1. Optimize Flow calibration. 2. Optimization of "Locking Controller" in "Product Traceability". 3. Optimization of pages display for setting watering duration of schedule or quick run.

The contractor needs to agree to declare and confirm again when locking the controller in the 'product traceability'.

1. Quick run will not start automatically on the models support multiple zones simultaneously run. 2. Display the current value during the non pulse DC decoder's quick run.

1. Product traceability displays the device model after entering the order number. 2. In the watering report, add "Other" as an option in the "Water Saving Statistics" section. 3. Indicator Light Brightness, indicating when option is off. 4. Contractors can allow each user to use NFC functionality. 5. On the "Zone List" page, quick view or show/hide disabled zones. 6. Indicate controller's inactivate shared accounts, you can resend the activation email for them. 7. Support DC decoder. 8. Any setting (exclude schedule's zone's duration) that will change actual schedule watering duration will follow a popup prompt.

Support a new sub model.

1. More detailed names of the total number of channels in the decoder. 2. Color prompt for DC decoder channel wiring. 3. When downloading device images, it supports breakpoint resume. 4. When selecting construction drawings from files, HEIC format and TIFF format are supported. 5. "Decoder type incompatible", "Decoder voltage abnormal", "Decoder not within authorized area", "DC decoder" prompts. 6. In the device homepage, there is no quick run created, nor is there any other run/current detection. The "Quick Run" button is displayed below the run button. 7. The new lawn plan supports up to 24 start times. 8. When opening the contractor equipment list, try to display the current equipment in the center as much as possible. 9. Schedule end date pop-up box add a button "Today".

1. 2-Wire model monitoring event. 2. Enlarge and view the wiring image. 3. Optimization of current detection. 4. During running, if a zone reports an error, it will be displayed. 5. Optimize decoder configuration, supporting DC decoders. 6. Optimize zone installation diagram for the 2-Wire model devices, and support compressed file. 7. When the contractor logs in, the app version is displayed on the homepage. 8. When setting the address, it can be obtained through positioning. 9. Soil moisture sensor and its monitoring events. 10. Monitoring status change of rain sensor. 11. Supports 2-Wire model with 48, 64, and 96 channels. 12. Display homepage prompt information. 13. If open the notification message with a link, open the link.

Compatible with small screen iPhone.

1. When looking up decoder quick run via NFC, it can display high current and short circuit. 2. When deleting a device, the countdown is 5 seconds.

1. Device lock, include button lock, app lock, and schedule lock. 2. Watering usage report. 3. Support 2-Wire PRO model. 4. When running, it can display short circuits and solenoid valve disconnection. 5. Display the activation status of the soil moisture sensor.

1. Device lock, include button lock, app lock, and schedule lock. 2. Watering usage report. 3. Support 2-Wire PRO model.

1. Manual run advanced buttons instructions, needs firmware 2.1.005. 2. Firmware update success in history.

Optimization of pop-up menus in some lists.

1. Optimize the application for distributor. 2. Contractor can set customer email visibility of staffs.

Support new model MINI.

Device image update.

1. Local Wi Fi records can be deleted. 2. Add a filtering type "trigger" to the history records. 3. Add backup, restore, and factory reset to historical records. 4. The watering statistics chart shows schedule water usage, manual run water usage, and quick run water usage. 5. Apply for a distributor.

Weather sandstorm, Weather haze.

Adding device fail, show more specific errors.

1. Optimize some description. 2. Fix sunrise & sunset schedule cycle issue. 3. Fix adding device issue.

1. Work sheet description supports max 1000 characters. 2. Optimize reassigning customers. 3. Contractor device map, color filters description.

Wi-Fi Password is required when adding device. This will be not necessary in the future.

1. Work sheet number description. 2. Zone plant coefficient, available water description. 3. Preset zone template name max to 200. 4. Login as contractor, after adding device, coping device is available. 5. User can update firmware in device info page.

1. When you want to input WiFi for changing WiFi, you can get phone's WiFi. 2. Fix some issues. 3. Show water delay and sensor on status in device list. 4. Coping device support Pro model. 5. Alert when WiFi ssid or WiFI password ends with a space. 6. New sensor wiring image.

1. Not limit 10 characters password. 2. Not limit 32 characters email. 3. Support ImoLaza ET Master 4th Gen. 4. Support ImoLaza ULTRA. 5. One zone can water at most 12 hours in schedule or quick run.