In the “Small Objects” view, a convenient configuration wizard is now available! It guides you step by step through the setup process and helps you configure your lighting exactly the way you want. By answering just a few questions, you can define the logic for how the light should turn on and off.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

The app update introduces a new DIY interface – intuitive, user-friendly, and ideal for smaller setups. Smart lighting is now fit for everyday use! The familiar interface is still available – find more info in the app.

- Optimizations / New: - New Products: - Outdoor sensor series: MD IR N130, MD IR N270, MD IR N360 – COM1 & uDIM - RS PRO 5100 HFD - Firmware Updates: Products already running the latest firmware version are now also displayed in the update list with an appropriate note. - Network Editing: When starting to edit a network, the view of that network is opened automatically. - More Robust Provisioning: Improved stability when provisioning multiple devices simultaneously. - Bugfixes: - Timing Issues: Resolved errors related to resetting devices to factory settings. - Message Queue: Fixed an issue where unnecessary messages were sent when removing products from groups. - Progress Display: In rare cases, the progress bar would remain at 100% despite a successful firmware update. This bug has been fixed.

Due to a bug, products were lost in rare cases after the editing of a network was finished. This bug has now been fixed.

Optimized firmware update

- In rare cases, a synchronization error with the cloud occurred when a product was first added as a single product and later grouped. The network was then displayed with the "red cloud" in the app and could no longer synchronize with the cloud. - Due to a bug, some networks created with other versions of the Steinel Connect App could not be imported. This issue has now been resolved. - In rare cases, the app crashed when a new network was created. This issue has now been resolved.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Optimizations / New Features: ◦ New Feature: Configuration of empty groups ▪ Empty groups can now be configured in advance. This allows the project to be set up with all groups and their respective settings beforehand. Later, individual products can be added to the respective groups. ◦ New Feature: Mass modification ▪ By long pressing and holding, multiple groups within a network can now be selected and edited simultaneously. The following parameters can be adjusted: • Motion Sensor (Sensitivity) • Brightness Value • Main Light Dimming Level & Run-on Time • Base Light Dimming Level & Run-on Time ◦ New Feature: Default templates ▪ In the network settings, the default profiles "Fully-Automatic", "Semi-Automatic", "Nightmatic", and "Switch Mode" can now be adjusted for the entire network. Every product and group added to the network after the adjustment of the default templates will now be set up with the new values. ◦ New Feature: Network sensor ▪ Light sensors of individual products can now be shared across the entire network and used across groups. ◦ New Feature: Move networks ▪ Networks can now be moved from one project to another. The user must be an "Administrator" in both projects. ◦ New Feature: Profile call via pushbutton ▪ When assigning button functions, profiles can now also be saved. ◦ New Feature: Save dimming value fixed/dynamic ▪ This feature determines whether a manually set dimming value via button should subsequently be permanently saved as the new setpoint or whether the product should revert to the old setpoint when switched on. ◦ Optimization: Networks can now be saved locally at any time, even if an upload to the cloud is currently not possible.

Bugfixes: - Due to a bug, times were not saved in the Nightmatic profile (e.g. for night saving mode). This bug has now been fixed. - The "Sensor-Nightmatic" operating mode sometimes did not work as intended. Bugs should no longer occur in this context. - General layout optimizations in the tile overview.

The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.

The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.

The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.

The instructions and live tutorial for adding the new STEINEL wireless pushbuttons have been adjusted to explain the process more clearly and simply.

Bugfixes: - Das manuelle Übersteuern (Dauerhaft an bis… / dauerhaft aus bis…) kann nun wie vorgesehen nur bis zum nächsten Zeitplan-Eintrag gesetzt werden. - Durch einen Fehler wurde der gemessene Lux Wert beim Teach nicht korrekt als neue Schwelle gesetzt. Dieser Fehler wurde nun behoben. - Durch einen Fehler wurde manchmal das Standardprofil nicht korrekt gesetzt, wenn ein Einzelprodukt hinzugefügt wurde, oder wenn eine Unteransicht geöffnet war. Dieser Fehler wurde nun behoben. - Durch einen Fehler wurde das Stift-Symbol zum Ändern des Namens beim Produkt hinzufügen nicht angezeigt. Dieser Fehler wurde nun behoben. - Es wurde eine eindeutige Fehlermeldung für einen fehlgeschlagenen Firmware-Download hinzugefügt. Bugfixes: - The manual override (Permanently on until... / Permanently off until...) can now be set as intended only until the next schedule entry. - Due to a bug, the measured lux value was not correctly set as the new threshold when teaching. This error has now been fixed. - Due to a bug, the default profile was sometimes not set correctly when a single product was added or when a subview was open. This error has now been fixed. - Due to a bug, the pencil-icon for changing the name when adding a product was not displayed. This bug has now been fixed. - Added a unique error message for a failed firmware download.

Deutsch: Bugfixes: - Das manuelle Übersteuern (Dauerhaft an bis… / dauerhaft aus bis…) kann nun wie vorgesehen nur bis zum nächsten Zeitplan-Eintrag gesetzt werden. - Durch einen Fehler wurde der gemessene Lux Wert beim Teach nicht korrekt als neue Schwelle gesetzt. Dieser Fehler wurde nun behoben. - Durch einen Fehler wurde manchmal das Standardprofil nicht korrekt gesetzt, wenn ein Einzelprodukt hinzugefügt wurde, oder wenn eine Unteransicht geöffnet war. Dieser Fehler wurde nun behoben. - Durch einen Fehler wurde das Stift-Symbol zum Ändern des Namens beim Produkt hinzufügen nicht angezeigt. Dieser Fehler wurde nun behoben. - Es wurde eine eindeutige Fehlermeldung für einen fehlgeschlagenen Firmware-Download hinzugefügt. Englisch: Bugfixes: - The manual override (Permanently on until... / Permanently off until...) can now be set as intended only until the next schedule entry. - Due to a bug, the measured lux value was not correctly set as the new threshold when teaching. This error has now been fixed. - Due to a bug, the default profile was sometimes not set correctly when a single product was added or when a subview was open. This error has now been fixed. - Due to a bug, the pencil-icon for changing the name when adding a product was not displayed. This bug has now been fixed. - Added a unique error message for a failed firmware download.

• Optimizations / New: ◦ New feature: Sequencer ▪ Now profiles can be started automatically at specified times (time, weekday). In this way, complex logics such as a day/night switchover can be implemented. This function is available for all products without firmware update. ◦ New feature: Standard profile ▪ The settings to which the sensor always falls back after manual override are stored in the standard profile. This profile is also loaded after a power cycle. The standard profile is also marked accordingly in the documentation. ◦ New feature: Nightmatic ▪ "NightmatiIQ" is the first product to support the Nightmatic function. For further products this will be rolled out via firmware update. ◦ New feature: Emergency light dimming value ▪ The dimming level in DC mode can now be set manually for some products. The R series supports this function from firmware V1.4. ◦ New feature: edit all networks within one project ▪ Administrators can now edit all networks of a project at once. This makes it possible to change the network even if there is no Internet connection in that moment. ◦ Optimization: A search function has been added to the project list to find the desired project faster. • Bug fixes: ◦ Due to a bug the display turned off when the set screen lock time of the iPhone/iPad expired while the app was still transferring data from the queue. Turning off the display could cause the transfer to stop. This bug has now been fixed and the display remains on for the transfer period. ◦ Due to a bug, it was often displayed that the active profile is unknown. This should now occur significantly less often. ◦ Due to a bug, in rare cases no profile was displayed. This bug has now been fixed.