• Frames mode: tap FRAMES in the lens menu to see a rangefinder-style bright line for every lens in your kit, with the active one in orange. • The right lens for the shot: the viewfinder now frames through the sharpest back camera that holds your crop (ultra-wide, wide or tele), so long lenses look crisp. You can pin a lens in Settings (iPhones with LiDAR). • Telephoto spot meter: spot readings go down to 1° through the telephoto, with a circle drawn at the exact metered size (Pro). • Multi-point meter calibration: calibrate against your reference meter at several light levels, per lens, for readings that stay accurate from shade to sun. • Lens framing calibration: fine-tune each back lens's field of view with a sheet of paper, so the crop matches your camera exactly. • Hardware buttons: map the volume buttons, Camera Control, the Action button or a Bluetooth remote to shutter, timer, freeze, lens steps and more. • Lock Screen timer: the long exposure countdown now shows on the Lock Screen and in the Dynamic Island, with an optional end-of-exposure alert. • Rotate the preview 90, 180 or 270 degrees, globally or per kit. • Grid and level are remembered across restarts, and rise, fall and shift now stop at your kit's max travel. • Reorganized Settings: Viewfinder, Exposure, Capture & rolls and Calibration. Values a kit can override are tagged KIT.

- Rotate the live preview 90°, 180°, or 270°. Set it globally or per kit, for cameras and adapters that hand you a turned image. - The rise, fall, and shift arrows now stop at your kit's travel limits. The old "Panorama shift" section is renamed "Max rise, fall, shift", since those values always described both uses. A side left at 0 stays unbounded. - Grid and bubble level stay on across restarts, so your framing setup survives closing the app. - Film list no longer jumps when you star a stock.

- Grid & level stay put: the composition grid and bubble level overlays now remember whether you left them on. - Cleaner custom film form

- Workspaces: design your own bottom control panel per kit. Arrange the controls you actually use, then switch layouts with an edge-swipe on the viewfinder. Start from the built-ins (Default, Frame, Meter) or build your own in Settings (Pro). - Freeze mode: pause the frame on a still to compose rise and shift, spot-meter any point, and probe distance anywhere in it, all without the scene moving. - Richer exports: save a frame with a full data overlay including exposure, film, kit etc. - Bellows factor compensation: a new BELLOWS meter cell folds close-focus light loss into your reading for macro and large-format close-ups, set manually or by LiDAR. - Custom film stocks: add your own stocks, tag them color or B&W, set the white balance, and tune the reciprocity curve. Now with a dedicated ECN-2 category. - Simulate B&W film with color filters in the preview and captures, and preview color-film white balance derived from the loaded stock. - Hold and drag to switch values much quicker (on lens, film, format, grid, aprture, speed, comp, filters) - A lot more settings (timer options, increments, miror image), all rearranged into global parameters and by kit.

Dial in your panorama range: long-press PANO to open the shift sub-menu, then use the two sliders to trim how far the composite reaches on each side of the axis. The dashed plates and stitched crop update live as you drag.

- VZ-6617 checklist template: load the full shooting sequence in Settings. The exposure step auto-fires the shutter and the advance step shows the live wind-to frame for the selected format.

- Add a preset system - Preset for the VZ-6617 camera with a dedicated feature for film advance

- Pick which side your landscape controls sit on: Classic Left, Classic Right, or the Compact two-row layout. Saved per kit so every camera feels right in the hand. - Upside-down portrait now works. Flip the phone over and the whole viewfinder rotates to match. - Toggle COMP in the feature settings. - Reworked shutter panel: switch between Global, Spot, and Manual metering from a single tab strip, with a clearer meter-state readout in the shutter cell. - Clean of the main screen, no more overlap issues, more consistent font sizes and more

- Lens filters: list the ND, polarizer, and color filters mounted on your lens. The meter compensates the recommended shutter and every capture logs them. - Digital sensor formats: the format picker now has Film and Digital tabs, with sensor sizes from compact up to medium format. - Square 1:1 composition grid for framing square crops. - The shutter readout can now show the metered EV instead of the shutter speed. Choose SPEED or EV in Settings. - Long-press PANO to save the stitched panorama preview as a planning image.

- Spot meter: tap anywhere on the preview to meter from that point. Pair it with the new meter calibration in advanced settings for precise readings. - Group your captures into rolls in the gallery by kit and film stock. - Per-kit shot checklist. Create your steps in settings and advance them from the viewfinder, with optional auto capture. - Panoramic stitching simulation with auto calculation from your format and your max shift. - Set the parallax subject distance manually with a slider. Parallax correction now works on iPhones without LiDAR too. - And a handful of correctness fixes.

- quick bug fix

- Manual meter preview BETA: enable it in Settings under Light Meter. In manual shutter mode the viewfinder preview should dim or brighten to match your selected speed. The EV number in the shutter button shows how many stops you're off from the metered light. - Kit film stock: the film stock you pick is now saved per kit. Switch to another kit and back, and it should remember what you had. - Custom ISO label: when you're using a custom ISO, the info bar now shows ISO instead of FILM.

- Edit film stock, aperture, shutter, or ISO on any capture in the gallery. - Add notes to captures. - Export the gallery as a CSV for film logs and spreadsheets. - Long-press the GRID button to switch families (rule of thirds, phi, golden triangle, custom). - Measure now stays on across launches. Tap to refresh the reading, long-press to turn it off.

- Custom apertures: enter any f-stop and save it to your list - Custom shutter speeds: enter decimals (1.5) or fractions (1/5, 1/10) and save them

- Metric or imperial units toggle. - Add custom film formats and focal lengths during onboarding.