Define. Transfer. Analyse.
Users of the 4service NFC app can configure and analyse Tridonic LED drivers with NFC interface free of charge.
Application
The 4service NFC app enables quick and easy configuration and analysis of Tridonic LED drivers. This makes the work of installation engineers, maintenance officers and employees in similar fields significantly easier.
Functions
The following functions can be configured via the app, provided they are supported by the respective Tridonic product.
Set the driver parameters:
- LED output current
Set the LED output current (in mA) to adjust the brightness
- Device operating mode
Selection of the device operating mode (DALI, corridorFUNCTION, chronoSTEP, etc.).
- DALI addressing
Set the DALI short address
- corridorFUNCTION
Configuration of the corridorFUNCTION (light level, fade times, etc.).
- chronoSTEP
Configuration of the chronoSTEP profiles
EZ easy addressing decoder
An addressing tool is available to convert the Bi-colour LED binary identification signal to a DALI address of between 0 to 63.
Easily transfer driver parameter settings
With the copy function, you can quickly and easily copy a device's settings to identical devices. This saves time when replacing faulty devices and when commissioning several identical luminaires.
Transfer configurations from deviceGENERATOR
With the app, configuration files that were created with the deviceGENERATOR (ending: *.trgf) can also be transferred on LED drivers.
Driver analysis
If an LED driver is faulty, the data memory can be readout. This means an initial analysis of the causes is already possible on site.
Product information
Retrieve further information about Tridonic products, simply scan the NFC tag or the QR code on Tridonic devices.
The following prerequisites must be met before you can use the app:
- Use of an LED driver with NFC interface from Tridonic.
- NFC reader with Bluetooth connection from FEIG ELECTRONIC or Tertium Technologies. Alternatively, the internal NFC reader can also be used on different smartphones.
- Active Internet connection for first-time use and for updates.
An Internet connection is not absolutely necessary for ongoing operation. To ensure that the app works properly, however, the device-specific data must always be current, i.e. regularly updated.
- If any of the driver's functions are protected by the luminaire manufacturer (e.g. by a password), these cannot be changed even with the app.
The 4service NFC app is itself is free of charge. But costs might be incurred for the required internet connection.
They need to spend more time developing this app. If they wanna keep adding the NFC feature on the drivers they produce.
Developer Response
Thank you for your feedback. We appreciate your suggestion about spending more time on app development. Our team is committed to continuous improvement and your input is invaluable. If you have any specific issues or suggestions, please let us know at info@tridonic.com. Keep following the light!
- New Sensor Mode function implementation
- Added support for US 1-10V drivers
- Improved user experience with the internal NFC antenna
- Improvement of driver information loading on first-time installation
- Security and general performance improvements
Version 2.11.1
The developer, Tridonic, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
Usage Data
Diagnostics
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
