Growlink
Produktivität
Kostenlos · Entwickelt für iPad. Nicht für macOS überprüft.
Take control of your grow from anywhere with the Growlink Mobile App. Seamlessly integrated with Growlink’s irrigation, climate, and nutrient delivery systems, the app offers a fast and intuitive experience—whether you're managing a single room or remotely operating multiple facilities.
mehr
Bewertungen & Rezensionen Local Network Mode - Now access your Growlink devices via the local network when cloud connectivity is unavailable (supported devices on updated firmware required).
3.0.1330 1. Apr.
- Modernized UI – A completely redesigned interface that simplifies workflows and makes managing your grow easier than ever.
- AI Grow Assistant – Your grower in a pocket to answer any questions about Growlink or general cultivation advice
- Portrait Dashboard Charts – Monitor your grow in any orientation with fully customizable time frames and presets.
- Flexible Data Views – View sensor data combined, grouped, or as individual points for deeper insights.
- Device Safety Locking – Prevent accidental changes with built-in safety locks for critical hardware.
- Same Powerful Automation – Set rules, schedules, sensor triggers, and timers to automate your entire grow process.
- Hardware Control – Manage devices, manual tasks, and setup with ease.
- Expanded Partner Integrations – Seamlessly connect partner hardware for an even more unified grow operation.
3.0.1218 26.08.2025
- Support for new device type "Flow Rate (Auxiliary)"
- Support for new/upcoming API integrations
- Updated device setup for LINKS products
- Fixes to ESM aggregate module assignment
- Misc. cleanup and fixes
- Support for MFA login challenges
- Fix for notes/photos in rooms
- Grouping for canopyLINK substrate readings
- Fix for Wi-Fi devices not detecting through hardware wizard
2.10.12 28.03.2025
- Support for new device type "Flow Rate (Auxiliary)"
- Support for new/upcoming API integrations
- Updated device setup for LINKS products
- Fixes to ESM aggregate module assignment
- Misc. cleanup and fixes
- Support for MFA login challenges
- Fix for notes/photos in rooms
- Grouping for canopyLINK substrate readings
- Fix for Wi-Fi devices not detecting through hardware wizard
2.10.11 25.03.2025
- Support for new device type "Flow Rate (Auxiliary)"
- Support for new/upcoming API integrations
- Updated device setup for LINKS products
- Fixes to ESM aggregate module assignment
- Misc. cleanup and fixes
- Support for MFA login challenges
- Fix for notes/photos in rooms
- Grouping for canopyLINK substrate readings
2.10.9 17.03.2025
- Support for new device type "Flow Rate (Auxiliary)"
- Support for new/upcoming API integrations
- Updated device setup for LINKS products
- Fixes to ESM aggregate module assignment
- Misc. cleanup and fixes
- Support for MFA login challenges
- Fix for notes/photos in rooms
- Grouping for canopyLINK substrate readings
2.10.4 05.03.2025
- Support for new device type "Flow Rate (Auxiliary)"
- Support for new/upcoming API integrations
- Updated device setup for LINKS products
- Fixes to ESM aggregate module assignment
- Misc. cleanup and fixes
- Support for MFA login challenges
2.10.0 19.02.2025
- Support for rooms w/ multiple controllers
- Support for integrations hubs
- Adjusted notification permission requests
- Fixed Sao Paolo time zone data
- Cleaned up sensor gauge layout
- Updated journal sensor sorting
- Fix for sensor dashboard sorting
- Fixes to PIC and Connect registration workflows
2.8.4 19.11.2024
- Support for rooms w/ multiple controllers
- Support for integrations hubs
- Adjusted notification permission requests
- Fixed Sao Paolo time zone data
- Cleaned up sensor gauge layout
- Updated journal sensor sorting
2.7.16 17.10.2024
- New analytics to measure user engagement
- Fixes and improvements to sensor alert push notifications
2.6.2 06.08.2024
- New analytics to measure user engagement
2.5.0 16.07.2024
- Added new hardware setup wizard with support for Agrowtek GCX registration
- Fix for crop steering programs not appearing on the rules page
2.4.5 17.06.2024
- Added new hardware setup wizard with support for Agrowtek GCX registration
2.4.3 12.06.2024
- Enabled support for manual task device overrides
- Allowed read-only users w/ manual tasks access to start tasks
2.3.5 24.04.2024
- Added support for applying firmware updates to Bluetooth controllers from the profile screen
- Fix for intermittent crashes
- Fix for incorrect threshold suffix shown on some sensor triggers
2.2.8 03.01.2024
- Added support for applying firmware updates to Bluetooth controllers from the profile screen
- Fix for intermittent crashes
2.2.6 11.12.2023
- Added support for applying firmware updates to Bluetooth controllers from the profile screen
2.2.5 04.12.2023
- Support for adjusting PAR readings on weather station module
- Fix for device lock button not appearing if first device module is hidden
- Fix for the refresh button appearing off screen when setting up a controller
2.1.3 23.10.2023
- Removed equipment filters for unit of measure preferences
- Minor clean-up to the lighting dashboard graph for conflicting schedules
- Restructured the connect to controller page for large font sizes
2.1.2 29.08.2023
- Configure substrate probes individually
- Ethernet controller registration
- Improvements to Wi-Fi controller setup
- Support for configuring customizable inputs
- Opt-in flags for adaptive light dimming triggers
- Per lighting device voltage configuration
- Added controller delete option on controller profile page
2.0.9 07.08.2023
- Migrated manual tasks to a dedicated tab
- Fixes to gauges dashboard
- Restored missing "seconds" option on some time fields
- Updated sensor trigger/alert UI for new digital input modules
- Styling updates and migration to newer platform frameworks
- Enabled proportional controls for ESM-2s and Metz AOs
- Enabled dosing pump configuration for Metz DOs
- Support for requesting account deletion
- Fix for app crash loading certain modules with no available data
1.21.20 01.12.2022
- Migrated manual tasks to a dedicated tab
- Fixes to gauges dashboard
- Restored missing "seconds" option on some time fields
- Updated sensor trigger/alert UI for new digital input modules
- Styling updates and migration to newer platform frameworks
- Enabled proportional controls for ESM-2s and Metz AOs
- Enabled dosing pump configuration for Metz DOs
- Support for requesting account deletion
1.21.19 30.11.2022
- Updates and fixes to recipe and rules management
- Enabled pH targeting on supported controllers
- Enabled crop steering with recipes on supported controllers
- Enabled alternate substrate configuration for TDR probes on PIC devices
- Support for partial motor control positions on supported controllers
- Fix for crashes in some regions
- Fix for time picker in iOS 15+
- Fixed missing conversions on dashboard gauges
- New controller setup workflow for refreshed device hardware
- Removed inactive manual tasks from dashboard
1.19.38 11.07.2022
- Updates and fixes to recipe and rules management
- Enabled pH targeting on supported controllers
- Enabled crop steering with recipes on supported controllers
- Enabled alternate substrate configuration for TDR probes on PIC devices
1.18.31 30.06.2022
- Fix to incorrect device states shown after change
- Fix to lighting visualization for some schedules
- Misc. error handling and stability improvements
- Fixes to unit of measure presentation for some sensors and devices
- Fix for device states not updating automatically after app resume
1.18.24 26.04.2022
Local Network Mode - Now access your Growlink devices via the local network when cloud connectivity is unavailable (supported devices on updated firmware required).
mehr Version 3.0.1330 1. Apr.
Mit dir verknüpfte Daten Die folgenden Daten werden möglicherweise erfasst und mit deiner Identität verknüpft:
Nicht mit dir verknüpfte Daten Die folgenden Daten werden zwar möglicherweise erfasst, aber nicht mit deiner Identität verknüpft:
