SuPAR
Mobile inspection tool with AR
Free · In‑App Purchases
SuPAR, enables instant visual inspection of the physical objects in the quality control process, by superimposing its CAD model onto the object over real-time imagery from a device camera.
With the AR visualization SuPAR provides, visual inspection in the quality processes can be carried out much more efficiently and reliably.
SuPAR automatically creates a visual comparison of CAD data (how it should be) with what the camera sees (real situation). Thus, with the augmented reality (AR) technology, it is easily ensured that the targeted and real situations can be coincided and the deviations can be detected.
The software supports the user in three main tasks:
• Visual inspection/verification of various production tools, master models, sheet metal molds and parts, plastic parts, equipment and such series, prototypes and test parts,
• Recording problematic areas in notes and reports using annotations such as texts, photographs and 3D Notes, through created digital Twins,
• Communication through the created digital twin and video conference.
With SuPAR, parts of any size can be traced using a CAD file reference and can be checked in a very short time by a "Quality Assurer" without any calipers, templates, rulers, etc.
In addition, the virtual drawing tools and control notes offer the possibility of exporting outputs, such as notes and photos, overlapping of target and real situations, with an Excel file during and after the control. There is also a communication module where you can start a video conference.
SuPAR application areas can be various as follows.
• Dimensional quality control in the input and output processes of materials
• In the approval and acceptance of components and equipment,
• In the approval of the first sample shapes and geometries,
• Providing production standardization,
• In maintenance and repair processes, etc.
Using SuPAR saves great time and resources, helps achieve higher quality and process reliability with improved cognitive perception, simplifies the whole process and builds a better cooperation between operational processes.
In a nutshell, with the use of SuPAR;
• Quality issues are detected earlier with less effort and corrected easier and faster.
• All structural and geometric features are checked and documented.
Terms of Use: https://supar.eu/eula
more - Fixed a bug that prevented Excel reports from being generated if the POI had steps.
- Fixed a bug that prevented projects opened from OneDrive from being overwritten.
- Fixed a bug that prevented inspections from being saved in projects opened from OneDrive.
- Fixed a bug that caused draft tag to appear when an inspection was saved as.
- Fixed a bug that caused the connection to drop during data transfer.
- Fixed a bug that caused the flashlight button to be misplaced for left-hand use.
2025.1.148 1d ago
- Fixed a bug that showed unnecessary expand buttons in the product tree.
- Fixed a bug that prevented the description field from being displayed.
- Fixed a bug that prevented navigation from progressing when the quick decision option was used.
- Fixed a bug that caused the date information to appear incorrectly in the draft inspection template.
- Fixed a bug that prevented the camera feed from working in object placement mode.
- Improved text input fields to make them clearer.
- Added seconds information to the inspection timestamps.
- Added the ability to transfer data to subfolders.
2025.1.144 2d ago
- Fixed a bug that prevented projects opened from cloud storage from being saved.
- Fixed a bug that prevented the POI anchor from updating correctly when the POI was resetted.
- Added draft labels for new inspection templates.
2025.1.138 Feb 4
- Fixed a bug that prevented the text input field from scrolling as you typed.
- Fixed a bug that prevented folders from being sorted by name.
- Fixed a bug that prevented editing of the password-protected PDF report.
2025.1.136 12/17/2025
- Fixed a workflow where, if user selects a spproject from SuPAR folder existing project window were prompted instead of loading project
- Fixed a bug where wehn user starts AI inspection before AI model is downloaded navigation menu were presented
- Fixed a bug where exact search was not matching correctly
- A warning window added for smartpoints without valid target
- Fixed a bug where stage selection UI was not updating with selected stage.
- Fixed a bug that caused flashlight’s on/off state to be displayed incorrectly.
- Fixed a bug that caused the stages' context menu icon to appear.
- Improved search performance when working with a large number of projects.
2025.1.134 12/01/2025
- Fixed a bug where screen rotation may cause freezing
- Fixed a bug where missing AI target could cause crash
- Fixed a bug where box cross section boundary was calculated at wrong orientation
- Fixed a bug where product tree was not scrolling to selected part
- Jittery tracking notification sensitivity improved
2025.1.131 11/17/2025
- Tracking smoothing added
- Dynamic tracking improved
- CAD to World measurement added
- Stage selection UI/UX improved
- Inspection settings added
- Camera flashlight control added
- App startup time improved
- Project loading from external source added
- Reset option added for clearing selected or filtered POI
- UI notifiers for AI conditions feedback added
- AI module for stud inspection's localization is improved
- AI settings added
- Quick POI decision behaviour added as option to settings
- Custom image editor added
- Horizontal slider added to product tree
- Measurement UI improved
- Change in axis view added to measurement UI
- Project search time and UI improved
- Distance estimation implemented for AI based object detection tasks
- Ghost model colour option added
- Password encryption for PDF and Excel reports added
- DOCX report type support added
- Notifications UI improved
- Clear cache and reset settings added as an option
- AI result reticle distance scaling fixed
- Fixed a bug causing POI to shake if flower distribution is enabled
- A bug fixed where pressing "Enter" key did not accept input at various dialog windows
- A bug fixed where AI module was inferring even if target is occluded
2025.1.126 11/13/2025
- Security measures for Unity3D CVE-2025-59489 implemented
- Fixed a bug where POI flower distribution creates jittery visualization
2024.1.125 10/14/2025
- Improved CAD wireframe mode rendering for surfaces with identical normals
- Fixed a bug where clicking "Cancel" could skip the next POI during navigation
- Added outlines to lines for improved visibility
- Fixed a bug where the AI module did not record result messages for object detection targets
- Updated AI module behavior to ignore partially occluded targets
- Input fields UI improved for better visibility
2024.1.123 08/25/2025
- Fixed a bug where snapshot edits were not being saved correctly
- Fixed a bug in the AI module that caused result mix-ups when inspection targets overlapped.
- Fixed a bug where POI requirments were ignored if a decision made via quick POI interactions
- Resolved an issue where unsaved changes were not discarded when switching to another POI
- Fixed a bug where using scaling gizmo at detection were also rotating the model
2024.1.120 06/27/2025
- AI integration improved for inference time
- AI behaviour is improved for decision timing
- Fixed a bug where reference view thumbnails were missing for some projects
- Fixed a visual bug where CAD edges were wavy, dashed or broken at distance
- Fixed a bug where inspection naming for starting a new inspection workflow was flawed
2024.1.116 04/27/2025
- Added extended memory support for large projects
- Fixed a bug where the QR code reader was not working in Scene mode
- Fixed a bug where cross-sectioning was not working with scaled objects at Free Placement Mode
- Fixed a bug where the position marker for the center of the AI-detected objects was in the wrong position
- Fixed a bug where the position marker for the center of the AI-detected objects was inconsistent with the decision
- Fixed a bug where removing a measurement at a POI blocked the ability to save
2024.1.115 03/25/2025
- Fixed a bug where report export options were not visible after app was minimized or sent to the background
- Fixed cache invalidation for report customisation entries, this was causing a failure in the reporting system
- Increased the event count of the bug report
- Error message improvements
- Fixed a bug where list slider position was incorrect
2024.1.112 01/17/2025
- Added report customization for XLSX, CSV, and PDF reports.
- Real-world photo capture from scene mode added.
- Introduced stage change UI in the object tracking placement menu.
- Added password protection for spprojects.
- Improved POI visualization for dense environments with clipping and flower-like expansion.
- Added the option to select POI type and status for reporting.
- 2D photo editor added.
- Elevation changes during free placement added.
- Imperial and metric unit display support added.
- Note steps added to navigation list.
- Added a toggle for fuzzy search and exact match in project search.
- Search results now include directories.
- Inspections without checkpoints or smart points will omit completion percentages in PDF reports.
- Smartpoint photos now include only the selected POI label.
- Noted AI version details in PDF reports.
- AI network architecture support extended.
- Added support for multi-model, multi-target AI models.
- Marked the center of AI results in object detection model photos.
- Added a notifier for AI points completion within the focus window.
- Extended support for external mouse and trackpads.
- QR/barcode reader window scaling added.
- Profiles configured in the organization panel now apply as default.
- Hungarian localization support added
- French localization support added
- Portoguese localization support added
- Fixed a bug where profile deletion in the app was failing
- Fixed a bug causing Smartpoint photos focusing wrong at a point
- Fixed a bug where large custom logos was failing pdf report creation
- Addressed a Z-fighting issue with measurement textures and CAD models in close proximity
- Fixed a bug causing cross-sectioning to ignore assigned materials
- Dropdown menu UI position fixed
- Fixed an issue where scanning some QR codes might cause the app to freeze
- Predefined text pop up UI position fixed
- Fixed a bug where POI names were hidden when camera was too close
- Fixed the issue where CAD ruler did not match its anchors after scaling object
- Projects page freezing while refresh is fixed
- Fixed a bug that caused missing notes at excel report
- Fixed a bug where some smartpoints were missing their photos
- Consecutive character search failure at predefined text fixed
- Fixed an issue where camera rotation gesture will be flipped if object rotated upside down
- Scroll slider added to report saving window
- Fixed a bug where misconfigured app settings causes problems for tracking
2024.1.109 01/03/2025
- Fixed a bug where large custom logos could freeze report generation.
- Fixed a bug where custom logos drawn at unusual aspect ratios could freeze report generation.
- Fixed a bug where password-protected files might fail to load.
2023.2.100 07/26/2024
- Shader and Material support has improved
- AR hazard warning dialog is shown only on app launch
- Fixed an error that prevents starting AI navigation when offline
- Fixed a bug where dynamic tracking was ignoring stages' edges (Edges need to extracted again with Composer 2023.2.160+)
- Fixed a bug where ghost model was not matching with stage's product tree visibility (Edges need to extracted again with Composer 2023.2.160+)
- Fixed a bug where corrupted custom logo were crashing pdf reporting
- Fixed a bug where tracking data ignored for some project, prompting "No object tracking data found" message
- Magnifier locking bug fixed
- Fixed a bug where changing stage at scene mode was keeping the object on scene even if placement mode changed
- Fixed a bug where snapshot were not visible at product tree
- Fixed a behaviour where changing solid colour was not effective if parts has multiple material
- Fixed a bug where attaching portrait mode snapshot crashing PDF export
- Fixed a bug where clicking "Reset" at context menu was making all nodes visible instead of resetting to stages' configured product tree
- Fixed a bug where Show/Hide icon at product tree was missing
- Fixed an error that prevents exporting pdf report when snapshots are attached
2023.2.99 03/15/2024
- Fixed a bug where dynamic tracking was ignoring stages' edges (Edges need to extracted again with Composer 2023.2.160+)
- Fixed a bug where ghost model was not matching with stage's product tree visibility (Edges need to extracted again with Composer 2023.2.160+)
- Shader and Material support has improved
- Fixed a bug where corrupted custom logo were crashing pdf reporting
- Fixed a bug where tracking data ignored for some project, prompting "No object tracking data found" message
- Magnifier locking bug fixed
- Fixed a bug where changing stage at scene mode was keeping the object on scene even if placement mode changed
- Fixed a bug where snapshot were not visible at product tree
- Fixed a behaviour where changing solid colour was not effective if parts has multiple material
- Fixed a bug where attaching portrait mode snapshot crashing PDF export
- Fixed a bug where clicking "Reset" at context menu was making all nodes visible instead of resetting to stages' configured product tree
- Fixed a bug where Show/Hide icon at product tree was missing
2023.2.97 03/14/2024
- Visualization error for CJK fonts at PDF reports fixed
- The issue with the illumination on the back side of the objects has been fixed
2023.2.96 01/29/2024
- Fixed a bug that tracking performs badly for some objects
- Fixed reference view thumbnail background color
- Fixed reference view pivot seems at wrong position
- Fixed some crashes
2023.2.94 01/12/2024
- Stage system
- AI integration a.k.a. Smartpoints!
- Zeiss Gap & Flush measurement data support added
- General comment for report is added
- Environmental light estimation added for visual quality
- License expiration warning added to home view
- Ghost model starts from last known position and rotation
- Context menu for product tree elements (Hide/Show all, Expand/Collapse all, Reset)
- Summary page added to PDF and Word reports
- Automatic inspection removal based on criteria
- Color legend added to photos that are taken while measurements enabled
- Distinct icon for nodes with hidden child
- POI predefined messages selection pop up
- User configurable state are saved for intrasession use (Project list sorting, grid/list mode selection, Current directory, Start new inspection after save, Magnifier window size)
- Czech language UI support added
- Memory fix for PDF reporting
- Fixed an error for loading wrong projects if duplicate named projects exist
- Project view collapsing after filtering and search fixed
- Fixed a bug at while navigating inspected POI were not selectable
- Fixed a bug where deviation labels shown as NaN when all comparisons disabled
- Fixed a visual bug where settings menu elements stay selected
- A bug where extra lines were drawn at large objects fixed
- Some UI elements placement were not following UI placement setting fixed
- Fixed cropping long text in pdf report
- Fixed cropping long text while inspection saving prompt
- Optimized displaying UI elements to decrease huge memory consumption
2023.2.93 01/10/2024
- Used memory size is reduced significantly
2023.1.90 12/12/2023
- Fixed a bug that sometimes product tree get stuck while expanding/collapsing items
- Fixed a bug that while dropping comment enabled, touching model during photo taking creates new comment and resets the checkpoint
- Increased inspection completion status text area to fit step text if there are many checkpoints (100+)
- Fixed a bug that "Start Navigation" stays visible when Not Checked POIs are filtered out
- Fixed a bug that some UI elements stay on left regardless of which UI orientation is selected
- App menu and product tree buttons
- App menu
- Product tree
- Tracking feedback view
- Fixed a bug that inspection list window still active after loading a new project
2023.1.89 10/11/2023
- Inspection Panel added for detailed checkpoint and notes usage
- Inspection grouping added (Composer 2023.1.142 and newer)
- Checkpoints and notes can be filtered at inspection panel
- Product Tree UI has updated for better UX
- Product Tree and Inspection Panel windows is resizable now
- Added a toolbar toggle under “Layers” to turn on/off solid model quickly without using product tree
- Start navigation button visible even if inspection complete fixed
- Project view refresh after deletion or adding new projects fixed
- File path language error is fixed
- QR Code search to subdirectories is fixed
- Project names with Japanese characters shown truncated fixed
- Some characters(/ // ///) at inspection name crashes pdf export fixed
- Polish UI errors fixed
2023.1.88 08/28/2023
- Added multi-language predefined texts for point-of-interest (POI) title, description and comment fields (predefined texts need to be imported via Composer 2023.1.140+)
- Fixed bugs in inspection window
- Fixed missing localizations
- Fixed a bug that "Start Navigation" button stays visible even if there is no checkpoint to inspect
2023.1.87 07/12/2023
- User navigation system - user is guided to uninspected points
- Some UI elements redesigned
- Added some missing localizations
- Rescaled some UI elements
- Fixed Spanish and Polish localizations
- Fixed tremendous memory usage on grid project view if there are lots of projects
- Fixed a bug that toolbars don't respect UI orientation
- Fixed a bug that scene view axis gizmo don't respect UI orientation
- Fixed a bug that box and sphere cross sections are not visible if solid model is hidden
2023.1.86 06/27/2023
- Fixed a bug that prevented Excel reports from being generated if the POI had steps.
- Fixed a bug that prevented projects opened from OneDrive from being overwritten.
- Fixed a bug that prevented inspections from being saved in projects opened from OneDrive.
- Fixed a bug that caused draft tag to appear when an inspection was saved as.
- Fixed a bug that caused the connection to drop during data transfer.
- Fixed a bug that caused the flashlight button to be misplaced for left-hand use.
more Version 2025.1.148 1d ago
Data Linked to You The following data may be collected and linked to your identity:
Data Not Linked to You The following data may be collected but it is not linked to your identity:
