This version includes new firmware for both the CineTag and FRSLMB modules. CineTag v1.5.2 Features: - RED DSMC3 Camera Control (beta). Enable this feature under the settings menu after connecting to your CineTag. This feature may still be buggy, but give it a try! - Vastly improved power consumption. The CineTag should last for well over a month on a single charge now. FRS-LMB v1.2.8 Features: - Revised the filter detection algorithm to more accurately detect filters in the correct position. - Sometimes, the RFID module would freeze, completely disabling the filter reading. This has been corrected.

Added new firmware for the filter reading system for ARRI LMB 4x5 with the following changes: - Added better ghost filter handling within the filter detection algorithm - Found a bug that continuously drained the battery. The new battery life should be closer to 10-15 days depending on use.

This version includes new firmware for the CineTag as well as the FRS module for LMB4x5. CineTag Changes (V1.3.9): - Patched a bug that sometimes causes the battery bar to not update after fully charging FRS module for LMB Changes (V1.2.2): - Fixed a bug that prevented filter programming - Fixed a bug that prevented ghost filters from showing on the app or CineTag displays - Enabled screen switching for connected CineTags using the swap screen button on the app homepage

This version includes new CineTag firmware (v1.3.7) with the following features: - Refined how the saved filters work with the user buttons - Added the device nickname to the CineTag paper display - Fixed a bug that sometimes showed incorrect filter backlight colors - Fixed a few usability bugs

This release includes new firmware updates for the CineTag and FRS-Light devices. The CineTag firmware now includes more robust power handling to prevent device freezing. An issue was also fixed for the "Keep color on if plugged in" feature. The updated FRS-Light firmware is now compatible with CineTags! A few changes were also made to increase product reliability while entering and exiting low power modes. This should result in a much more stable and reliable experience.

This version includes support for the brand-new Light Widow CineTag! Additionally, this app includes the following new features: - A new CineGroup function has been developed to provide an easy way to link multiple CineTags together. The group is composed of one parent device and up to 5 children. - Multiple filters may now be loaded onto a CineTag device. The filters are then accessed by double-pressing one of the buttons on the side of the CineTag. This way, up to 30 filters may be pre-loaded onto a CineTag device and will be accessible without the use of a smart phone. - Squashed a few bugs that relate to the reliability and usability of the app. The app also includes new CineTag firmware, version 1.3.0 with the following features: - Support for CineGroup functionality - Support for the filters saved to the CineTag device. - Better UI handling and recovery after device reset. - LEDs behind the user buttons now only respond if a button is pushed. This is to eliminate any stray light potentially caused by the built in LEDs. - Fixed an issue when trying to program a favorite filter. - Fixed a few bugs that cause incorrect camera info to be displayed. - Developed better low-power modes to ensure battery life of up to 2 weeks on a single charge.

This version includes support for the brand-new Light Widow CineTag! Additionally, this app includes the following new features: - A new CineGroup function has been developed to provide an easy way to link multiple CineTags together. The group is composed of one parent device and up to 5 children. - Multiple filters may now be loaded onto a CineTag device. The filters are then accessed by double-pressing one of the buttons on the side of the CineTag. This way, up to 30 filters may be pre-loaded onto a CineTag device and will be accessible without the use of a smart phone. - Squashed a few bugs that relate to the reliability and usability of the app. The app also includes new CineTag firmware, version 1.3.0 with the following features: - Support for CineGroup functionality - Support for the filters saved to the CineTag device. - Better UI handling and recovery after device reset. - LEDs behind the user buttons now only respond if a button is pushed. This is to eliminate any stray light potentially caused by the built in LEDs. - Fixed a few bugs that cause incorrect camera info to be displayed. - Developed better low-power modes to ensure battery life of up to 2 weeks on a single charge.

This version includes support for the brand-new Light Widow CineTag! Additionally, this app includes the following new features: - A new CineGroup function has been developed to provide an easy way to link multiple CineTags together. The group is composed of one parent device and up to 5 children. - Multiple filters may now be loaded onto a CineTag device. The filters are then accessed by double-pressing one of the buttons on the side of the CineTag. This way, up to 30 filters may be pre-loaded onto a CineTag device and will be accessible without the use of a smart phone. - Squashed a few bugs that relate to the reliability and usability of the app. The app also includes new CineTag firmware, version 1.3.0 with the following features: - Support for CineGroup functionality - Support for the filters saved to the CineTag device. - Better UI handling and recovery after device reset. - LEDs behind the user buttons now only respond if a button is pushed. This is to eliminate any stray light potentially caused by the built in LEDs. - Fixed a few bugs that cause incorrect camera info to be displayed. - Developed better low-power modes to ensure battery life of up to 2 weeks on a single charge.

This version includes the following new features: - FRS-Light Firmware Update to version 3.4.2. - New ND stop offset for Polarizer filter types. This offset is added into the total stops calculation if enabled. - New "Low Light Mode" that keeps the backlight on for an hour at a time. Try it while shooting in low light conditions. - New backlight animation when pushing the front button. - Better battery charging stability. - Squashed a few usability bugs.

This version includes the following new features: - FRS-Light Firmware Update to version 3.4.2. - New ND stop offset for Polarizer filter types. This offset is added into the total stops calculation if enabled. - New "Low Light Mode" that keeps the backlight on for an hour at a time. Try it while shooting in low light conditions. - New backlight animation when pushing the front button. - Better battery charging stability. - Squashed a few usability bugs.