A clearer Settings tab: your home group at the top, all devices in one list, and a new Help section. A new filter card shows when to change the filters and orders the right filter set for your unit. The ventilation card tells you why the unit is stopped, limited or boosted, and what you can do. Fault messages in plain words, one maximum fan level for zonal ventilation, and a humidifier target of 20–50 %. Zonal ventilation notices appear only on units with zonal dampers.

New heating view for thermostats with software 2.0 and later: Home and Away for the whole home, holiday mode and the weekly program. Smart Control, open-window detection and adaptive start in the thermostat settings. A "what's new" note after each thermostat update. A notice when you're offline, with automatic retry. Many fixes and improvements.

New: Airobot is now available in Finnish. New: start Boost or over-pressure from the Lock Screen, Home Screen widgets, Control Center or Siri ("Hey Siri, boost my ventilation with Airobot"). Works for units connected over Wi-Fi. New: after setting up a thermostat over Bluetooth, add it to your home in one tap. New: when the search finds no Airobot, the app says why and opens the right setting. The top speed preset is now called Max, so it is no longer confused with the timed Boost. Fixed: thermostat humidity showed a tenth of the real value. Fixed: after changing one heating zone's temperature, the other zones briefly showed 0.0. Fixed: lite ventilation units could not change the fan level. Fixed: on units made before July 2022, the heater and cooler settings could not be opened. Fixed: during Bluetooth setup, "Connection lost" could stay hidden.

Dark mode — follows your phone, or choose Light/Dark in Profile Speed presets in Manual mode: Away, Low, Normal, High, Boost Bluetooth setup rebuilt: nearest units first, Wi-Fi progress, works on Android 11 and older Redesigned duct heater/cooler and humidifier views Home settings: one screen per home Faster start-up and a new loading animation All 8 languages complete Fixed: Settings tab getting stuck; constant flow over Bluetooth

Dark mode — follows your phone, or choose Light/Dark in Profile Speed presets in Manual mode: Away, Low, Normal, High, Boost Bluetooth setup rebuilt: nearest units first, Wi-Fi progress, works on Android 11 and older Redesigned duct heater/cooler and humidifier views Home settings: one screen per home Faster start-up and a new loading animation All 8 languages complete Fixed: Settings tab getting stuck; constant flow over Bluetooth

Push notifications for home invites and ownership changes New Push switch in your profile, separate from e-mail E-mail preferences prompt is back Clearer wording when inviting someone or transferring ownership Fixed: room names on the ventilation dashboard showed device IDs

New: zonal ventilation (two zones, CO₂-driven), Zones chart in Statistics, external switch input for boost, System Test for installers Improved: settings regrouped by product and hardware-gated, frost protection + pre-heater together, non-responding accessories shown inactive, clearer recalibration instructions, seven locales up to date

Restored external heating and cooling control for older device models. Constant flow settings now appear on every device that has the sensors for it, and stay reachable when you switch modes. Refined wording and navigation throughout, plus reliability improvements

In this update you can set your home country and change it anytime. Statistics now show CO2 history for thermostat and sensor devices with correct local times, sensor only devices have a simpler view, and the filter replacement reminder is cleaner. This release also includes wording improvements and reliability fixes for sign in and adding devices.

Guided duct-type setup - Setting up your ventilation unit is clearer than ever. You can now pick your unit's duct layout during setup, with step-by-step instructions to help you get it right the first time. "Setup needed" reminders - If a device still needs a setup step to work properly, you'll now see a clear banner pointing you to what's left — no more guessing why something isn't running as expected. Improvements & fixes - Various refinements across the app, plus updated translations, for a smoother, more reliable experience.

Redesigned Bluetooth pairing — clearer Wi-Fi setup, helpful tips while scanning, better error messages, signal-strength indicator. Reboot countdown — see when your device comes back online after a reboot, no more guessing. New ventilation settings hub — pick a topic directly instead of scrolling through one long page. Statistics now hide faulty sensor readings (no more bogus 66554% humidity / 3276°C spikes) and show status bands on the chart. Compact filter alert with one-tap dismiss. Major translation pass across all 8 languages.

Better statistics view — temperature charts now show your setpoint line, and floor temperature is included where relevant. Refreshed look — bigger, easier-to-read text across the app; consistent value pills throughout settings; cleaner section spacing on the device info screens. Settings tidied up Fixed setpoint pickers (CO₂, humidity, VOC, PM2.5) not opening or appearing empty on some devices. Pause button moved next to the boost button

Improved Statistics view. Update to the Ventilation Settings view, making some settings easier to understand. Fixed Bluetooth mode issues. Fixed an issue where a device was not shown as offline when it should have been.

Behind-the-scenes upgrade: we've moved Airobot to new cloud infrastructure that's faster, more reliable, and more secure. This sets the stage for upcoming features. New improved statistics view and ventilation and heating devices split into 2 separate view for faster navigation

Improved QR code scanner performance. Filter reminders can now be set for any month (not only 3, 6, 9, or 12). Improved the statistics view and fixed an issue where data sometimes failed to load.

230V thermostats heating (green) or not heating (grey) color dot has been improved to show exact state of heating

Fixed an issue where thermostat setpoint changes were applied to another thermostat

Fixed an issue where heating thermostats were sometimes not displayed in the app.

More stable Bluetooth connectivity. User management added: home owners can invite or remove users. Fixed a bug where changing the setpoint on one thermostat affected another. 24V systems now support a minimum setpoint of 5°C (previously 18°C). Fan coil units can now be controlled directly from the mobile app.

Added Demo Mode, which now shows a demo home group where both the thermostat and ventilation can be controlled. New! Control your device locally via Bluetooth. To connect, go to Settings or the “Connect Wi-Fi or Configure” screen during signup. Your ventilation unit must run firmware version 539 or newer. The fan balancing view has been redesigned for a smoother experience and a clearer overview of real-time fan speeds. Devices with constant flow support now include additional options to set minimum and maximum airflow levels. Fixed various crashes and stability issues

New app icon and welcome logo updated to match our new brand Improved PM2.5 setpoint value selection Support for special characters (e.g., “ž”) in device names Fixed various crashes and stability issues

Improvements and bug fixes

Added support for new V4 and V6 models device type selection

Fixed issues that could cause the app to crash in certain situations.

Added support for Icelandic language Improved room sensor state icons – now clearly indicate when cooling or electric heating is active Fixed an issue where navigation buttons were covered by system UI elements