MultiVolt
Every camper battery at once
Free · In‑App Purchases · Designed for iPad. Not verified for macOS.
Reads Ective, JBD and Daly straight over Bluetooth: state of charge, current, cell voltages and temperature for every battery — and what the bank has left together.
MultiVolt shows what your camper batteries are doing — all of them at once.
The app connects over Bluetooth directly to the battery management system and reads what it measures anyway: state of charge, voltage, current, power, every single cell voltage, temperature and the BMS protection flags. No account, no cloud, no internet.
THE WHOLE BANK AT A GLANCE
Several batteries add up to one balance — weighted by capacity, not simply averaged. A 200 Ah battery at 90 % and a 50 Ah one at 10 % make 74 % together, not 50 %. Runtime is calculated from the smoothed current: a cycling compressor fridge no longer makes the estimate jump between 40 hours and 2 hours.
EVERY CELL ON ITS OWN
Cell voltages as bars, the spread in millivolts, the active balancer. When a cell drifts away, you see it before the BMS shuts down.
LIMITS YOU SET YOURSELF
State of charge, cell voltage high and low, cell drift, temperature, charging in the cold, current. Per-battery limits where batteries differ — a 280 Ah battery takes currents a 100 Ah one does not.
HONEST READINGS
A value the BMS does not report shows as "--", never as zero. Zero is a statement; a missing value is not. When a protocol reports no protection status, it says so — instead of a reassuring green check mark.
TRY IT WITHOUT A BATTERY
Demo mode simulates three batteries with real LiFePO4 physics and stays free forever. You see the whole app before pairing anything.
SUPPORTED SYSTEMS
• Ective and identical Topband modules (also StartCraft, KiloVault, Wattstunde)
• JBD / Xiaoxiang and equivalents
• Daly Smart BMS (D2 series and relatives)
FREE AND PRO
One battery is free — with every reading, all limits, the history and all warnings. MultiVolt Pro monitors up to six batteries at once.
IMPORTANT
MultiVolt is a display and a log, not a safety device. No commands are sent over Bluetooth — the app only reads. Deep discharge protection, cut-off and overcurrent protection belong in the BMS and must work without a phone.
SUBSCRIPTION AND TERMS
MultiVolt Pro is a subscription with a monthly or yearly term. It renews automatically until it is cancelled; cancellation is done in the App Store account at least 24 hours before the current period ends.
Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Privacy Policy: https://multivolt.dkcloud.at/privacy
Ratings & Reviews
- This app hasn’t received enough ratings or reviews to display an overview.
The developer, Daniel Kofler, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy .
Data Not Collected
The developer does not collect any data from this app.
Accessibility
The developer has not yet indicated which accessibility features this app supports. Learn More
Information
- Seller
- Daniel Kofler
- Size
- 45.3 MB
- Category
- Utilities
- Compatibility
Requires iOS 16.4 or later.
- iPhone
Requires iOS 16.4 or later. - iPad
Requires iPadOS 16.4 or later. - Mac
Requires macOS 12.0 or later and a Mac with Apple M1 chip or later. - Apple Vision
Requires visionOS 1.0 or later.
- iPhone
- Languages
English and 11 more
- English, Arabic, Dutch, French, German, Italian, Polish, Portuguese, Simplified Chinese, Spanish, Swedish, Turkish
- Age Rating
4+
- 4+
- In-App Purchases
Yes
- MultiVolt Pro — yearly $17.99
- MultiVolt Pro — monthly $2.99
- Copyright
- © 2026 Daniel Kofler