Poor Man's Throttle
PMT
Free · Designed for iPad. Not verified for macOS.
Poor Man's Throttle now has Sound!! Ditch expensive throttles. Control your model trains wirelessly with your phone—smooth speed, strong starts, and simple DIY hardware.
FREE DIY Wireless Model Train Control — Built for Hobbyists,
**Poor Man’s Throttleturns your smartphone into a wireless throttle for model trains.
Designed formodel railroad hobbyists, makers, and DIY builders**, the app allows you to control a locomotive using inexpensive electronics instead of costly commercial control systems.
With simple ESP32-based hardware, your phone becomes asmooth, responsive wireless throttle**.
---
Smooth Motor Control
Many traditional DC transformers struggle with low-speed operation.
Locomotives often:
• hum at low speeds
• start with weak torque
• move in jerky steps
Poor Man’s Throttle solves this by usingPWM motor control (Pulse Width Modulation)instead of simply lowering voltage.
This allows locomotives to:
• start smoothly
• run at extremely slow speeds
• maintain strong torque
• eliminate most transformer hum
---
Wireless Smartphone Control
Control your locomotive directly from your phone.
Features include:
• Speed control
• Forward direction
• Reverse direction
• Stop
• Additional command support
Because control is wireless, you canwalk around your layout while operating trains**, just like with professional wireless throttle systems.
---
A Major Upgrade for Traditional DC Layouts
Poor Man’s Throttle works especially well with classic DC transformers.
Instead of using the transformer to regulate speed, the transformer is set tofull powerwhile Poor Man’s Throttle performs the motor control using PWM.
This approach provides:
• smoother slow-speed operation
• higher starting torque
• reduced transformer noise
• modern wireless control for classic layouts
---
Perfect for Dead-Rail Builders
The system also works extremely well withdead-rail locomotivespowered by onboard batteries.
Builders commonly use:
• cordless tool batteries (DeWalt, Milwaukee, Ryobi, etc.)
• lithium battery packs
• LiPo or lithium-ion cells
• NiMH packs
• other hobby batteries
This flexibility allows hobbyists to useinexpensive, widely available power sources**.
---
A DIY System That Costs Around $20
A typical Poor Man’s Throttle hardware build costs about:
• ESP32 development board
• IBT-2 motor driver
• 5V logic power module
Total hardware cost is oftenaround $20 per locomotive**.
Many builders already have some of these parts available.
---
Built for the Model Railroad Community
Poor Man’s Throttle was created to makewireless train control accessible to everyone**.
Instead of expensive proprietary systems, this project focuses on:
• simple hardware
• open DIY building
• affordable components
• sharing knowledge with the hobby community
The goal is simple:
**Give model railroaders a powerful wireless throttle they can build themselves.**
---
Who This App Is For
This app is ideal for:
• model railroad hobbyists
• dead-rail builders
• DC layout operators
• electronics makers and tinkerers
• DIY train control enthusiasts
Bothbeginner buildersandadvanced hobbyistscan use the system.
---
Learn More
Hardware build guides, documentation, and project information are available through the Poor Man’s Throttle project resources.
https://github.com/jamocle/PoorMansThrottle-DIY/blob/main/README.md
Build your own throttle.
Control your trains wirelessly.
Keep the hobby affordable.
### Version 4.3.10
* **Added FTP Support** PMT now supports FTP to transfer files to and from the PMT device. This makes it easier to transfer files to and from PMT.
* **Added more support for Poor Man's HID** Even more support for HID Physical devices wityh Enhances Panbel like Physical Screen Layout in the App.
* **Added Poor Mans Controllers** New non Throttle firmware to handling tasks like turnout switches, sound, lights for other areas of your layout.
* UI/UX Enhancements
* **Misc refinements and bug squashing** The code monkey has been busy (me).
### Version 4.2.14
* **Added support for App Side Audio Output Control** Now yu may setup app-side Audio COntrol that wont take up precious FX slots
* **Misc refinements and bug squashing** The code monkey has been busy (me).
### Version 4.2.12
* **Lockout Mode** PMT now supports lockout mode so only the device that has it locked may connect to it.
### Version 4.2.11
* **New FX Commands** Added Firmware Run Script and Firmware Run Script Repeat.
### Version 4.2.10
* **New App diagnostic mode** Now the app can be in diagnostic mode as well to capture anything that happens in PMT.
* **Fixed issues with older iPads**. Some older iPads had issues with rendering output controls. This is fixed.
### Version 4.2.9
* **Security Enhancements** Modified the code to stop from sessions being stolen.
* **Physical Screen Organization Updates** The system allows for the buttons to be re-organized in the physical screen.
### Version 4.2.7
* **Grade Crossing Sounds** Added support for Grade crossing sounds.
### Version 4.2.6
* **Diagnosis Mode Available** Added diagnostic script inside the app to help with diagnosing problems.
### Version 4.2.5
* **Made Connecting to a throttle more efficient** Now CV's will only be loaded when the app senses they need to be loaded. Faster connect and throttle entry times.
### Version 4.2.4
* **Added RESTful Support** PMT can now integrate with RESTful API's or any HTTP(s) endpoint for even more integration possibilities.
### Version 4.2.3
* **Added support for Remote Commands** Now an FX command can be mapped to a remote Command Relay where the target device is instructed to tell another device to perform a command.
* **Enhanced Bulk Transfer Resilience** The BTP (Bulk Transfer Protocol) is more resilient.
* **FX Reorder enhancements** Reordering sometimes caused saving issues. now the reordering uses a quiescing strategy to eliminate this issue.
* **Added DISCONNECT** App script token to disconnect the current session and return the user back to the scan screen.
### Version 4.2.0
* **Enhanced Output Control Reconciliation** Enhanced reconciliation of controls for to help older iOS devices show updated data.
* **Wifi SSID Chooser** The app now will allow you to choose your Wifi SSID from a list.
### Version 4.1.10
* **Fixed WIFI password saving for some Android users** Some Android users were unable to save passwords.
### Version 4.1.3
* **Added support for Urdu language in Pakistan** Pakistan residents are using PMT!!
* **Fixed some localization issues** Some vestigial words weren't being translated and now fixed.
### Version 4.1.2
* **Enhanced User Interface for Throttle and Feather Brake** Modified to support Realistic Mode for Feather Brake and enhanced telemetry for UI information.
* **Added Switcher Mode as a selectable Physical Control** Users can now assign switcher mode to an HID key.
* **Added battery saving view for physical throttle** The physical throttle view can now go into battery saving mode for the smart device.
* **Added support for Min Reverse Throttle** The app now supports min throttle for reverse and has a wizard to guide the user into setting it properly.
* **Fixed password Timeout issue** Some users were experiencing timeouts when saving Wifi password.
The developer, James Theimer, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Collected
The developer does not collect any data from this app.
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
- Seller
- James Theimer
- Size
- 124.2 MB
- Category
- Utilities
- Compatibility
Requires iOS 15.0 or later.
- iPhone
Requires iOS 15.0 or later. - iPad
Requires iPadOS 15.0 or later. - iPod touch
Requires iOS 15.0 or later. - Mac
Requires macOS 12.0 or later and a Mac with Apple M1 chip or later. - Apple Vision
Requires visionOS 1.0 or later.
- iPhone
- Age Rating
4+
- 4+
- This app is rated 4+ with content restrictions.
Some content may be rated higher, and may therefore be restricted and managed by the developer through in-app controls. - In-App Controls
Parental Controls
- Copyright
- © 2026 James Theimer

