What’s New
 • MIDI File Playback — Added support for SF2 and SF3 SoundFont synthesis, a 16-part mixing console, and output to external MIDI ports.
 • Tracker Music Playback — Added support for various tracker music formats, including MOD, XM, S3M, and IT.
 • WavPack DSD Support — Added playback of WavPack DSD (.wv) files, DoP output, and metadata reading and writing.
 • Expanded DSP and EQ Features — Added reverb and stereo widening effects.
 • Folder Tab in the File Window — Browse Mac folders hierarchically and add, rename, or remove folders.
 • Convert and Save Selected Files — Convert selected files to MP3 or M4A. Bitrate and CBR/VBR settings are available, along with peak- and EBU R128-based loudness adjustment.
 Improvements and Fixes
 • Improved selection synchronization so that a track being edited in the metadata editor is also selected in the playlist and File window.
 • Fixed an issue that prevented some high-resolution audio files from playing when DSP or EQ was enabled.
 • Fixed an issue that delayed music playback when an external drive was connected.
 • Improved volume control when playing through external AirPlay 2 devices.
 • Fixed an issue where enabling reverb increased the volume and caused distortion. The original signal level is now preserved while providing only the headroom required for the reverb.
 • Fixed an issue where the playback position became incorrect and tracks were duplicated in the playlist after switching to another track following DoP playback.

New Features • MIDI Playback — Supports SF2/SF3 SoundFont synthesis, a 16-part mixing console, and output to external MIDI ports.
• Tracker Music Playback — Added support for MOD, XM, S3M, IT, and other tracker music formats.
• WavPack DSD Support — Supports WavPack DSD (.wv) playback, DoP output, and metadata reading and writing.
• Expanded DSP & EQ — Added reverb and stereo widening effects.
• New Folder Tab in the File Window — Browse Mac folders hierarchically, and add, rename, or delete folders. Improvements & Fixes • Tracks being edited in the metadata editor are now selected simultaneously in the playlist and file window.
• Fixed an issue where some high-resolution audio files would not play when DSP or EQ was enabled.
• Fixed an issue that could cause an endless search loop when playlist files could not be found.
• Fixed an issue where saved album artwork was not immediately reflected in the list.
• Convert & Save Selected Files — Convert selected files to MP3 or M4A, with bitrate and CBR/VBR options plus Peak or EBU R128 loudness normalization. • Fixed an issue where enabling reverb increased the volume and caused distortion. The original signal level is now preserved while providing only the headroom required for the reverb.
• Fixed an issue where, after DoP playback, playing another track could cause an incorrect playback position and duplicate tracks in the playlist.

New Features • MIDI Playback — Supports SF2/SF3 SoundFont synthesis, a 16-part mixing console, and output to external MIDI ports.
• Tracker Music Playback — Added support for MOD, XM, S3M, IT, and other tracker music formats.
• WavPack DSD Support — Supports WavPack DSD (.wv) playback, DoP output, and metadata reading and writing.
• Expanded DSP & EQ — Added reverb and stereo widening effects.
• New Folder Tab in the File Window — Browse Mac folders hierarchically, and add, rename, or delete folders. Improvements & Fixes • Tracks being edited in the metadata editor are now selected simultaneously in the playlist and file window.
• Fixed an issue where some high-resolution audio files would not play when DSP or EQ was enabled.
• Fixed an issue that could cause an endless search loop when playlist files could not be found.
• Fixed an issue where saved album artwork was not immediately reflected in the list.
• Convert & Save Selected Files — Convert selected files to MP3 or M4A, with bitrate and CBR/VBR options plus Peak or EBU R128 loudness normalization.

New Features & Improvements • Expandable CUE & SACD ISO Tracks
You can now expand CUE sheets and SACD ISO files directly in playlists and select individual tracks. Available in both the player and file list windows. • Video Subtitles
Video subtitle support has been added. Improved outlines and shadows enhance readability on bright scenes, and keyboard shortcuts let you adjust subtitle size and position. Portrait video windows are also supported. • Window Position Restoration
Open windows and their positions are now remembered when you quit and restored the next time you launch the app. • Improved HDR Video Quality
Color and brightness reproduction has been significantly improved for HDR (HLG/PQ) videos, including those recorded on iPhone. Highlight clipping has been reduced to preserve more detail and gradation in bright areas. Stability & Performance • Improved Memory Usage
Fixed several issues that could cause memory usage to continuously increase during extended use. • Improved SACD ISO Playback
Significantly improved track switching speed and fixed inaccurate seeking and controls becoming temporarily unresponsive immediately after playback starts. • AirPlay Remote Control Fixes
Fixed issues where volume, play, and pause controls did not work correctly from the remote app during AirPlay playback. • General Stability Improvements
Fixed various bugs to improve overall stability and performance. • Fixed a file access permission issue affecting some external hard drives.

New Features & Improvements • Expandable CUE & SACD ISO Tracks
You can now expand CUE sheets and SACD ISO files directly in playlists and select individual tracks. Available in both the player and file list windows. • Video Subtitles
Video subtitle support has been added. Improved outlines and shadows enhance readability on bright scenes, and keyboard shortcuts let you adjust subtitle size and position. Portrait video windows are also supported. • Window Position Restoration
Open windows and their positions are now remembered when you quit and restored the next time you launch the app. • Improved HDR Video Quality
Color and brightness reproduction has been significantly improved for HDR (HLG/PQ) videos, including those recorded on iPhone. Highlight clipping has been reduced to preserve more detail and gradation in bright areas. Stability & Performance • Improved Memory Usage
Fixed several issues that could cause memory usage to continuously increase during extended use. • Improved SACD ISO Playback
Significantly improved track switching speed and fixed inaccurate seeking and controls becoming temporarily unresponsive immediately after playback starts. • AirPlay Remote Control Fixes
Fixed issues where volume, play, and pause controls did not work correctly from the remote app during AirPlay playback. • General Stability Improvements
Fixed various bugs to improve overall stability and performance.

• SACD ISO Bug Fixes and Improved Compatibility — Fixed playlist-related issues during playback and added support for playback and audio extraction from some SACD ISO files that were previously unsupported. • DFF DST and New DST Format Playback in DoP Mode — When DoP mode is enabled, DFF DST and the newly added lossless DST DSD audio format can be played as native DSD through an external DSD DAC. • New Lossless DSD DST Format Support — The file converter now supports DST (Direct Stream Transfer), a lossless compression format for DSD. Convert DSD audio to DST files that are approximately 50% smaller than standard DSF files while preserving album artwork and metadata. Converted DST files can be played directly in Pine Player. • Enhanced DSD Conversion Engine — A newly developed in-house Sigma-Delta Modulator and Demodulator have been introduced. PCM→DSD conversion now achieves an SNR of 124.8 dB and THD of −136.9 dB, a significant improvement over the previous engine's 100.2 dB SNR and −114.1 dB THD. Idle noise has also been reduced by 27.6 dB while maintaining the same output level convention. • Lossless DSD DST Encoding Support — Added lossless DSD DST encoding, allowing you to create DSD audio files approximately 50% smaller than standard DSF files without any loss of audio quality. • New Level Meter Window with Classic VU Meters — Added a dedicated Level Meter window featuring classic analog VU meters, along with new meter types and overall improvements to the level metering system. • New Direct Stream Capture Mode — Capture audio from other music apps and enjoy it through Pine Player's high-quality audio engine. • Fixed an issue where the Settings window would not open on Intel-based Macs.

• SACD ISO Bug Fixes and Improved Compatibility — Fixed playlist-related issues during playback and added support for playback and audio extraction from some SACD ISO files that were previously unsupported. • DFF DST and New DST Format Playback in DoP Mode — When DoP mode is enabled, DFF DST and the newly added lossless DST DSD audio format can be played as native DSD through an external DSD DAC. • New Lossless DSD DST Format Support — The file converter now supports DST (Direct Stream Transfer), a lossless compression format for DSD. Convert DSD audio to DST files that are approximately 50% smaller than standard DSF files while preserving album artwork and metadata. Converted DST files can be played directly in Pine Player. • Enhanced DSD Conversion Engine — A newly developed in-house Sigma-Delta Modulator and Demodulator have been introduced. PCM→DSD conversion now achieves an SNR of 124.8 dB and THD of −136.9 dB, a significant improvement over the previous engine's 100.2 dB SNR and −114.1 dB THD. Idle noise has also been reduced by 27.6 dB while maintaining the same output level convention. • Lossless DSD DST Encoding Support — Added lossless DSD DST encoding, allowing you to create DSD audio files approximately 50% smaller than standard DSF files without any loss of audio quality. • New Level Meter Window with Classic VU Meters — Added a dedicated Level Meter window featuring classic analog VU meters, along with new meter types and overall improvements to the level metering system. • New Direct Stream Capture Mode — Capture audio from other music apps and enjoy it through Pine Player's high-quality audio engine. • Improved App Launch Speed — The app now launches faster.

• DFF DST and New DST Format Playback in DoP Mode — When DoP mode is enabled, Pine Player can play both DFF DST and the new DST losslessly compressed DSD audio formats in native DSD through an external DSD DAC. • New DSD DST Lossless Format Support — The file converter now supports DST (Direct Stream Transfer), a lossless compression format for DSD audio. Convert DSD audio files to the DST format while preserving album artwork and metadata, reducing file size by approximately 50% compared to standard DSF files. Converted DST files can be played directly in Pine Player. • Enhanced DSD Conversion Engine — Introduced a newly developed in-house sigma-delta modulator and demodulator. PCM-to-DSD conversion now achieves 124.8 dB SNR and −136.9 dB THD, a significant improvement over the previous engine's 100.2 dB SNR and −114.1 dB THD. Idle noise has also been reduced by 27.6 dB while maintaining the same output level convention. • DST Lossless DSD Encoding — Added support for DSD DST lossless encoding, allowing DSD audio files to be compressed to approximately 50% of the size of standard DSF files without any loss in audio quality. • A new Level Meter window featuring a classic VU meter has been added, along with more meter types and improved level meter functionality. • SACD ISO compatibility has been improved, enabling playback and audio extraction from some ISO files that were previously unsupported. • Introducing the new Direct Stream Capture mode, allowing you to enjoy high-quality audio from other music apps.

• A new Level Meter window featuring a classic VU meter has been added, along with more meter types and improved level meter functionality. • SACD ISO compatibility has been improved, enabling playback and audio extraction from some ISO files that were previously unsupported. • Introducing the new Direct Stream Capture mode, allowing you to enjoy high-quality audio from other music apps. • Added the ability to rename files using metadata. • Fixed an issue where files were not added to playlists. • Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast.

• Introducing the new Direct Stream Capture mode, allowing you to enjoy high-quality audio from other music apps. • Added the ability to rename files using metadata. • Fixed an issue where files were not added to playlists. • Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast. • Fixed a crash that could occur when an error occurred on a DLNA network. • Fixed various minor bugs and improved stability.

• Introducing the new Direct Stream Capture mode, allowing you to enjoy high-quality audio from other music apps. • Added the ability to rename files using metadata. • Fixed an issue where files were not added to playlists. • Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast. • Fixed a crash that could occur when an error occurred on a DLNA network. • Fixed various minor bugs and improved stability.

• Introducing the new Direct Stream Capture mode, allowing you to enjoy high-quality audio from other music apps. • Fixed an issue where the same track could repeatedly play in playlists. • Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast. • Fixed a crash that could occur when an error occurred on a DLNA network. • Fixed various minor bugs and improved stability.

• Fixed an issue where the same track could repeatedly play in playlists. • Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast. • Fixed a crash that could occur when an error occurred on a DLNA network. • Fixed various minor bugs and improved stability.

• Added high-quality video playback. • Supports remote playback to Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast. • Fixed a crash that could occur when an error occurred on a DLNA network. • Fixed various minor bugs and improved stability.

• High-quality video playback has been added.
 • Supports remote playback on Smart TVs via AirPlay 2, DLNA/uPnP, and Chromecast.
 • Fixed minor bugs and improved app stability.

High-quality video playback support has been added. Remote playback to network smart TVs is now supported. (AirPlay 2, DLNA/uPnP, ChromeCast) Fixed a bug related to granting file access permissions. Fixed an intermittent crash that could occur while discovering non-standard DLNA/uPnP devices. Fixed a bug where the music file that was playing when the app was closed was not automatically selected when the app was launched again.

High-quality video playback support has been added. Remote playback to network smart TVs is now supported. (AirPlay 2, DLNA/uPnP, ChromeCast) Fixed a bug related to granting file access permissions. Fixed an intermittent crash that could occur while discovering non-standard DLNA/uPnP devices. Fixed a bug where the music file that was playing when the app was closed was not automatically selected when the app was launched again.

Added high-quality video playback support. Supports remote playback on network-connected Smart TVs. (AirPlay 2, DLNA/uPnP) Fixed a bug related to file access permissions. Fixed various minor issues related to video playback.

Added high-quality video playback support. Supports remote playback on network-connected Smart TVs. (AirPlay 2, DLNA/uPnP) Fixed a bug related to file access permissions. Fixed various minor issues related to video playback.

Video playback support has been added. From old video files to the latest 4K 60FPS videos, everything can now be played smoothly. Minor bugs have been fixed and overall stability has been improved.

- Added a feature to save Audio CD tracks as files with album art and metadata using the format converter. - Improved various issues in the format converter.

Fixed an issue where changes were not saved when copying or moving files after searching within a playlist. Added drag-and-drop support to copy and move files between playlists. Improved intermittent pop noise occurring at the end of DSD playback. Fixed audio truncation and pop noise issues during DSD encoding.

Added drag-and-drop support to copy and move files between playlists. Improved intermittent pop noise occurring at the end of DSD playback. Fixed audio truncation and pop noise issues during DSD encoding. Minor bug fixes and improvements.

Improved intermittent pop noise occurring at the end of DSD playback. Fixed audio truncation and pop noise issues during DSD encoding. Added synchronized lyrics display on the album art screen. Lyrics are automatically searched and loaded from the internet. Even if not immediately available, they may appear later once generated on the server. Added LRC editing feature to synchronize and edit lyrics in real time with music playback. Added support for AirPlay 2 multi-room playback. You can play music simultaneously on all AirPlay devices in your home by setting DAC mode to AirPlay 2 in Settings.

Added synchronized lyrics display in the Album Art view. Lyrics are automatically fetched from the internet, and may be generated and displayed later even if not immediately available. You can also edit and synchronize lyrics using the built-in LRC editor. Improved an issue with the UPnP DLNA Server. AirPlay 2 multi-room playback is now supported. Play music simultaneously on all AirPlay devices in your home. Simply set the DAC mode to AirPlay 2 in the settings window to use this feature.