Permits and job notes now ride along with the job, and both show up in the report your customer gets. Any material line can carry the manufacturer, catalog number and supply house you actually buy from. OHMIE sizes the part, you name it, and your entry survives a re-size. Check the whole breaker schedule on one screen before it turns into a material list: every line as you'd order it, the device count, and how many panel spaces you have left. Switches are counted by location now, so two switches in a two-gang box is one box and one two-gang ring, not two of each. Bigger jobs are covered. Conductors run to 750 kcmil and up to four parallel sets, conduit to 4 inches. Past what OHMIE carries it tells you what it would take, instead of quietly handing back its own largest size. Also: plug-on neutral asked and printed on every breaker line that needs it, per-circuit labelling on multi-circuit lighting jobs, and a long list of sizing and code-citation fixes.

NEW — SUBPANEL INSTALLATION (COMMERCIAL) Size a commercial subpanel feeder end to end, developed with our master electrician from a line-by-line review of the real workflow. • Panel configuration up front — main lug only or main breaker, bolt-on or plug-on — with every breaker matched to the mounting you choose. • Raceway and conductor insulation as separate choices, so a spec calling for XHHW-2 in EMT is straightforward. • EMT fittings and supports ordered the way you actually buy them: set-screw or compression, steel or zinc die-cast, one-hole or two-hole straps, strut, or Minerallac-style bolt-close clamps. Counts come from your run length and terminations, and you split them across the products you picked. • Junction and pull boxes sized on pulling geometry, with the entry-spacing check that box dimensions alone don't prove. • Conduit bodies that inherit the calculated raceway trade size and bring matching covers and gaskets. • Branch-breaker schedules showing occupied and remaining panel spaces, with the neutral bar and equipment grounding bar listed under the panelboard. ALSO IN THIS RELEASE • RMC added as a wiring method, and PVC now asks Schedule 40 or Schedule 80 — each sized from its own fill table. • Equipment grounding conductors sized per 250.122(B) when voltage drop increases the ungrounded conductors. • Redeem offer and promo codes directly from the plans screen. • Purchase flow and performance improvements.