1. Adjust the default network type of NRTK to adaptive. 2. Modify the entry position for creating maps. 3. Add silent activation for 4G cards. 4. Adjust the status carousel display on the homepage. 5. Add automatic activation of NRTK after binding devices

Optimize the 4G activation process of SIM card Optimize the logic of adding small red dots for RTK upgrade Optimize NRTK connection status Pop up a prompt when NRTK status detection times out in 3 minutes; optimize copywriting and provide English translation

1. Restore the factory reset secondary confirmation pop-up for new devices. 2. Optimize the interactive experience of the NRTK activation process. 3. Remove the Wi-Fi mode from NRTK. 4. Add a user notification marquee on the details page. 5. Optimize the caching strategy to ensure some functions work properly even when the network is poor. 6. Improve user prompts during map creation.

1. Restore the factory reset secondary confirmation pop-up for new devices. 2. Optimize the interactive experience of the NRTK activation process. 3. Remove the Wi-Fi mode from NRTK. 4. Add a user notification marquee on the details page. 5. Optimize the caching strategy to ensure some functions work properly even when the network is poor. 6. Improve user prompts during map creation.

1. Fix the positioning deviation issue when the machine is operating. 2. Fix the issue where the RTK sometimes incorrectly shows no signal.

1. Added fill light function 2. Introduce the NRTK Experience Program

1. Added NRTK function, which requires firmware version 1.3.6 or above. 2. Added silent retry function for RTK binding to extend the binding attempt duration. 3. Optimized lawn mowing route refresh. 4. Merged multi-task reports (resume mowing breakpoint report merging). 5. Added support to click and generate forbidden zones when obstacle escape fails in task reports. 6. Optimized UI for remote control mode. 7. New users will use AI lawn mowing by default. 8. Intelligent forbidden zones are automatically generated in AI lawn mowing mode without manual confirmation.

Languages of three new countries: 1.Lithuanian 2.Latvian 3.Estonian

1. Add a pop-up guide related to task parameters 2. Addition of special workspace function 3. Introduce remote control function 4. Added multi-device support for global pop-up boxes 5. Optimize the completion of intelligent channels 6. Optimize Bluetooth scanning logic 7. Optimize the UI for map saving failure

1. Add task report 2. RTK globalization 3. Optimization of joystick control

Optimize the map editing function

1. Add third-party login 2. HTTP modification of lawn mowing instructions 3. Optimize Bluetooth performance

1. Add third-party login 2. HTTP modification of lawn mowing instructions 3. Optimize Bluetooth performance

1. Interactive optimization of mapping 2. The breathing light flashes during RTK binding and restart connection 3. RTK weak signal collection and display 4. Switching between normal mode and RTK signal mode on the work details page 5. Open the large blade to adjust the mowing height

1. Customer service messages will have a small red dot prompt 2. The intelligent restricted area will merge the display of the restricted area at the end of the breakpoint task 3. Change the user information section to multiple selection 4. When binding RTK, the breathing light will flash

1. The newly added task is currently being executed. Enter the manual remote control page and send a command to stop the task. Resume the task when exiting 2. Add batch 202509 base station processing for Australian version 3. Fix the lighting voice page by clicking on a blank space

1.RTK version 450: V0.8.39; 2500: RTK scoring is only available if V0.9.39 is included or above. 2.Remote control line speed gear switching vibration feedback

1. Add region splitting and merging 2. Release the factory reset function 3. Add RTK manual upgrade

1. Integrate welcome page and advertisement images, supporting image loading from the network 2. Rewrite password input control (involving 86 lines of code) to fix the issue where the input method pops up only after two clicks 3. Synchronously integrate the new password input box into the registration page and forgot password page 4. Trigger full data acquisition when the app switches to the foreground 5. Integrate MQTT stress testing function 6. Fix the issue where message sending fails due to excessive speed caused by ineffective MQTT delay settings 7. Add switch control for the new Bluetooth protocol 8. Optimize logout logic so that the default language is not restored after logout 9. Fix the issue where synchronous Ping to Baidu after MQTT connection may cause delayed listening to subscription callbacks 10. Adjust the position of the remote control joystick to avoid blocking function buttons 11. Optimize Bluetooth scanner performance 12. Adjust MQTT QoS level to 2 13. Fix the abnormal display issue of the homepage buttons 14. Optimize the first-time use flow: guide users to select the pile placement position when starting a task for the first time after downloading the app 15. Block the display of RTK scores for 450 sets of devices 16. Fix the issue caused by type error in the mowing parameter page (the map mowing details page appears gray when opened) 17. Integrate the new remote control module 18. Fix the issue caused by untimely sensor refresh (abnormal alarm pop-up when the machine is lifted) 19. Refactor task-related logic: extract operation logics such as image switching for continuous mowing and forbidden zone floating buttons from the task details page to the homepage 20. Reorganize and optimize the homepage user guidance flow for the first installation of the app 21. Adjust the initialization logic for the first installation of the app to avoid startup crashes

I. Core Experience Upgrade 1. Optimization of Device Offline Handling • Iteration of device offline pop-up function: The original "Unbind Device" option has been replaced with the "Reset WIFI" function to help users quickly r estore network connection. • Device offline linkage mechanism: After the device goes offline, the RTK module will enter the offline state synchronously to ensure data consistency. • Enhancement of offline operation guidance: When clicking to start a task while the device is offline, a clear offline prompt pop-up will appear. 2. Comprehensive Optimization of Map Function • Upgrade of visual experience: Newly added area border display on the map list page makes map boundaries clearer. • Optimization of interaction logic: The map content will be automatically refreshed after returning from expanding the map, without manual operation. • Improvement of editing experience: Adjusted the UI interaction of the editing function on the map details page, making the operation process smoother. • Handling of abnormal scenarios: Compatible with the scenario where restricted area pictures are missing, and it can be displayed normally in the global mowing mode; the area mowing mode is under optimization, and a gift box placeholder is currently displayed. 3. Optimization of Control Experience • Upgrade of Bluetooth control: The interval for sending commands by the Bluetooth controller has been shortened to 10ms, making the control response more agile. • Enhancement of device details page: Newly added double-click restoration prompt, making the operation guidance clearer. II. Enhancement of Stability and Reliability 4. Improvement of System Stability • Fix of black screen issue: Resolved the black screen problem that occurs after returning from the map-building guide page and the black screen caused by abnormal forced solution. • Optimization of task logic: Fixed the abnormally popped-up power-off task, and avoided false triggering through map ID verification. • Correction of data display: After binding the device, full-volume subscription will be automatically issued, completely solving the abnormal issue where the power display is 0. 5. Optimization of OTA Upgrade Experience • Transparency of version information: Newly added display of the current version on the OTA upgrade page, making version management clearer. • Handling of abnormal scenarios: Fixed the problem of button status display during task execution after downgrading, and currently displays the "Unzipping Firmware" status correctly. • Visualization of firmware information: Newly added display of firmware version on the robot information page, making the device status clear at a glance. 6. Enhancement of Network Monitoring • Newly added continuous tracking of router network: Integrated ping detection function, which automatically maintains monitoring when the network is poor. • Global abnormal protection: Newly added crash log collection function, which automatically captures and uploads abnormal information in the background. III. New Function Addition and Interaction Optimization 7. Addition of Practical Functions • Enhancement of map management: Cleaned up cross-map-building data to improve the accuracy of map generation. • Optimization of interface display: Fixed the problem that the name on the map list page is too long and exceeds the screen, and realized automatic adaptive display. 8. Optimization of Interaction Process • Control of pile-lowering process: Disabled the manual cancellation function of the pop-up window during pile lowering, and only retained the prompts for the "Pile Lowering in Progress" / "Pile Lowering Failed" statuses. • Internationalization support: Completed the code branches related to country codes on the home page to improve adaptation capabilities in multiple regions.

Fix bugs and improve user experience

1. Provide new UI to improve user experience 2. Optimize the interaction logic of intelligent restricted areas 3. Add a confirmation button to the dialog box for failed pile removal 4. Verify if the QR code is correct when binding RTK

1. The extended warranty function is open 2. Lock the system font size and do not scale according to the system settings 3. Fixed the problem of not being able to click the registration button on low resolution phones with low screens 4. Optimize intelligent restricted area interaction

fix bugs

Optimize OTA upgrade page UI