• Fixed an issue where wind barbs displayed incorrect speeds and gusts [Thank you to the pilots of Maryland for bringing this to our attention.] • Fixed an issue where you could not drag within EBL and VRM [Thank you to the pilots of Maryland and DanPilot for bringing this to our attention.] • Fixed an issue where the alarm on own vessel would not activate immediately [Thank you to the pilots of Maryland for bringing this to our attention.] • Fixed an issue where fender lines would appear fully opaque in navigation mode [Thank you to the pilots of Liverpool and Woodside for bringing this to our attention.] • Fixed an issue where military zones would appear too distinct [Thank you to DanPilot for bringing this to our attention.] • Fixed an issue where the route leg length was displayed in scientific notation. [Thank you to the pilots of GLPA for bringing this to our attention.]

• Fixed a crash when loading S-57 charts where a Military Practice Area is a reference point. [Thank you to Capt. Grzegorz RACKI for bringing this to our attention.] • Fixed an issue where the distance unit from the app settings was not applied to the length of the fender lines.

• The vessel shape can now be selected from the new vessel shape catalog or defined using a custom shape. • Fender lines are now defined by a single point, along with length and bearing. • Multiple alignment points can now be added to fender lines. • The displayed units for wind, current, and temperature can now be changed. • Apple Watch: New app with improved user interface and extended timeout duration. • Improved replayer performance. • Improved overall app performance and battery life. • Improved chart import speed. • Added a new Man Overboard (MOB) icon and past track for MOB events. • Added support for importing files using “Open With”. • Improved clock visibility. • Improved visualization of restricted areas. • P3 devices and other NPUs now use the PACP to set static vessel properties. • Fixed various issues with meeting points. • Fixed an issue where XYZ soundings above sea level were displayed as below sea level. • Fixed an issue with missing prediction shapes. [Thank you to the pilots of Harwich Haven for bringing this to our attention.] • Other improvements and bug fixes.

• Fixed issue with charts being updated even though the user had chosen to postpone. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Fixed issue with vessel prediction shapes being displayed with incorrect offsets. [Thank you to the pilots of Brazos for bringing this to our attention.] • Fixed issue with extremely slow startup for some users. [Thank you to the pilots of DanPilot for bringing this to our attention.] Version 26.0.2: • Fixed issue with vessels sometimes being displayed with incorrect offsets. [Thank you to the pilots of Maryland for bringing this to our attention.] Version 26.0.1: • Fixed issue with wind symbol showing double speed. [Thank you to the pilots of Southampton for bringing this to our attention.] • Fixed issue with missing decimal point on keyboard for Manual Contour Depth. [Thank you to the pilots of DanPilot for bringing this to our attention.] Version 26.0: • Added support for chart import from USB stick. • Added option to change object text size. • Added support for currents at multiple depths. • Added AToN names to AIS tide stations. • Added support for CAD Overlays from DXF files. • Only show vessels from the cloud within the set radius. • Fixed an issue with live data sometimes being shown during replays. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Other improvements and bug fixes.

• Fixed issue with vessels sometimes being displayed with incorrect offsets. [Thank you to the pilots of Maryland for bringing this to our attention.] Version 26.0.1 • Fixed issue with wind symbol showing double speed. [Thank you to the pilots of Southampton for bringing this to our attention.] • Fixed issue with missing decimal point on keyboard for Manual Contour Depth. [Thank you to the pilots of DanPilot for bringing this to our attention.] Version 26.0 • Added support for chart import from USB stick. • Added option to change object text size. • Added support for currents at multiple depths. • Added AToN names to AIS tide stations. • Added support for CAD Overlays from DXF files. • Only show vessels from the cloud within the set radius. • Fixed an issue with live data sometimes being shown during replays. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Other improvements and bug fixes.

• Fixed issue with wind symbol showing double speed. [Thank you to the pilots of Southampton for bringing this to our attention.] • Fixed issue with missing decimal point on keyboard for Manual Contour Depth. [Thank you to the pilots of DanPilot for bringing this to our attention.] Version 26.0 • Added support for chart import from USB stick. • Added option to change object text size. • Added support for currents at multiple depths. • Added AToN names to AIS tide stations. • Added support for CAD Overlays from DXF files. • Only show vessels from the cloud within the set radius. • Fixed an issue with live data sometimes being shown during replays. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Other improvements and bug fixes.

• Added support for chart import from USB stick. • Added option to change object text size. • Added support for currents at multiple depths. • Added AToN names to AIS tide stations. • Added support for CAD Overlays from DXF files. • Only show vessels from the cloud within the set radius. • Fixed an issue with live data sometimes being shown during replays. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Other improvements and bug fixes.

• Fixed an issue with setting the AIS offsets. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Fixed an issue with the predicted heading warning. [Thank you to Captain Theo Troost for bringing this to our attention.]

• Whale sightings can now be displayed. • The number of own vessel motion vectors can now be changed. • Support for battery care mode for battery-driven PPUs. • The iPad location can now be used as fallback. • The opacity of annotations can now be changed. • Keep prediction shapes at low speeds with significant ROT. • Clearer warning vessel outline. • AIS timestamp now shown in vessel list. • Other improvements and bug fixes.

# NOTE: This update will trigger a re-import of all charts! • Allowed a decimal point on the route leg speed limit. • Ensured shoreline constructions are shown with the correct color. [Thank you to the pilots of Maryland for bringing this to our attention.] • Other improvements and bug fixes.

• Security update for encrypted data server communication.

• Fixed an issue with the app freezing during route planning.

• Device dot color changed; Orange for PIP, Pink if pilot verified GPS position, else Blue. • Fixed vessel prediction divergence. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Added audible warning when speed limit or max XTD is exceeded.

• Fixed an issue with replay when using TCP devices. • Added the option to always have one decimal on ROT. • Other improvements and bug fixes.

# NOTE: This update will trigger a re-import of all charts! • Improved S-102 soundings and split them into SCAMIN layers. • Updated device details and antenna offsets for all CAT v5 PPU’s. • Fixed issues when changing between system setups (e.g. remove CAT EXTENDER from the pilot plug). • Warn when the heading is predicted. • Support for importing max XTD and speed from rtz route files. • Support for XYZ charts using EPSG code to specify coordinate system.

• Fixed bug with XTD calculation when using wheel-over-point or manual selection of next waypoint. [Thank you to the pilots of Chevron Australia and the pilots of Maryland for bringing this to our attention.]

• Fixed error in CPA range introduced in 24.3. [Thank you to the pilots of DanPilot for bringing this to our attention.] • Past track shapes are now drawn with equal time intervals. • Fixed issue with XTD when using wheel-over-point. [Thank you to the pilots of Medway for bringing this to our attention.] • The CPA range has been extended to 20 NM and the maximum TCPA to 4 hr. • Improved internet communication. • Added option to manually select Turning Basin. • Wi-Fi RSSI (strength) is now shown for the heading device when using the CAT EXTENDER. [Thank you to Captain Theo Troost for bringing this to our attention.] • Other improvements and bug fixes.

• Past track shapes are now drawn with equal time intervals. • Fixed issue with XTD when using wheel-over-point. [Thank you to the pilots of Medway for bringing this to our attention.] • The CPA range has been extended to 20 NM and the maximum TCPA to 4 hr. • Improved internet communication. • Added option to manually select Turning Basin. • Wi-Fi RSSI (strength) is now shown for the heading device when using the CAT EXTENDER. [Thank you to Captain Theo Troost for bringing this to our attention.] • Other improvements and bug fixes.

• Fixed issue with SafeCaptain main settings not showing up in iPad settings after update to iPadOS 18.

# NOTE: This update will trigger a re-import of all charts! • Option to use SCAMIN for ENC soundings. • Support for S-102 edition 2.2.0. • Added baseline information for CAT PRO, CAT MAX, and NPU to Device Status. • Color-coded selected device parameters to indicate quality. • Persist North up/Heading up selection. • Fixed issue with heading sometimes shown as 360.0 instead of 0.0. [Thank you to the pilots of DanPilot for bringing this to our attention.]

• Introduced new app icon. • Renamed Manifold to Alignment Point to limit confusion. • In the Passage Plan the position of the Reference Point and the Alignment Point are now shown on the vessel. • Fixed issue with disappearance of prediction vessel shapes. [Thank you to the pilots of ABP Humber for their inputs.]

# NOTE: This update will trigger a re-import of all charts! • Most relevant charts will now be imported first. • Support for DHI NCOS Online dynamic under keel clearance. • Improved colors in night mode. [Thank you to the pilots of Medway for their inputs.] • Planning mode now highlighted with yellow to make it more distinct. • Improved feedback for over-the-air firmware updates. • Other improvements and bug fixes.

• All antenna offsets are now resat to certificate value if cleared. • Other improvements and bug fixes.

• Updated the support e-mail address. • Fixed issue with integration to laser docking systems.

• Fixed issue with loading certain ENC charts. [Thank you to the pilots of Teesport for bringing this to our attention] • Fixed issue with disappearance of prediction vessel shapes. [Thank you to the pilots of ABP Humber for bringing this to our attention] • Fixed issues with scrubbing of replays. • Fixed issues when max XDT is set to 0. [Thank you to the pilots of Milford Haven and ABP Humber for bringing this to our attention]