SoundPad Pro Max
Easy to use sound player
$15.99 · Designed for iPad. Not verified for macOS.
SoundPad Pro Max is a simple easy-to-use audio player with a variety of playback modes.
[NEW] Multi-trigger mode now allows multiple playbacks on the same pad
SoundPad Pro Max is a sound player application that allows you to assign up to 150 sound sources to 10 pads and easily play sound source data in iCloudDrive or Dropbox with simple operations.
It is a higher version of SoundPad Pro with various playback functions such as fade-in, fade-out, cross-fade, one-shot playback, multi-trigger, loop playback, sequential playback and simultaneous playback for each pad.
Also equipped with the "WirelessSpeaker Connection KeepAlive" function that prevents "sound cutout" when playing wireless speakers!
Each of the 10 pads can be played individually, so it is possible to play sound effects while playing background music or loop sound sources*1.
About loop playback
For gapless loop playback, please use wav format sound sources, not compressed sound sources (e.g. mp).
Since the music in the device is used, you can use free sound sources available on the Internet by importing them into the library.
You can also download sound sources from iCloud Drive or Dropbox and assign them. A Wi-Fi environment is recommended because a high-speed network connection is required for downloading. If you are using a mobile connection, please be sure to subscribe to a subscription before using the service.
Also, when downloading a large number of uncompressed audio files, please be careful of the available space on your device.
When using the service at events, we recommend that you turn off Wi-Fi or set the device to Airplane mode to prevent unexpected ring tones.
Please note that music downloaded from AppleMusic, etc. may not be available due to copyright protection DRM.
Various functions operate in various ways depending on the combination of each setting.
Even when multiple functions are enabled at the same time, all functions may not operate at the same time due to exclusion control or function conflicts.
Recommended devices
iPad Pro (4th generation) or later
iPad Air (4th generation) or later
iPad (8th generation) or later
more # Update information: 1.6.2
- Add Double-tap to Play (Accidental Trigger Protection).
When enabled, playback starts with a double tap.
Enable this feature: "Home > Assign > Settings > Double-Tap to Play" and turn on.
---
# Update information: 1.6.1
- Fixed a crash on iOS 12.x and earlier.
- Update screen image.
*Multi-trigger mode is a function intended for short sound sources such as sound effects. Please note that allocating many long sound sources will consume a large amount of memory.
---
# Update information: 1.6.0
- Added new feature: “Multi-Trigger”
Enabling “Multi-Trigger” for any button in “Adjust Mode / Live Adjust Mode” allows multiple playbacks by tapping the button repeatedly.
“x1” supports manual rapid-fire, while “x2 to x16” supports auto-rapid-fire. Please be mindful of volume levels when playing multiple sound sources.
On the same pad, you can play BGM using a button in Normal Mode and play sound effects using a button in Multi-Trigger Mode.
- Bug fix
---
# Update information: 1.5.7
- Compatible with iPadOS 18.7
---
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
1.6.2 Mar 15
# Update information: 1.6.1
- Fixed a crash on iOS 12.x and earlier.
- Update screen image.
*Multi-trigger mode is a function intended for short sound sources such as sound effects. Please note that allocating many long sound sources will consume a large amount of memory.
---
# Update information: 1.6.0
- Added new feature: “Multi-Trigger”
Enabling “Multi-Trigger” for any button in “Adjust Mode / Live Adjust Mode” allows multiple playbacks by tapping the button repeatedly.
“x1” supports manual rapid-fire, while “x2 to x16” supports auto-rapid-fire. Please be mindful of volume levels when playing multiple sound sources.
On the same pad, you can play BGM using a button in Normal Mode and play sound effects using a button in Multi-Trigger Mode.
- Bug fix
---
# Update information: 1.5.7
- Compatible with iPadOS 18.7
---
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
1.6.1 Mar 3
# Update information: 1.6.0
- Added new feature: “Multi-Trigger”
Enabling “Multi-Trigger” for any button in “Adjust Mode / Live Adjust Mode” allows multiple playbacks by tapping the button repeatedly.
“x1” supports manual rapid-fire, while “x2 to x16” supports auto-rapid-fire. Please be mindful of volume levels when playing multiple sound sources.
On the same pad, you can play BGM using a button in Normal Mode and play sound effects using a button in Multi-Trigger Mode.
- Bug fix
---
# Update information: 1.5.7
- Compatible with iPadOS 18.7
---
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
Note:
When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.6.0 Feb 19
# Update information: 1.5.7
- Compatible with iPadOS 18.7
---
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.7 12/14/2025
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.6 05/19/2025
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.5 02/11/2025
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.4 12/08/2024
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.3 08/25/2024
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.2 04/21/2024
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.1 04/07/2024
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.5.0 02/05/2024
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.4.8 11/14/2023
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.4.7 05/21/2023
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.4.6 04/30/2023
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.4.5 07/23/2022
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
---------
# Update information: 1.4.0
- Wireless Speaker Connection KeepAlive function added to the settings screen.
This function is a countermeasure to the problem that the head of the played sound source may be cut off in some models when using Bluetooth speakers or Wi-Fi speakers.
Enable KeepAlive as needed to maintain the connection to the internal wireless speaker.
*Please note: When KeepAlive is enabled, the connection to the speakers is maintained while the application is running (including in the background), so if you want to disconnect the internal connection from SoundPadProMax to the speakers, you must explicitly exit the application .
---------
# Update Information: 1.3.2
- iOS15 is now supported.
Improved internal performance when playing multiple sound sources.
- Bug fixes for sound data assignment. (Please refer to the following note.)
Note:
In order to solve a bug in sound source data assignment, modifications have been made to the data storage directory structure. Although we have performed automatic migration as much as possible for sound sources already assigned in the previous version, some sound sources in iCloud and Dropbox may need to be reassigned. When applying the update, please make sure to do so when you have time to check the assigned sound sources.
1.4.4 07/21/2022
# Update Information.
- English localization added
1.4.3 07/20/2022
# Update information: 1.6.2
- Add Double-tap to Play (Accidental Trigger Protection).
When enabled, playback starts with a double tap.
Enable this feature: "Home > Assign > Settings > Double-Tap to Play" and turn on.
---
# Update information: 1.6.1
- Fixed a crash on iOS 12.x and earlier.
- Update screen image.
*Multi-trigger mode is a function intended for short sound sources such as sound effects. Please note that allocating many long sound sources will consume a large amount of memory.
---
# Update information: 1.6.0
- Added new feature: “Multi-Trigger”
Enabling “Multi-Trigger” for any button in “Adjust Mode / Live Adjust Mode” allows multiple playbacks by tapping the button repeatedly.
“x1” supports manual rapid-fire, while “x2 to x16” supports auto-rapid-fire. Please be mindful of volume levels when playing multiple sound sources.
On the same pad, you can play BGM using a button in Normal Mode and play sound effects using a button in Multi-Trigger Mode.
- Bug fix
---
# Update information: 1.5.7
- Compatible with iPadOS 18.7
---
# Update information: 1.5.6
- Compatible with iPadOS 18.5
---
# Update information: 1.5.5
- Compatible with iPadOS 18.3.1
- Fixed an issue where the Japanese Romaji keyboard was unavailable on iOS 18.3.
---
# Update information: 1.5.4
- Compatible with iPadOS 18.1
- Update Dropbox API
- Bug fixes.
---
# Update information: 1.5.3
- Compatible with iPadOS 17.5
- Bug fixes.
---
# Update information: 1.5.2
- Fixed progress display when assigning from Dropbox.
- Performance improvement fixes.
- Updated screen image.
---
# Update information: 1.5.1
- Bug fix for sound source name change function.
---
# Update information: 1.5.0
- Updated function display.
- Bug fixes.
- Added sequential play function.
The audio set to the pads will be automatically played in order.
You can use it by enabling "Sequential Play" on the settings screen.
*Notes: During sequential play, the playback will be endless, so the blackout lock will be activated to protect the screen after 5 minutes. Depending on the usage environment, the screen may not be locked to black. Please note that using the screen for a long time without using the screen protection function may cause screen burn. Please also check the disclaimer.
---
# Update information: 1.4.8
- Compatible with iPadOS 17
- Bug Fix.
----
# Update information: 1.4.7
- Fixed an alert bug in Music Library.
- Fixed a screen display bug of Dropbox.
----
# Update information: 1.4.6
- Compatible with iPadOS 16.4.1
- You can now operate the assignment screen while the sound source is playing.
- Icon change
- Minor display corrections
----
# Update information: 1.4.5
- Change screenshot.
----
# Update information: 1.4.4
- Change primary language to English
----
# Update information: 1.4.3
- English Localization added
----
# Update information: 1.4.2
- Fixed a display bug.
----
# Update information: 1.4.1
- Fixed a bug in LiveAdjust.
- Improved accuracy of LiveAdjust tempo setting
The accuracy of tempo setting has been improved.
- Improved accuracy of StartPosition setting in LiveAdjust
The accuracy of StartPosition setting has been improved. To improve accuracy, the position that can be set is limited to the range of 0 to 60 seconds from the beginning.
- Additional LiveAdjust setting items
The number of items that can be changed in LiveAdjust has been increased.
Please note that the adjustable functions and values of LiveAdjust will change depending on the status of each pad (Pad1-Pad10, not the buttons).
more Version 1.6.2 Mar 15
Data Not Linked to You The following data may be collected but it is not linked to your identity:
Contact Info User Content Identifiers 
