Release Highlights: Added some user-friendly features such as asset id, updated the address generation process , providing an additional layer of security for users. Improvements: - Endpoint renamed to wallet Signature. - Added confidential asset's id Fixes: - Fixed several bugs and issues that were affecting the performance and stability of the app. Known limitations: Once generated, do not offer the same offline address to multiple senders of payments Points to mention: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

The hard fork will take place at block 1 920 000. To continue using your funds please upgrade your wallets prior to reaching the height! Known limitations: Once generated, do not offer the same offline address to multiple senders of payments Points to mention: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

TL;DR Release Highlights: - The hard fork will take place at block 1820000 . To continue using your funds please upgrade your wallets prior to reaching the height! - Added some user friendly features such as “search” in the settings, node switching without losing connection and other minor changes. - We are aware that some dApps may have an unfriendly interface, so we ask for your patience as the development is on its way. Improvements: - Load of technical improvements were made to make your experience even more smoother and delithfull. - Added block height info in settings. Fixes: - We fixed some bugs with node interactions. - “Remove wallet” issue fixed. - Other minor visual bugs fixed. Known limitations: Once generated, do not offer the same offline address to multiple senders of payments Points to mention: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

TL;DR Release Highlights: Celebrated by the new splash screen, staking, NFT, faucet! Improvements: To allow aligning with exchanges of your choice - the transaction status can become confirmed after enough confirmations are received from the blockchain (0 by default, the parameter is configurable in Settings). Refined actionable node statuses, helping to maintain a stable connection Settings and password screens became better structured Added links to Beam Docs Numeric input fields got much prettier Improved textual messaging all around the app to make its usage even more intuitive Fixes: Many under-the-hood bug fixes you don’t want to know about, as Beam “just works” Known limitations: Once generated, do not offer the same offline address to multiple senders of payments Points to mention: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

L;DR Release Highlights: Confidential Assets have arrived in the Beam Mobile Wallet! Send and receive, get payment proof, see the balance and extended info: we’ve covered pretty much everything to help CAs become first-class citizens. The regular addresses were fixed to be correctly recognized by some exchanges (such as Binance) without any workarounds. For ETH-bound traders, along with BTC and USD, the wallet also shows amounts in ETH from now on. Known limitations: Once generated, do not offer the same offline address to multiple senders of payments Points to mention: “Max Privacy” was renamed to “Max Anonymity Set” When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

TL;DR Release Highlights: • The hard fork to enable Shaders will take place at block 1280000. To continue accessing your funds please upgrade your wallets prior to reaching the height!
 Improvements: • Send and Receive screens became simple to use, thanks to every community member who pushed us to rework the address-related logic • Selecting a node looks nicer now and so the blockchain sync process
 Known limitations:  • When using active laser beam channels the CLI wallet should not be offline for over 24 hours • Once generated, do not offer the same offline address to multiple senders of payments
 Points to mention: • Fees for general (Mimblewimble) transactions will increase to 100k Groth (an increase of 1000x). This increase is in order to protect against the threat of spamming attacks, whilst keeping the fee minimal for users. 
 Known limitations: • When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required. When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required.

Exchange rate issue was fixed

Beam 5.2 Mobile release notes TL;DR Release Highlights: Max Privacy transactions bring a dramatic privacy boost thanks to the brand new implementation of the power-savvy mobile node Features: Enabled Max Privacy transactions by implementing Lelantus MW protocol (link: https://github.com/BeamMW/beam/wiki/Lelantus-MW) with anonymity set of up to 64K Public offline addresses for collecting donations while your wallet is completely offline Payment proofs for Offline and Max Privacy transactions The wallet speaks 14 languages thanks to the amazing community support. Caught a translation mission `or a typo? Drop us a message and we’ll invite you to the translators’ Telegram group. Improvements: Export transactions history export to CSV file now include the info about BTC/USD exchange rate and the transaction type (regular, max privacy or offline) Fixes: Many under-the-hood bug fixes you don’t want to know about, as Beam “just works” Known limitations: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required. When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and an additional restore procedure will be required. Points to mention: Thanks to the mobile node, when running two wallets that were initiated from the same seed phrase the balance will be always in sync. HOWEVER, the transaction history will not be synchronized among them (each wallet will see the correct balance but only its own transaction history). Therefore, when the balance is changed without any send or receive from the wallet - check the activity in any other wallet. No funds will be lost in any case.

Offline transactions add the option to use offline addresses: no need to wait for the receiver to come online anymore! Features: Enabled Offline transactions through the Lelantus MW protocol implemented at the last hard fork. For Offline transactions new “offline” addresses are supported: it includes all the necessary information for 10 payments so that a receiver doesn’t need to talk to the sender to create a transaction. Once the ten payments run out, the sender wallet will automatically request more payments from the receiver using SBBS. In case the Receiver is not online and not responding, the Sender wallet will show an indication that there are no more payments left and the user will request a new address using an external channel. Improvements: The loading screen will be shown in fewer cases, so you’ll see your Beams faster Fixes: Many under-the-hood bug fixes you don’t want to know about, as Beam “just works” Known limitations: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. Points to mention: DO NOT SIMULTANEOUSLY RUN TWO WALLETS INITIATED FROM THE SAME SEED PHRASE. No funds will be lost in any case, please read this article for full details. If you really want to run two wallets (read: geek mode), initiated from the same seed phrase, make sure each wallet is connected to the node configured with the owner key (which is derived from the seed phrase). Even if two wallets are connected with such a node which is properly configured with the owner key, the transaction history will not be synchronized among them (each wallet will see the correct balance but only its own transaction history).

This 5.0 (Eager Electron) release paves the way for Beam towards a confidential finance ecosystem. It enables multiple features that will be introduced later, such as confidential assets, breaking linkability, and many others. IMPORTANT: After Beam blockchain will reach block 777777 the upgrade to 5.0 is mandatory to access your funds. Features: In one word: "notifications", in two: "decentralized notifications"! Your privacy stays solid, the wallet address won't be exposed when any notification is received. We deliver exchange rates to USD/BTC for every amount displayed. You’ll know when the new wallet version just came out. No worries, our wallet will never auto-update - this decision is entirely in your hands. You’ll never miss the info when a transaction is completed. Too many notifications? Switch off those that you don’t need in Settings. Easily. Improvements: In the advanced restore flow (read: geek mode), some wordings just became better. Getting BEAM from Beam faucet always present on the Settings screen. Fixes: Few smaller issues and crashes were resolved. Known limitations: When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. Points to mention: DO NOT SIMULTANEOUSLY RUN TWO WALLETS INITIATED FROM THE SAME SEED PHRASE. No funds will be lost in any case, please read this article for full details. If you really want to run two wallets (read: geek mode), initiated from the same seed phrase, make sure each wallet is connected to the node configured with the owner key (which is derived from the seed phrase). Even if two wallets are connected with such a node which is properly configured with the owner key, the transaction history will not be synchronized among them (each wallet will see the correct balance but only its own transaction history).

Fixes: Typos, explanatory messages, elements placements, colors - all to make the app more eye-pleasing and more intuitive to use.

Features: •The wallet just got much easier to use for the first-timers: the seed phrase verification is delayed till significant funds are transferred to the wallet. •The wallet just became prettier at night, enjoy the dark mode! •Export/import transaction history, tags, addresses •The current wallet data can be cleared with a few clicks Improvements: •The settings screen just became much better organized •When a password is forgotten the user is offered to restore the wallet with a seed phrase (or to create a new wallet) •Transaction details can be easily copied •When pulling the screen down transaction list is refreshed •Version number is added on login and restore screens Fixes: •Many fixes of typos, explanatory messages, elements placements, colors - all to make the app more eye-pleasing and more intuitive to use. Known limitations: •When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. Points to mention: •DO NOT SIMULTANEOUSLY RUN TWO WALLETS INITIATED FROM THE SAME SEED PHRASE. No funds will be lost in any case, please read this article for full details. •If you really want to run two wallets (read: geek mode), initiated from the same seed phrase, make sure each wallet is connected to the node configured with the owner key (which is derived from the seed phrase). •Even if two wallets are connected with such a node which is properly configured with the owner key, the transaction history will not be syncronized among them (each wallet will see the correct balance but only its own transaction history)

Features: *When a crash occurs we'll ask politely to submit the technical details, that will allow us to investigate the issue and improve app's stability *Transactions screen was introduced to present the extended transactions info Improvements: *Loading bar works smoother and is a bit more informative *Payment proof screen, settings screens, transaction details screen, tag edit screen, main menu, transaction statuses and icons updated to match the new design *Show owner key flow became more informative *Transaction actions can be triggered through haptic touch / 3d touch Fixes: *Many fixes of typos, explanatory messages, elements placements, colors - all to make the app more eye-pleasing and more intuitive to use.

IMPORTANT: Please upgrade to this version to keep using your funds after the hard fork (which will happen around August 15th, 2019) Features: •Any wallet with a seed phrase can be RESTORED on mobile (read: no need to switch to desktop to restore your funds anymore) •Addresses, UTXO, and Main app screens were redesigned to bring all the info in a better structured and more eye-pleasing way •Many tags (ex: categories) can be assigned to a single address now •Transaction details can be shared in a nice receipt-like way (read: no need to make screenshots anymore) •QR code can also be read from the photos, saved in a Library •The wallet can now "speak" in multiple languages beyond English Improvements: •"x" button is shown in some text fields to clean their value faster before typing something new •On "Receive" and "Send" screens the address is copiable with a single long tap Fixes: •Numerous usability and stability fixes, we won't consume your time here, please check the project GitHub if you want to know more :) •Crash on iPhone SE Known limitations: •When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. •When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and additional restore procedure will be required.

IMPORTANT: Please upgrade to this version to keep using your funds after the hard fork (which will happen around August 15th, 2019) Features: •Any wallet with a seed phrase can be RESTORED on mobile (read: no need to switch to desktop to restore your funds anymore) •Addresses, UTXO, and Main app screens were redesigned to bring all the info in a better structured and more eye-pleasing way •Many tags (ex: categories) can be assigned to a single address now •Transaction details can be shared in a nice receipt-like way (read: no need to make screenshots anymore) •QR code can also be read from the photos, saved in a Library •The wallet can now "speak" in multiple languages beyond English Improvements: •"x" button is shown in some text fields to clean their value faster before typing something new •On "Receive" and "Send" screens the address is copiable with a single long tap Fixes: •Numerous usability and stability fixes, we won't consume your time here, please check the project GitHub if you want to know more :) Known limitations: •When restoring your funds in automatic mode, verify that your most recent transaction (from any device) was completed at least 1 hour ago. Otherwise, your restored balance may be incorrect and additional restore procedure will be required. •When restoring your funds with your specific node, verify that the node is fully synchronized with the blockchain before starting the restore procedure. Otherwise, your restored balance may be incorrect and additional restore procedure will be required.

This release focuses on usability and aesthetics. We've implemented many of the features, justifiably requested by our customers in the April 2019 community survey. Just look through the features and improvements list and tell us what else do you need to transform our wallets into a full-fledged financial workstation :) Features: • Send/Receive screens were redesigned, so that simple actions will require even less clicks yet to allow advanced settings for a greater flexibility • When sending Beam, allow to search for address to send from (or create a new one) • When receiving Beam, allow to search for the address to receive to (or create a new one) • A category can be assigned to any address for better readability and bookkeeping. • 3D touch and swipe for quick access to various functions from within the app and as well from the launcher • Repeated transactions will save your time when sending Beam: choose it, re-edit amount and comment and send! • Securely Show Owner key: when connecting to your own node (and your own node only), deploying the wallet owner key will allow the node to monitor all UTXO sent to any wallet generated from the same seed phrase. Don't share your owner key with others as it allows to see all your funds! • Graceful undo of transaction and addresses: when unintentionally deleting an address or sending funds you'll have a chance to undo it from a snack bar with a nice countdown • "Where to buy BEAM?" button is introduced (this handy feature should be used with awareness as switching out from the wallet to the web server is a privacy risk, therefore, every customer will need to explicitly approve the feature before actual use) Improvements: • "Send all" is supported when sending Beam to avoid coindust • When deleting an address all the related transactions can be optionally deleted • Seed phrase words will be autocompleted at most after 4 characters • Addresses can be shared using the system dialog • Link to Kernel ID of every transaction in blockchain explorer (this feature also should be used with awareness as switching out from the wallet to the web server is a privacy risk, therefore, every customer will need to explicitly approve the feature before actual use) Fixes: • Long amounts are displayed correctly

QR code can include amount in Beams to receive. UTXO info will be hidden in privacy mode.

* Fingerprint to securely save your time of typing the password * Privacy mode: sending money face-to-face and don’t want to show your balance? Tap the little eye icon and make the balances “disappear” till you’ll toggle the icon again * When sending beam the total available balance will be shown * Typing your seed phrase got faster: the suggestions for its words got smarter after 4 characters at most * Wipe your transactions history with a single click * Connect to a specific node is supported now.

* Fingerprint to securely save your time of typing the password * Privacy mode: sending money face-to-face and don’t want to show your balance? Tap the little eye icon and make the balances “disappear” till you’ll toggle the icon again * When sending beam the total available balance will be shown * Typing your seed phrase got faster: the suggestions for its words got smarter after 4 characters at most * Wipe your transactions history with a single click * Connect to a specific node is supported now.