RELIABILITY • Fixed an issue where the app could get permanently stuck in Monitor mode with the controller showing as uninitialized after an app restart. If an unload record file on the controller is damaged, the app now recovers the readable records and repairs the file instead of hanging. • Logout and Clear Data is more dependable: the controller now resets before it can sync old data back into the app, the cart serial number is requested again, and the previous account's names no longer linger on the dashboard, on this device or on a second connected device. • Fixed truckload, bin and field totals showing a multiple of the true weight when the same unload record existed in more than one file on the controller. CONTROLLER FIRMWARE UPDATES • Fixed the app being closed partway through a firmware update on Falcon+ controllers and restarting on the dashboard. • The update screen no longer leaves on its own. Progress and the completion message now stay on screen until you exit. • Losing the controller connection during an update no longer interrupts the flash, and normal connection handling now pauses until the update finishes. DASHBOARD • Last Truck Load no longer gets stuck above the recorded truckload total after an unload. • With Group Unloads By Truckload turned off, Last Unload now shows the selected compartment's own unload instead of the whole truckload total. • A truck reported by the controller without its parent no longer displays as a compartment. • Active farm objects refresh correctly after Logout and Clear Data and after a controller reset, without restarting the app. OTHER FIXES • Fixed a crash when using Send Diagnostics on iOS. • Fixed the dashboard freezing behind a loading indicator on iOS after cancelling the "save to pending operations" prompt. • Adding a compartment before naming a new truck no longer crashes the app, and compartment names now follow the truck name as it is entered. • Fixed the Load Active Data prompt reappearing in a loop until the app was restarted. • The Cloud Sync page now detects internet connection changes without leaving the page. • Saving a truck with no name now says the name is missing instead of showing a weight capacity error. • An unchanged moisture offset is no longer rewritten to the controller on every update. NEW • Experimental: a Live Sync toggle on the Cloud Sync page automatically syncs to the cloud after each unload and clear truck, with a sync status icon visible on every page. • Signing out of the cloud now also ends your session on the server for better account security.

Fix firmware issue of duplicate CartIDs on certain controllers.

NEW FEATURES • Quick Start Guide – New onboarding guide in About section to help you navigate the dashboard and controller features • Truck-to-Bin Linking – Link trucks to specific bins for automatic bin selection. Linked trucks display a bin icon on the dashboard • Enhanced Alarm Display – Trucks with configured alarms now show an alarm icon with count on the dashboard and Truck page • Auto-Home Spout – Spout automatically returns to home position before unfolding when auto functions are enabled • Continuous Auger Alarm – Driving with an unfolded auger now triggers a continuous alarm with dismiss option (instead of one-time alert) • Home Button Animation – Connect logo now animates to indicate it can be tapped to return home (toggleable in General Settings) • Warning Icons – Critical popups now display warning icons to prevent accidental actions like resets • Improved Dashboard – Increased font sizes for Last Truck Value and PTO Speed for better readability • More Truck Details – Truck rows now show compartment count (2, 3, or 4), alarm status, and bin linking • New Thrasher Support – Added support for newer thrasher firmware versions • Cloud Reset & Logout – New Reset and Logout from Cloud option on Cloud Sync page to wipe controller data and avoid Cloud ID reuse • Storage Warning – Detailed controller logs now show a warning to prevent excessive storage usage • Crop Density Display – Crop density now only appears with volume units, hidden when using weight BUG FIXES • Fixed iOS app crashes during first-time cloud sync • Improved Cloud Sync stability for large datasets and No_ID data handling • Fixed Reprogramming page responsiveness and Falcon/Thrasher controller display accuracy • Added Reload button to manually refresh controller list on Reprogramming page • Resolved UI inconsistencies across the app and redesigned Restore and Cloud Sync pages

IOS 26 support

Auto Spout home on un-fold Archive list not loading - fixed

Fix app crashes on certain versions of ios

New Features: Cloud Syncing with Elmer's Cloud 2.0 We've integrated Elmer's Cloud 2.0 to enhance your experience with seamless data synchronization across devices. Truck Compartments Setup You can now easily configure and manage truck compartments directly within the app. Bug Fixes: Cloud Syncing Enhancements We've made various improvements to our cloud syncing process to ensure smoother and more reliable data transfer between your devices.

Hotfix v12.3.1

Hotfixes

Hotfixes

Hotfixes

Hotfix for screen orientation

Hotfixes

* [868848qyv](https://app.clickup.com/t/868848qyv) Added audio alarm when auger is unfolded and the cart is moving. * [868890byq](https://app.clickup.com/t/868890byq) Dashboard shows the assumed tandem direction. * [868890bpd](https://app.clickup.com/t/868890bpd) Bin full warning. * [868890btf](https://app.clickup.com/t/868890btf) Dashboard has a cart balance indicator showing the weight on the hitch. * [868890bwt](https://app.clickup.com/t/868890bwt) Improved workflow for App Update. * [868890bvf](https://app.clickup.com/t/868890bvf) The app updates the controller's time automatically. * [868890bx8](https://app.clickup.com/t/868890bx8) The app gives a confirmation if the merlin has been addressed successfully. * [868890brb](https://app.clickup.com/t/868890brb) Option to not clear previous truck when selecting a different truck.

* [868848qyv] Audio alarm when auger is unfolded and cart is moving. * [868890byq] Dashboard shows the assumed tandem direction. * [868890bpd] Bin full warning. * [868890btf] Cart balance indicator showing weight on the hitch. * [868890bwt] Improved workflow for App Update. * [868890bvf] The app updates controller's time automatically. * [868890bx8] Confirmation if merlin was addressed successfully. * [868890brb] Option to not clear previous truck when selecting a different truck.

[HM-1569] Fixed issue where farm objects that were brought over through migration to GUIDs would not sync [HM-1572] Make the complete calibration button always visible, not at bottom of scroll [HM-1566] Change Faults to have white text on coloured background

[HM-1556] Delete legacy unload file when empty [HM-1248] Duplicate farm objects being deleted now. Cloud sync Dictionary changed to a safe dictionary

[HM-1434] Fixed crash after updating from v10 to v12 [HM-1171] Fixed that sync fails after deleting non-synced Bin

Fixed the following bugs: * [HM-1171] disable auto controls dialog appears twice * [HM-1444] Auto unloads not staying enabled. * [HM-1448] Time mismatch fault shows when it shouldn't

## Version 12.0.1 (2023 release) The primary focus of this release has been addressing communication issues experienced in the previous release and the "Read-only mode" Fault. The communication library between the App and the Cart has been upgraded and we are reducing file sizes being transferred between app and cart. The Connection status bar will now always be visible and faults are clickable, giving you more info on the fault and giving you instructions on how to fix it ### New Features * [HM-1163] Page for enabling / disabling controller logging. * [HM-1118] add show password function in register and login page. * [HM-1313] Step resolution rounding now applies to all live weight values and accumulated weight values on Field, Bin, and Truck pages. Raw values are displayed on the unloads and truckloads pages. * [HM-1401] Added dynamic truck and bin unit type labels on dashboard above the truck and bin gauges. * [HM-1355] Disabled the ability to Restore, Sync, and Sync Parameters when there is no Offline Cart selected. Added a message for the user when these actions are attempted with no Offline Cart selected. * [HM-1302] The pop up messages for faults Controller Uninitialized, Auto Controls Disabled, Auger Unfolded, File System Failure, Pending Operations, and Load Cell Malfunction now have 'take me there' buttons that navigate directly to the related settings page. * [HM-1290] Restart controller button on Read Only mode details. * [HM-1281] Removed accumulated totals from FarmInfo.bin. Unloads now update from parameter so that they show up when in read-only mode. * [HM-1271] Change MerlinSettingsParameterContainer to low priority * [HM-1287] Execute Select and Clear Pending operations even when in Read Only mode * [HM-1275] Split unloads into multiple .bin files * [HM-1223] Unified last truckload setting for the dashboard with the group unloads by truckload setting for the unloads page * [HM-1197] Dashboard now has a truck gauge that look like the bin gauge. You can now longpress on the bin and truck gauges to set their unit types individually from the dashboard * [HM-1029] Added PTO calibration page with PTO Shaft Pulses per Revolution setting. Added Wheel Calibration page with Wheel Speed Pulses per Revolution setting and Wheel Radius setting. * [HM-1224] Override the unit type setting for bins and trucks individually. ### Bugs * [HM-918] remove the unload rate from the diagnostics page and other relative place. * [HM-1161] Change the way CRC works to reduce load on file system. * [HM-1347] can't edit the object which is not actually exist. * [HM-1348] Ssid label on dashboard updates as soon as app connects to controller. * [HM-1248] Fix duplicate id errors when cloud sync. * [HM-1235] Fixed CRC for binary files. * [HM-1296] Edits to farm objects do not take effect on the UI until after the operation is executed successfully. * [HM-1352] Fixes invalid restore points. * [HM-1351] Initialize controller function now properly updates active farm objects on controller.

Default language - en-CA Bug HM-938 Weight log period default is not set on update HM-937 Reverse Loadcell update on startup HM-932 Reperformed Guid Migration HM-929 App can't initialize controller Sub-task HM-945 PipeAg CAN Message

Haulmaster Cloud Reverse individual load cells Improve unload detection delay Digital display shows clearable tare Metric density Slave pending operations warning Individual sensor calibration Decimal point for moisture Sort farm objects by date modified Add decimal places for metric tonnes Program Merlins from app Bin percentage and color fill. Last unload becomes Truckload Manual entry of calibration factor Unload list reflects "clear truck" button Change filtering on display Bug fixes

New Features * [HM-616] Update android api version * [HM-614] Add decimals to T * [HM-613] Steering controls add LOCKED – MANUAL - AUTO to dashboard * [HM-612] Ability to change from the current kg/ac to kg/ha * [HM-173] Clearable tare available on the digital display. * [HM-452] Exponential Moving Average filtering for displayed weight * [HM-453] Unload list reflect truckloads. * [HM-590] Add accumulated cart weight and bushels to machine status. * [HM-591] Customizable weight logging frequency. * [HM-594] Remove debug targets USB and Wifi. * [HM-524] User editable Weight Change Threshold, Send Diagnostics description, enter serial number and All download. Bug Fixes * [HM-463] Stop auger gate spamming debug logs.

* [HM-449] Increase Merlin RX timeout and timeout logging. Disable constant device poll in app. * [HM-480] Paginate Weight Calibration and Unloads pages. * [HM-481] Import from John Deere doesn't show any options. * [HM-483] Eeprom Corruption on Reprogram. * [HM-486] PFW Update.

* [HM-40] Reduce Auger Fold Movement Timeout * [HM-288] Digital Display Thrasher Firmware Update * [HM-289] Reprogram Thrasher when device is unknown * [HM-291] Change Default Settings * [HM-294] Permit Reentry on Verify Connection * [HM-356] Remove Firing Disconnect when Disconnected