NEW + Support for Accessibility features (dynamic font scaling, VoiceOver, etc.) + Shows busy indicator in the Device View during data requests FIX + Fixed bug in Plant View where “Energy Today” was not displayed initially + Corrected text color issue when switching between dark and light mode in Plant View + Reduced flickering issue in the Settings View on macOS devices + Some minor bug fixes

We’ve worked hard to make the app even better for you! Here are the key updates: + Stay connected on the go: The app now supports VPN connections (e.g., WireGuard or IPSec), allowing you to securely access your home while on the move. + SMA Data Manager support: The SMA Data Manager is now supported as a device. + New icons for better clarity: We’ve added icons for more device and sensor types, making everything easier to recognize at a glance. + Improved device view: The device view has been redesigned for better clarity and now provides more detailed information, such as the power and voltage of additional device inputs. + Bug fix: We’ve resolved an annoying crash that occurred after entering a device name. Thank you for using our app! If you enjoy the updates, we’d love to hear your feedback through a review. Enjoy the new version!

- [FIX] Fixes a small bug when opening a sub dialog in settings

- [FIX] battery state of charge (SoC) for battery and hybrid inverters (SoC) was not displayed correctly

The app has been improved! This is new: [NEW] The total solar power can now be displayed in the mix with inverters and SMA Energy Meters / Home Managers [NEW] Support for the input DC voltages of some inverter types (STPSE). [NEW] Manual addition of Modbus inverters in the app that do not want to be detected automatically. [FIX] Removed some minor visual artifacts in the power flow diagram [FIX] Correction of total „state of charge“ for systems with multiple batteries [FIX] Crash during chart scrolling removed

The app has been improved! This is new: [NEW] Force Dark Mode: The app can be forced into "dark mode". In addition, display problems in the dark appearance have been fixed. [NEW] In the charts, the measured values can be exported as CSV, e.g. to Numbers... [NEW] Revision of the settings for the solar power display: A meter can only be assigned for grid supply/output or for solar power, not both. [NEW] Support for more SMA meters and devices. [FIX] On the iPad a menu was displayed multiple times under certain conditions. [FIX] In case of multiple battery devices, the battery charge level was possibly used from an inactive battery device or was not shown at all. Have fun using the app!

This update offers the following bug fixes: [FIX]: In the charts of Energy Meter / Home Manager resulting power was not drawn [FIX]: In the dialog instantaneous values "active power" was not shown [FIX]: Some improvements device rotation in iOS 16

With this update the app offers the following new features and bug fixes: + [NEW]: User adjustable device names. + [NEW]: Rework of joining multicast network. + [NEW]: Significant performance improvements in processing device data processing (especially noticeable in charts in iOS9.x). + [FIX]: The timestamp was displayed incorrectly on the chart value marker (iOS9.x).

With this update the app offers the following new features and bug fixes: [ADD]: Support for iOS's "Guided Access" also called "Kiosk Mode". When turned on, screen switching is disabled. An iPad can be used unattended in public spaces as a solar visualization device. 
[ADD]: Support for "indoor temperature" for some device types. [ADD]: Turbo start for inverter communication: fast start of inverter communication. [ADD]: Improved and optimized Modbus communication with timing settings and error recovery. IP address changes are automatically detected. [ADD]: Support for more additional inverters. [FIX]: Fixed some chart layout errors [FIX]: Error cleanup of units for Energy Meters [FIX]: Power Flow Display: Support of battery charging from grid

With this update the app provides the following new features and bug fixes: [FIX]: Correct query of battery values (charging/discharging) of battery devices (Sunny Island, Sunny Boy Storage) [FIX]: Some more Modbus communication improvements (TCP connections could be consumed) [FIX]: Added some missing English translations [FIX]: Rare crashes in device selection fixed [FIX]: Rare crashes during device name resolution fixed [ADD]: Device lists are now stored even after app termination (less device detection) [FIX]: Some minor improvements

With this update the app supports the following new features: * You can now directly use SMA solar, battery and hybrid inverter devices. This allows you to monitor fast data updates of your solar devices and sensors! (The MODBUS protocol has to be enabled on these inverters). * You can easily detect these (MODBUS enabled) inverters on you local network without configuration (device auto-detecting). * With the new "Solar Power Flow" display, you will able to watch your solar plant in a new combined view with very short response times.

- Communication improvements on older iOS versions - Fixed reverse DNS resolving bug. Sensor name was not displayed on top - Fixed colors in plotter chart when in dark mode - Improved text layout for longer texts in sensor details (for smaller screens) - Renamed "grid consumption" and "grid feed-in" for better understanding - Fixed a crash bug when tips was displayed - Fixed help displaying on older iOS versions - Fixed value marker value on chart plotter (wrong value) - Help/FAQ can be opened with external browser now - Fixed bug when editing items in consumption dialog - Device/Sensor list ist now sorted by name - Switching sensors in one dialog switches sensors in all other dialogs now - App saves sensor list for faster wakeup

- Reworked measurement dialog - Communication stack optimized - New Help/FAQ link integrated - Some minor improvements and bug fixes

These issues have been fixed: - Better data update behavior for Sunny Home Manager 2.0 - Select device bugfix when using more than one sensor device - Fixed font bug in dashboard - Sensor web configuration is only visible for non SHM devices - Sensor name resolving for web configuration improved - Some minor bugfixes...

- Support of new measurement point "Grid Frequency" of Sunny Home Manager 2.3.x - Dark mode support - Some minor bug fixes

Small bug fixes and performance improvements.

This version includes the following changes: - iPhone X support - Support for SMA Sunny Home Manager 2.0 - Support for SMA Energy Meter 2.0 - Energy plotter with stacked power lines - Small improvement when using FRITZBOX router Do you like the Energy Meter App? A short review helps us a lot. Thank you! If you have any questions or comments please feel free to contact us: feedback@heiko-pruessing.de

We have made some small enhancements: • Adjustable multicast address: Now you can use any SMA Energy Meter that has a different multicast address than the default "239.12.255.254". • You can enter consumption and feed-in prices with 4 digits after decimal point

• iPad support • User interface redesign of the measuring/dashboard view • Using background mode for short breaks • Some minor bugfixes