The software update 26.1.2 for the qubeSERIES offers numerous innovations to enhance simulation quality. This version introduces two new ventilation simulators, qubeEMV+ and qubeZVent, which precisely replicate the EMV+ and Z Vent from ZOLL. Furthermore, the update provides noticeable comfort and efficiency advantages in scenario control. Users also benefit from refined feedback in resuscitation training as well as general optimizations to system stability and overall performance. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

The software update 26.1.0 for the qubeSERIES offers numerous innovations to enhance simulation quality. This version introduces two new ventilation simulators, qubeEMV+ and qubeZVent, which precisely replicate the EMV+ and Z Vent from ZOLL. Furthermore, the update provides noticeable comfort and efficiency advantages in scenario control. Users also benefit from refined feedback in resuscitation training as well as general optimizations to system stability and overall performance. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

In addition to performance and stability improvements, we are introducing the new WebSocket in qubeCONNECT. The WebSocket can connect external systems and transmit user interactions bidirectionally. In addition, the new qubeD60-DX interface enables realistic simulation of Mindray BeneHeart D60 and DX monitors. If you have any questions or suggestions for improvement, please feel free to contact us at support@skillqube.com!

The new version delivers performance improvements and an optimized user interface—for an even more realistic simulation experience. In addition, the qube3000 is introduced as a new monitor interface. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

The new version delivers performance improvements and an optimized user interface—for an even more realistic simulation experience. A special highlight is the new API interface to GAUMARD simulators. In addition, the qubeMX800 and qubeAED1000 are introduced as new monitor interfaces. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

The new version brings performance improvements and an optimized user interface - for an even more realistic simulation experience. A special highlight is the new connection center of our qubeCONTROL, which facilitates the integration and visualization of additional sensors. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

The new version brings performance improvements and an optimized user interface - for an even more realistic simulation experience. A special highlight is the new connection center of our qubeCONTROL, which facilitates the integration and visualization of additional sensors. Feel free to contact us at support@skillqube.com if you have any questions or requests for improvements!

In the new version, you can expect performance improvements and enhancements to provide an even more realistic simulation experience. Please contact our support team at support@skillqube.com if you need further assistance.

In the new version, you can expect performance improvements and enhancements to provide an even more realistic simulation experience. Please contact our support team at support@skillqube.com if you need further assistance.

In the new version, you can expect performance improvements, optimized swipe gestures, and language enhancements. Please contact our support team at support@skillqube.com if you need further assistance.

In the new version, you can expect performance improvements, optimized swipe gestures, and language enhancements. Please contact our support team at support@skillqube.com if you need further assistance.

Controller * New ECG WPW 3 * Device activation revised (larger field / more fluid / search option / confirmation prompt) * Scenarios can now be searched for (text input) * SpO2 amplitude can be set in % (100% full deflection / 0% no deflection) * Revision of the folder structure for a better overview & easier navigation * Optimization of the slider movement (smoother) * Folder of the ECG database visible again despite double connection * Additional media such as MP4 etc. are now allowed Performance improvements * Switch on MS2 via CPR button * Display optimization qubeMS2 I:E * Challenges with the stage manager and swipe gestures improved * Battery Low Alert revised with more information General improvements * Implementation of new CI * Pulse perfusion is stabilized when setting trend vital signs * Translations optimized * Adjustments to the Bluetooth connection to the qubeAirflow / visibility * Adjustments to the CPR dashboard (group selected directly) * Autoscaling of waveforms adjusted to avoid disappearance * Optimization of the keyboard overlay * UX/UI optimization when leaving the CPR screen without a connected monitor * Optimization PDF export logbookIn the connection center, the names of the devices are displayed better visually * Already connected monitors are removed from the Connection Center (or packed into another list "Systems already connected to other controllers") * FURTHER IMPROVEMENTS * Stability and display of connected sensors * Display of blood pressure values from the previous scenario qubeSerie Monitor general * Adjustment of the standard J number for defibrillation that can be set in the cloud (qubeC3/C3T, qube7 limited to 200J) * Optimized display of the J number qube15 * Amplitude setting qube15 (larger smaller) * Shock LED is displayed again * ECG lines now stand still when no ECG is connected qubeR * Loading of the Joule number adapted to the set energy * Display of alarm limits optimized qube20e * Start mode of the qube20e adjusted (open/closed valve) * Automatic triggering of cardioversion after switching to AED has been fixed qubeC1/C3 * Revision of the defibrillator unit * Jugdial in manual/AED mode has been revised qubeAssessment * Connecting the assessment no longer triggers an analysis in the AED qubeCTG * Optimization of the display when opening the CTG as a monitor * Fetal heart rate and temperature are now displayed correctly on the 10.2" iPad qubeZero * Pacer optimized (FIX/Demand) MRx * New monitor

We have fixed bugs and improved performance.

General - We have fixed bugs, improved overall performance and implemented new features based on customer requests: - Enable / disable NIBD auto-measurement for our monitors in qubeCloud. - Adjustments of translations - New language: Chinese - EtCo2 waveform now responds to ventilations with the sensor - Display of a rhythm strip in the ECG printout - Display of the writing speed on the ECG printout Controller - Standardised clinical pictures for ventilation are available again qube3 / qube3T - Usability and control in the AED qubeR - Optimisation of blood pressure measurement - Optimisation of cascade defibrillation - ECG printout is now possible Bug fixes - Stability and display of connected sensors - Display of blood pressure values from the previous scenario qubeXA - XSeries Advanced The new qubeX Advanced helps paramedics treat patients more effectively than ever before. qubeX Advanced is the first device of its kind to provide paramedic teams with the clinical information they need to improve care. The system comes with new exclusive features: Real BVM Help™ & TBI Dashboard™. Ability to pause the AED Implementation of the BVM Help Dashboard Implementation of the real BVM Help Dashboard in full functionality in combination with the qubeAirflow Integration of the TBI Dashboard with the Trend Views Integration of the TBI Dashboard with Simple and Real Ventilation Timer

We have fixed bugs, improved the performance and implemented new features by customer request: * Enable / disable NIBP Auto Measurement for our Monitors in qubeCloud * Improved ECG prints * Improved readability of parameters in qubeCTG * More realistic AED in qube3 and qube3T * Improved localizations

We have improved performance and reliability.

New functions in update version 4.0.0 More monitors - qubePMD (inch PMD) - qubePM (inch PM) - qube7PG (Schiller Physiogard) - qubeCTG - qubeT1 (Hamilton T1) Controller - Parameters adjustable independently of cloud configuration (°C/F, mg/dl / mmol/l, mmhG / kPA) - Slider in controller refined - Phase change is displayed in more detail - Physiological adjustment of extrasystoles - Adjustments logbook - Scenarios are sorted alphabetically - Alarm limits for children, newborns and adults can be set General - Extension of languages: Hebrew, Norwegian, Russian, Japanese - Interval measurement set to 5 minutes as default Performance Improvements - Calculation pulse perfusion - Adjustments to API between cloud and controller - Adjustment of the trigger threshold for the ventilator - Keyboard no longer overlays pager input field Cloud - Device specific settings for: ,qubePMD (inch PMD), qubePM (inch PM), qube7PG (Schiller Physiogard). - Pacer threshold setting in the Cloud - Defibrillation cascades for monitors - Subscreens of the qubeC3 and qubeC3T for the layout designer qube7 - Adjustments for the screen qube7b - Revision of the timer in manual mode - revision of the pacer function when exiting and re-opening the pacer - Revision of the off mode / standby - Revised display of defibrillation - Revision of the display for the qube7A - Manual defibrillator unload - Revision of menu structures and behaviors - Revision of the numerical display - Adjustment of the operating mode - 6 channel ECG print qube20e - Cancel loading of the defibrillator via the turn/push wheel qubeZero - Visual display of pressure depth incl. EtCo2 and heart rate in CPR mode qube3 - Integration of numerical fields - Optimization in the display of CPR - Volume adjustable in the metronome - Optimized display of activity in metronome - Menu structure extended qubeMS2 - Improvement of the UX by slowing down the rotation speed - integration of the medutrigger (qubeTrigger) qubeT1 - The qubeT1 simulates the Hamilton T1 from Hamilton Medical. This system is ideal for intensive care ventilation in rescue vehicles of any kind. It can also be found in hospitals, intensive care units and emergency rooms. Thus, the new simulator perfectly complements the portfolio of the qubeSeries and continues to provide excellent training with a high degree of realism. It is especially worth mentioning that in cooperation with the company Hamilton it has been possible to simulate the ASV mode and thus this mode is available for simulation training in addition to others. In version 1 the following ventilation modes are available: (S)CMV+, PCV+, SPONT, DuoPAP, ASV

Ready for iOs 16 With iOs 16 the naming of our controller changes. You will get the name directly from the cloud from now on. When you log in for the first time, you can choose it from the available ones. When you connect to the monitor for the first time, a name for the monitor will be suggested to you, which you can accept directly. - Fix Translation issues - PDF display in Mediacneter adapted - Display of CPR pressure depth adjusted - Adaptation of the parameter transfer from the cloud - Add System sound to qubeMS2 - Swipe gesture to open the media center improved - Graphic improvement - Improvements for qubeMS2 - More views for qube3 and qubeC3T

General: - It is checked if Local networks are active. If this is not the case, the users are prompted to activate them. - New synchronization for scenarios and media - Performance optimized - General bug fixing qube3 / 3T: - Metronome is disabled during AED analysis - Configuring views in the cloud qubeCloud: - Error descriptions optimized - Addition of ventilation and intensive care parameters - Integration of AppSettings in the Cloud - Pager texts can be defined in the cloud - Lab values can be defined in the cloud - PDF data can be stored and assigned to individual scenarios - Layout designer for qubeC3 and C3T Controller: - Revision of the ventilation controller: - New synchronization for scenarios and media - Pager texts and lab values are now transferred from the cloud to the controller in a standardized way - ECG's printable from controller via media center - New ECGs - Revision of the phase description for better representation AED - Optimization of voice prompts - Use of standard scenarios on the AED Assessment - SOP's stored in the cloud are displayed on the Assessment Medumat - New ventilator modes: - PCV, BiLvl ASB, CPR IPPV, Man. CPR - New views: - Pressure & flow curves and CO2 monitoring

Performance improvements

This update fixes problems with iOs 14 and the CPR Dashboard.

qubeController In order to relieve the trainers we have made further optimisations and enhancements to our qubeControll: New 12 channel ECG's more than 10 new ECG's have been added to the library to be able to display even more realistic scenarios. ECG variations: With the newest update there is now the possibility to play in extrasystoles in every ECG. Revision of the print function: With the extrasystoles, we have also fundamentally revised the printing of the ECG, so that what can be seen on the printed ECG can also be seen on the defibrillator. Improvements in the area of CPR: The instructor is now informed when the participants start or end CPR. This ensures that all the information recorded matches the time sequence. Adaptation of the control system for the ventilators: We have optimised the control system for the new ventilation modes for our ventilators so that we can make them simpler and more realistic than before. In addition to resistance and compliance, it is now also possible to set the inspiratory trigger. qubeMS2 and qubeVent More ventilation modes and more reality in training through a simulated lung, which was created together with the support of Weinmann Emergency, rounds off the system and offers new possibilities: Pressure, volume and flow are displayed: In addition to the numerical values with which the software worked, it is now also possible to display the values graphically. These are now available in Medumat Standard 2 as well as in qubeVent. New ventilation modes: In addition to the existing ventilation modes, further ventilation modes have now been added. These include BiLevel ASB and PCV in the first step. Others will follow. Adaptation of the control system: In addition to the new ventilation modes, the control system in qubeControll for the medumat has also been fundamentally revised. qubeAssessment The qubeAssessment takes on a whole new look with the new update to version 3.5. The software has been completely revised. In addition to the existing functions, it has been expanded to include the following: CO detector: With the CO detector, real incidents can now be displayed in the field. Histroy function for the pager: You can now call up and display all received messages. The checklists have been reworked for a better presentation. The media area has been adapted to the media centre of the monitor for better clarity. The assessment can now also be used as an intensive care monitor. Different values can now be displayed such as ICP, PAP, CVP and many more. You can now also allow the viewers to rate what they have seen. The information the viewers enter is written directly into the logbook. qubeC3 and qubeC3T After the last update to the latest version of the operating system of the original device, the last adjustments have been made. AUTO Analysis: You can now define whether the auto analysis should be activated or deactivated. So everyone can react to his needs and make the settings Automatic activation of the metronome: Users now also have the option of configuring the metronome in AED and manual mode so that it starts automatically or not. Adjustment of the views for the display of vital signs: To simplify the training, the views BIG 4, BiG 6, Intensive and others have been added. Pacer: The pacer is now correctly terminated after the end of a scenario. This means that the pacer will no longer start on its own when a new scenario is started. Bug fixes and optimisations: In addition to the new functions, we are constantly working on the entire system, fixing malfunctions and optimising the performance of the systems. qubeX & qubeR In cooperation with the manufacturer Zoll, the current sounds of the software were implemented so that the users can better establish an auditory connection to the system in addition to the graphical one and thus make the training even better.