- Pinch-to-zoom on the Time Series and Frequency plots now stays exactly where you zoom, and the status bars hide while zoomed. Double-tap zoom has been removed; use pinch to zoom in and out. - The Frequency screen now shows the correct Fmax for CTC WS200 and WS300 sensors, and in rpm units. - Signals that exceed the plot scale, including a large DC component on the Frequency plot, are now cut off at the edge of the plot. - More reliable peak snapping for the Frequency cursor, and a single Time Series cursor line. - Improved detection of Digiducer and Digital ICP USB sensors. - The "Acquiring" indicator now clears when you cancel and appears immediately with Bluetooth sensors. - The Apple Watch app has been rebuilt for the latest watchOS. - Other bug fixes and updates for the latest iOS.

Version 5.01 improves the accuracy and reliability of measurements taken with CTC WS200 and WS300 Bluetooth sensors. PLEASE NOTE - REPORTED VALUES HAVE CHANGED - Measurements now use the sample rate each sensor reports for itself rather than its nominal rate. Reported frequencies may differ from earlier releases, typically by 2% to 4% depending on the individual sensor. The new values are the correct ones. - The maximum frequency (Fmax) shown in the PDF report for these sensors has been corrected. It was previously too high. If you compare measurements taken before and after this update, a small shift in frequency is expected and is not a fault. BLUETOOTH RELIABILITY - A new, more robust Bluetooth connection handler that reconnects more reliably and gives clearer device status when you use several sensors across different locations - Vibration Pro now checks that every packet of measurement data sent by a sensor actually arrived, and warns you if any are missing rather than showing an incomplete measurement as though it were complete - Faults reported by a sensor are now shown to you together with the remedy, and a measurement that stops part way through is ended with an explanation instead of waiting indefinitely - A Bluetooth measurement can no longer be cancelled once the sensor has started taking data, because interrupting one corrupts the measurement. With Auto Repeat on, Cancel still stops the sequence after the current measurement finishes. ALSO IN THIS RELEASE - Fixed a scripting problem where special characters in a script could prevent the script file from being saved in the output directory - A new Troubleshooting section in the built-in Help - Apple Watch reliability improvements - Bug fixes and stability improvements

Version 5.00 is our biggest update ever — a complete visual redesign of Vibration Pro. - All-new, modern interface — clean, uncluttered screens for every channel and setting - Color-coded channels throughout, so it's always clear which trace is which - Drag-cursor readout — touch and drag on any plot to read exact values, with magnetic snap to peaks, in portrait or landscape - Brand-new PDF report — crisp, professional, and identical on iPhone and iPad, with time series and frequency plots, acquisition and sensor details, and a full peaks table - Redesigned peaks list, data source, and Machine Menu screens - Refreshed app icon and launch experience Under the hood, everything you rely on is still here: external Digiducer and Modal Shop sensors, CTC WS200/WS300 wireless accelerometers, full FFT analysis, scripting, and the Apple Watch companion app. As always, use the email links in the app to send feedback or report an issue — thank you for using Vibration Pro.

• Added command Set_Master_Directory_To_CY so that the user can put all files for a calendar year in a folder for that year. • Appended the date and time to directories create using Create_Directory_From_Jobsite_Machine_ID.

• Fixed a bug where rms values were not display propelry in the Peaks window after integration • Modified the frequency rms computation to exclude more data near 0 frequency since this was biasing the results, particularly after integration of the frequency data

• Fixed a bug where Peak Hold and Running Averages did not work in all input modes. • Added driver for Sabrent input/output dongle • Added scripting command for Sabrent Dongle

• Support for CTC WS300 three axis bluetooth accelerometer. • Added scripting commands for CTC WS300 • Bug Fixes • Usability improvements

• Added ability to select maximum g-force for WS200 sensor • Added switch to allow Vibration Pro NOT to disconnect from Bluetooth devices when in background • New Script Command: Set_Disconnect_Bluetooth_When_In_Background_ON:ON/OFF • New Script Command: Set_WS200_Max_G_Force:8/16/32/64 • New Script Command: Add_Version_To_Text_File

• Fixed a bug which potentially caused the Digiducer family of devices to be unavailable when running scripts.

• Improved sensing of bluetooth devices when their status changes

• Added support for CTC WS200 Bluetooth wireless single axis accelerometer • Added scripting commands for CTC WS200 • Updated Apple Watch interface to support CTC WS200 in Apple Watch companion app • Fixed bugs in Apple Watch companion app interface • Added annual scripting subscription option • Changed Peak Snap Tolerance

Fixed a bug where sometimes script files would not load and app would crash.

• Improved anti aliasing filter when using microphone and external sensors for F-max below 4 kHz. Provides better rejection of aliased frequencies above F-max. • Added new script command allowing the script to hide the scripting playback window permitting the user to see the Time Series data screen.

• Fixed bug where Peaks data was no populated on iPhone when running scripts • Miscellaneous bug fixes

• Added job site name and machine ID to plots when available • Fixed formatting error when script is saved to job directory. When script was read into the buffer nothing was displayed and script would not run.

• Fixed a bug where the peak locations and amplitudes did not display in saved data from a script when run on iPhone. • Fixed a bug where the time series screen print from a script did not fill the image - it was the same size as the phone screen and left justified.

• Fixed bug where machine menu scripts would not always load.

• Added the option for the user to create a Machine Menu making the selection of test scripts a simple click from a visual menu • Updated the Excel Script Builder file to include a template for building Machine Menus • Disabled close button in script window while script is executing • When script window is re-opened the previous script will be reloaded if it is still available • Added the script commands Select_Default_Directory_For_Loading and Load_Data_From_File • Adding an ! at the start of a script command will turn it into a comment. This is useful for temporarily disabling a command • Updated some icons and fixed some bugs

• Setting the Alarm Limit to zero will disable it. • Fixed bug where script would not scroll during execution in some cases.

• Updated the Peak Search Limit and the Alarm Limit text edit boxes to clear upon the start of editing per customer request • Updated the peak display to only show the data from the traces which are active on the frequency display • Added Hanning and Flattop windows for frequency processing • Enhanced script command Set_Frequency_Display_Windowing to handle Hanning and Flattop windows • Added support for the new 333D04 USB accelerometer from Digiducer

• Improved layout of peaks display on iPad and iPhone • Improved some UI layout issues • Frequency cursor "Snap to peak" now respects Channel ON/OFF switches in Frequency Display Settings • Channel ON/OFF switches in Frequency Display Settings no work for linear-linear frequency plots • Added frequency alarms. When values in the frequency plots exceed the preset limit they turn bright yellow. • Added two new scripting commands: Set_Frequency_Alarm_Limit and Clear_Frequency_Alarm_Limit. • Added the Frequency Alarm Limit value to Save and Load Settings. • Fixed bug where Fmax and horizontal scale labels would overlap each other when in X-Linear, Y-Log mode in frequency plot.

• Added the following new command to the scripting language: Load_Defaults_From_File_With_Dialog Set_Peak_Search_Lower_Limit • Added the rms display computation of the frequency data to the iPhone. • Improved the peaks display window on the iPhone so that scrolling will work properly • Users can now limit the low frequency limit for the frequency peak function using "Peak Search Limit" in the Frequency Display Settings screen.

• Updated for iOS 15 • Added the following new commands to the scripting language: Set_Auto_Repeat_ON Set_Auto_Save_ON Set_Sample_Delay Disable_Triggering Set_Auto_Repeat_Delay Set_485B39_Ch1_Calibration_Value Set_485B39_Ch2_Calibration_Value • Added ability to save and load settings files

• Fixed bug which caused the app to crash when saving data using the save icon

• Added Mils/Degrees as a selectable unit for frequency plots. This was requested by the HVAC industry in the US. • Added Mils/Degrees as a unit for the Set_Units scripting command . • Added a Scripts subfolder to the app directory as a place where users can store scripts. • Updated the Vibration Pro Script Builder.xlsm file to include the new Mils/Degrees unit selector command.