Cabinets on adjustable legs, plinths to hide them, and cut diagrams that tell the saw what to do. WHAT'S NEW • Frameless cabinets on adjustable legs. Every base, corner, tall and vanity cabinet is now also offered on levellers instead of an integrated toe kick. Set where the legs stand, how many a wide cabinet gets and what a leg costs for your shop, a job, a room or a single item. • Plinths. Add a plinth in the plan to hide the legs: it wraps the exposed fronts and ends with mitred corners. Plinth has its own material setting, which starts as your door sheet. • Plinth is cut the way shops do it: as full-length strips, listed once per height in the bill of materials and nested on your cut diagrams with the cabinets, with the lengths to chop on site. • Legs are counted and priced in the estimate and the bill of materials. • Exported cut diagrams now give the size of every cut, with a cut sequence page for each sheet. Edges that no part touches are no longer trimmed. • Fifteen new 3D objects in Legs & Casters: cabinet legs, casters, furniture feet and legs, and table bases. • Choosing a frameless library in the Item Library also shows the uppers and panels, and each library's count matches what it lists. • New What's New and Tips screens after launch, and a clearer room menu. Plus new help for everything above.

Faster wall elevations, and drawings your installer can build straight from. WHAT'S NEW • Add doors and windows right from Elevations. Pick one and it goes into the wall you're looking at; drag it into place, where it snaps to cabinets, the sink and other openings, or tap it to adjust its size and position, duplicate it or delete it. • Fridges, ranges, dishwashers, range hoods, washers and dryers now get their own dimensions on the plan and on elevations, so every space along the wall is measured. • Door and window settings now start with the size, and position reads From left and From right, just like your cabinets. • Casework reopens where you left off: on the Items or Jobs tab, and in your job on the tab you were using. • Elevations show every door exactly as it's hung, and appliances are drawn with their own doors, handles and controls. • Backsplashes snap to the wall, cabinets, countertop, doors and windows as you draw them. • Sinks, cooktops and faucets center themselves on the cabinet below, and their countertop cutouts follow their size. • Resize a 3D object and it's drawn at its new size everywhere: in 3D, on elevations and in your PDFs. • Better 3D: views open in front of your cabinets, the lighting follows you as you turn the room, and 3D pictures in drawing PDFs are twice as sharp. • Corner cabinets now come hinged left and hinged right. • Pinch to zoom without nudging the cabinet under your finger. Plus new help for everything above.

Backsplashes you can draw on the wall, and handles placed where a hand reaches. IN THE ROOM PLANNER • Draw a backsplash on any wall in Elevations: tap its corners, choose a tile, stone, concrete, brick or metal finish, and see it in 3D and on the drawings. Doors and windows cut through it. • Elevations has a new layout: tools on the left, the wall and selection on the right, and arrows to move between walls. • Delete item now sits at the top of a selected item's inspector, with its size fields beneath. • Fixed a countertop that crossed itself over an L-shaped base corner when an upper corner cabinet shared its walls. DOORS AND HANDLES • Handles and knobs are placed from each door's height above the floor, around 42 in, and appear on item pictures, in 3D, on elevations and in drawing PDFs. A position you set yourself always wins. • Production drilling follows the same positions, including cabinets installed at different heights. IN THE LIBRARY • The tag filter leads with Base cabinets, Wall cabinets, Tall cabinets, Sink cabinets, Corners, and Panels and fillers. IN JOB PROPERTIES • Door and drawer fronts has its own page, Schedule is now called Scheduling, and Parameters comes last. IN HELP • New help for drawing backsplashes and for the new Elevations layout.

Easier to find your way around, with pictures in the help. IN THE LIBRARY • Filter the item library by collection — All, My Items, Essentials, Frameless or Range hoods — with a count on each. Your choice is remembered, and the same row is in Order Entry and the room planner. • Item pictures now show the appliance an item holds, so an oven tower or a base microwave no longer looks like an empty hole. IN THE ROOM PLANNER • Adding comes first in the Items & room panel: an Add item button, then tiles for a 3D object, countertop, wall, door or window, molding and field condition. Room settings fold away below, each showing its current values. IN HELP • Step-by-step guides with annotated pictures for adding walls, countertops, 3D objects and moldings, adding parts and operations, setting your costs and adding your own materials. • Search the help, and open a result at the right section. ALSO • More of the interface follows the app’s language in German, Spanish, French and Portuguese, including the sheet, joint and paint editors and the room planner’s inspector.

New range hoods, and cutting diagrams that follow your machine. RANGE HOODS • A new Range hoods collection in the library: straight hoods in 30, 36 and 42 inch widths, and curved hoods in the 3636 and 4236 series sizes, each with a bell or a straight-sided shape. • A straight hood resizes by its overall width, height and depth, and its duct and stretcher widths are named parameters you can change. • The bent skins of a curved hood are developed flat, so the cut list and cutting diagrams carry them as full-size blanks. CUTTING DIAGRAMS FOR YOUR MACHINE • Choose what you cut on. For a beam saw, parts are laid out for cuts that run edge to edge, made in stages. For a CNC router, parts are nested by their true shape. • Set it once in Settings for new jobs, or change it for a single job or item. ALSO • A cutout that removes nothing, or leaves a part in pieces, now flags the part with “Check its size and position” instead of drawing the part whole. • Help now covers range hoods.