- Continuous scanning: Capture multiple consecutive scans within a single scan session. This makes it easier to scan longer areas without unnecessary gaps and reuse existing markups in the next scan. - AI photo analysis notices: Users are now informed before capturing or importing photos when AI-based analysis is used. Detection masks also include a notice that AI-generated results may not always be accurate. Improvements - Easier login: Parts of the NET Cloud server address are now completed automatically. - Last server address saved: The most recently used NET Cloud instance is retained after logout and suggested again at the next login. - Warning for scans without markups: NET Scan can now warn users when saving a scan that does not contain any markups. - Direct navigation to missing information: If a scan cannot be uploaded because layers, required attributes, or photo tags are missing, the app now takes you directly to the affected section. - Improved upload and processing status: Status indicators no longer cover important map controls. - Default titles for scan photos: Uploaded photos automatically use the associated address as their default title. - Synchronized markups: Connected or snapped markups across scans within the same scan session are now synchronized consistently. Bug Fixes - Improved feedback when location access is disabled. - Improved guidance when the second manual positioning point is missing at the maximum scan size. - Empty photo titles and descriptions no longer display "Type here" as actual content. - Selected object types can once again be removed or deselected in markup details. - Added a confirmation prompt to prevent accidental loss of project photos. - Fixed a crash that could occur when opening photos in full-screen mode. - Fixed the scan quality indicator help display on iOS 18.1.1. - Fixed the display of nested multi-select fields.

- Scan upload in and presentation of projects with grouped duct types works correctly again

Version 1.2.16 focuses on performance and stability: scan restoration after tracking loss is improved, and scans now process faster. The update also adds a small number of new features and resolves several bugs. New Features - Add title and description in the photo preview — When taking a photo, a title and description can now be entered directly in the preview — without having to open the details page afterwards. Improvements & Optimizations - Scanning performance optimization — improved app restoration from tracking lost state. - Processing optimizations — scans are processing a bit faster now. - GNSS battery warning — A warning is now shown before starting a scan when the connected GNSS device's battery is below 20%. - Warning for flagged devices — When connecting to a known problematic device, the app shows a warning and directs the user to contact support. - Overhauled scan UI for portrait mode (iPad) — The scan interface in portrait mode has been optimized for iPad use: buttons are now easier to reach without repositioning hands. - Single points displayed above route points again — Points placed on a line are now correctly rendered above the route points. - Automatic timestamp naming for photos — Photos in scans are automatically named with a timestamp when no custom title has been assigned. - Button placement — Confirm button in markup details is now placed beside the delete button Bug Fixes - Placing a point outside of its allowed range is no longer possible, out-of-range distance is being indicated correctly again - When opening NETScan from Deeplink, the processing screen remains readable in light mode - Fixed issue where two project with shared name and ID had the app open the wrong project on launch - Switching scans from unavailable project into an available project is now working consistently - Overlays on photo refresh correctly when deleting points/lines

Release Notes 1.2.15: New Features - A visual quality indicator now shows in real time how well the environment is being captured during scanning: in difficult conditions such as low-contrast surfaces, users can adjust their scanning behaviour right away - RTK positioning can now be skipped when adding a photo: no waiting for a fix when the photo doesn't need a precise position - Photos now display the points and lines placed during the scan as an overlay, so markups are visible directly in the photo view of the job list - Deleting points or lines during scanning now shows a confirmation prompt, preventing accidental removal Improvements & Optimizations - If the app loses tracking during a scan, it now guides you through getting it back: return to an area you've already scanned and point the camera at the same view as before. Once tracking is restored, the scan stays correctly aligned, with no duplicate or shifted paths, even on large scans - The "Hold device upright" overlay now appears only after a short delay: brief tilts while placing points (e.g. at ground level or in a pit) no longer trigger it immediately - Object highlighting and selection during scanning has been reworked: highlighted objects are now clearly distinct from the object colour, and the selected object stays unambiguously in focus while editing - Messages about missing location data are now action-oriented - The "Comment" field is now called "Description": consistent naming with NET Cloud Bug Fixes - AR GeoLock no longer interrupts the scan when moving during reference-point selection - Changes to a title or description are now saved even when leaving the view directly via the back button - Dropdown selections when editing points and lines are now reliably applied on the first tap (iPhone and iPad) - The line type now updates immediately when changed during a scan - When an error occurs in manual positioning mode, the map and adding points remain available - After relocalisation, the scan no longer appears rotated and is placed at the correct position again after processing - Starting a new scan while others are still processing no longer makes the app appear frozen - The project selector frame is displayed consistently again after switching between projects - All materials in the markup details can now be scrolled through, even after a scan has been uploaded - Fixed crashes and freezes when opening scan details - Scan processing is more reliable: scans no longer fail during processing, and previously empty or failed scans now complete correctly

Release Notes 1.2.14: - Post-processing mesh correction now aligns scans against RTK anchors on the vertical axis as well, not only horizontally: longer scans deliver reliable altitude values even when ARKit Z-drift accumulates over the scan duration

Release Notes 1.2.13: - tilt overlay moved to top to not block collecting markups

Release Notes 1.2.12: - AI recognition has been expanded: twice as many object types (including safety barriers, duct bundles, fittings, manholes, trenches, trench sides and cabinets) are now detected and offered as tag suggestions for one-tap selection - Line markups now show the 2D (horizontal projection) length alongside the 3D length — useful for billing workflows that reference planimetric distances - During scanning, receiver tilt is now monitored and shown visually — for better positional accuracy and more precise altitude values - Scan altitude accuracy has been significantly improved: refined filtering of the reference points used to position the scan keeps unsuitable samples out of the result - The photo icon in the scan list now counts every photo, including those captured with line or point markups, so the number no longer changes after processing - The tag selection box no longer disappears when all suggested tags have been selected — tags can still be edited or removed - In photo-only mode the photo preview now has a consistent size, independent of the photo title length - The "Show Drawings / Recognized Items" button no longer flickers briefly when opening a photo that has no markups

Release Notes 1.2.11: - Edit and annotate photos before upload to highlight important details on-site - Capture photos in higher resolution during scanning for clearer results - Improved GNSS stability by limiting NTRIP connections to one per device - Fixed an issue where uploaded photos could be incomplete or corrupted - Resolved rare crashes when confirming inputs in the attribute dialog - Fixed an issue where the processing progress bar disappeared too early - Removed incorrect compass calibration warnings in Photo Mode - Corrected inaccurate timestamps for uploaded scans in Oracle projects

Release Notes 1.2.10: - Added support for freely placing reference points in AR GeoLock - Improved visibility of delete actions with updated red icon styling - Fixed an issue that could cause processing to freeze on certain scans - Resolved incorrect GNSS (GNGGA) data formatting for Emlid Reach RX receivers

Release Notes 1.2.9: - Fixed an issue with mesh positioning that occurred when additional markups were created after completing mesh capture. - Fixed an issue in the mesh data that caused a memory leak in the NET Cloud 3D Viewer. - Adjusted the texture capture filter to be less aggressive in order to improve capture performance.

Release Notes 1.2.8: - fixed mesh correction bug when markups were created outside of scan boundary in long thin scans

Release Notes 1.2.6: Improvements and Optimizations: - Improved performance and reduced resource usage during scan processing - Deleting markup photos is now only possible if the related markup has been removed - Firmware update notification is now shown only once per day per GNSS device - Point photo in scan details has been replaced with a photo icon in the point preview - Updated visual design of the geo point preview Bug Fixes: - Fixed incorrect display of geo points in the scan view - Fixed an issue where the blue scan overlay was displayed incorrectly - Adjusted depth evaluation logic and corrected the preview display - Fixed warning message for missing point photos - Fixed red out-of-range marker for placing line points - Fixed line point placement ring not showing when opening NETScan from NETBuild - Fixed crashes when processing or uploading large scans

Release Notes 1.2.5: - Aerial background in scan map view: The scan map view can now display an aerial imagery background to better understand the spatial context of recorded scans. - “Reset view” in 3D model: A new “Reset view” button allows resetting the camera to a default perspective with a single tap. - More robust uploads with queue handling: Uploads of scans and photos are now processed via an upload queue, so a failed upload no longer blocks subsequent uploads. - Targeted cancellation of scan processing: Individual scan processing jobs can be canceled without stopping other scans in the processing queue. - Improved 3D models: Reduced artifacts at the borders of the 3D mesh and more reliable detection and filling of missing triangles for smoother, more consistent models. - GNSS integration and position handling: Improved behavior with external GNSS receivers, prevention of internal GPS remaining active when an external device is selected, more robust handling of invalid map coordinates to avoid crashes, and more reliable anchoring of photos, lines, and points to the 3D model even when coordinates shift. - Upload of extended device information: New scans now upload additional device metadata such as operating system version, device model, and used RTK service to support better traceability and troubleshooting. - NETCloud integration: Clearer messages when NETCloud is in maintenance mode and improved handling of users with read-only access, including clearer feedback and restricted actions. - Stability when returning from background: Fixed issues where error messages were shown or features were blocked after returning from the background; ARKit crashes are now handled in a way that preserves already captured data as much as possible. - Photo upload issues: Fixed problems where photos or scans containing photos were not uploaded correctly, and ensured the address is reliably used as the default title when uploading photos. - Attribute dialog and scan attributes: Fixed the behavior of OK and Cancel buttons and resolved issues with displaying and editing scan attributes. - GNSS and map view: Fixed app freezes when using certain controls while connected to a GNSS device and resolved crashes caused by invalid coordinates in map views.

Release Notes 1.2.4: - Fixed an issue where uploads were shown as failed despite completing successfully.

Release Notes 1.2.3: - Markups: Automatically preloads attributes from nearby markups of the same type to speed up annotation - Scans: Improved stability and AR performance for large scans, with correct display of parallel processing tasks.

Version Notes 1.2.2: - Photo mode now supports zoom levels and photo light - Material selection now allows multi-selection - Attributes for point and line markups are now automatically prefilled with suggestions from nearby objects - Object snapping for markups within the same scan - 3D preview on the phone now displays markups - Firmware updates for GNSS receivers are now shown as a popup - Fixed an issue where the blue overlay was flickering during scanning - “Okay” button no longer blocks markup selection - Removed the cursor from camera mode

Release Notes 1.2.1: - Hotfix for app crash during start when scans without location were stored on device

Release Notes 1.2.0: - Photo Mode: Upload photos from gallery or camera – even without a 3D scan - Automatic Deletion: Uploaded data can be automatically removed after a configurable period - Revamped UI: New start menu with a bottom navigation bar - Performance: Improved speed and stability of scan processing - General: Various bug fixes and optimizations

Release Notes 1.1.6: - Fix for upload issue when uploading to NET Cloud during maintenance

Release Notes 1.1.5: - Added processing & upload screen for NET Build integration - Fixed a crash during scan processing

Release Notes 1.1.4: - Improved detection and exclusion of faulty RTK fix positions in obstructed areas. - Fixed an issue causing incorrect scan rotation after interrupted processing. - Scan size limits are now correctly enforced again. - Failed scans can now be exported and sent to TKI. - Log files uploaded with scans now include only the last two scans. - Memory usage during processing reduced by 50%. - Translations updated.

Release notes 1.1.3: - The app checks for updates once every 24 hours if enabled in the project config. - Tapping the version label in the Help screen opens the App Store. - Only published projects are displayed. - Project boundaries are now included. - Project switching is faster and more reliable. - Mesh correction issues have been fixed. - Switching between Oracle and PostgreSQL projects now works correctly. - Uploads are blocked if the new project has incompatible point/line configurations. - Scans still processing can no longer be added to the upload queue. - Symbols now update immediately to reflect current error states.

Release Notes 1.1.2: - Improved NTRIP connection – now activates only during scans. - Fixed scan attribute formatting for Oracle compatibility. - Deleting a scan now properly cancels upload and processing. - Prevents automatic upload if the last session crashed. - Fixed an issue causing infinite login loops after token refresh. - "Upload All" button now updates correctly when switching projects.

Release Notes 1.1.1: - fixed incorrect filename for photo uploads

Release Notes 1.1.0: Scanning & AI - Photos are now automatically tagged with AI-generated keywords for easier categorization. - Detected objects are displayed as visual overlays using image segmentation. - AI recognition is linked to NET Cloud tags, enabling direct classification. Photo & Scan Functions - After taking a photo, the app now automatically opens the detail view. - Keywords can be assigned to photos, with configurable suggestions and mandatory selection options. - The camera perspective is recorded and uploaded together with the photo. Configuration & Usability - Markup attributes can now include mandatory fields. - Default values in dropdown lists now work reliably. Backend & Upload - The “Upload All” button now shows a confirmation prompt before uploading. - Re-upload has been improved: after deletion in NET Cloud, scans are recognized as “not uploaded” and can be re-uploaded easily. Platform - The app is now fully optimized for iPad use. - Firmware updates for TKI Align Pro receivers can now be triggered directly from the app. Bug Fixes / Improvements - Texturing has been significantly improved for surfaces with poor angles. - Scan downloads no longer overwrite existing geometries. - A clear error message is shown if compass calibration is disabled in system settings. - Fixed overlapping menus and display issues with markups. - Prevented crashes when the backend returns empty polygons. - Loading animation after login now works as expected.