application.
1.0.2 10/02/2020
March 2026
This release focuses on smoother installation, faster commissioning, and clearer operational control—making it easier than ever to work with your Flamco products.
• Smarter Alerts: Detailed error and warning descriptions are now shown for quicker troubleshooting.
• Clearer Alerts Overview: Active and historical alerts are clearly separated
• Simplified Commissioning Reports: Reports can now be created and sent with autofill for faster setup documentation.
• LogoEco Enhancements: Extended firmware version number is now visible in the app.
• Vacumat Eco Upgrade: Now supports the latest product version featuring an improved water filter and enhanced alarm functionality.
more Version 1.66.2 Apr 23
Data Not Linked to You The following data may be collected but it is not linked to your identity:
