MultiTrack 7 is here. Thanks for waiting. This is the big one: a new audio engine, a new timeline, and a mixer that runs all the way to 9.1 surround. Your projects from earlier versions open in it. EVERY TRACK, FOR EVERYONE All 32 tracks are now part of the app, whatever you bought before. If you paid for extra tracks, that money comes back: open Options > Upgrades for free months of Unlock All Features, and a lower price on the one-time purchase that keeps it forever. NEW - MIDI tracks and clips, a piano roll with Draw mode, the MIDI Matrix, filter and transform chains, Network MIDI, and Standard MIDI Files with their tempo maps. - MIDI loop recording: each lap is a take of its own, new notes join the clip they land in, and tapping overlapping clips cycles through them. - MIDI 2.0 per-note pitch bend and pressure, each in its own lane with a curve on every segment. Drag a handle to bend it. - MIDI Panic, in the file menu, stops stuck notes on every MIDI destination. - Automation for volume, pan, sends, EQ, compressor, pitch, and Audio Unit parameters, plus MIDI CC lanes. - Tempo automation: draw ramps and curves, and audio, MIDI, and Ableton Link follow in real time. - Time signature changes anywhere on the ruler, as many as a song needs. - Time stretching and warp markers, and pitch shifting up to two octaves with formant preservation. - Surround and multichannel, from stereo to 9.1 and 4-16 channel pass-through, with a panner that keeps at least 24 dB between neighboring speakers. - Region crossfades: overlap two regions and the overlap is the crossfade. - A curve for every fade. Drag a fade handle up or down to bend it. - Recording latency calibration. Detect measures your mic, speaker, or interface with a short chirp, so takes land where you played them. - Ableton Link and outgoing MIDI are timed to the speaker, Bluetooth included. - Input monitoring stays silent on the one route that can only feed back, the built-in mic and speaker. New songs start with it on. - Takes that survive: a call, a lost interface, or a closed song ends the take and keeps it. Playback stops when headphones, AirPods, or a USB device disconnect. - Six plugins per chain on every track, bus, and the master, and four send busses. - Exports with real dither, and Normalize is now a choice, with a ceiling you set. - iCloud Drive projects, the Files app, drag and drop, and ZIP browsing. - Light, dark, and custom themes. - German, French, and Japanese throughout, and a help guide that works offline. - MultiTrack asks for the microphone when you arm a track, not at launch. - No account, no tracking, and no analytics or crash-reporting service. UNLOCK ALL FEATURES MIDI editing, time stretching and warp editing, and automation come with Unlock All Features: a subscription, or a one-time purchase. Everything else, pitch shifting included, is part of the app. REMOVED - Audiobus. A song saved with an Audiobus input opens with no input selected. - Wi-Fi mixdown and track downloads. Wi-Fi still carries projects and audio files; send finished mixes out through Files, AirDrop, or the share sheet. - The speaker button on plugin windows. AUv3 instruments are always heard; use Mute to silence a track. Found something? harmonicdog.com

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.6 Region editing now shows underlying regions through the region ghost, for easier alignment. Version 7.0 is still on it's way, stay tuned! Other recent features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser. • Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). • Allow dragging of AudioUnit windows outside of screen edges. • Adds sorting of AudioUnits in selection panels with most recently used at the top. • 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. • Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs. • Input Fader can expand up to a 32 channel VU Meter. • New Create Song panel with song name and bits/rates.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.5 Fixes crash introduced in last version on iOS 12 or lower. Maintenence release. Fixes issues with plugin initialization when switching audio hardware. Fixes an issue with the project converters when opening super old projects. This will be the last version supporting iOS 14 or lower. The next version (7.0) will support iOS 15 or higher only and will be a major update. Other recent features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser. • Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). • Allow dragging of AudioUnit windows outside of screen edges. • Adds sorting of AudioUnits in selection panels with most recently used at the top. • 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. • Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs. • Input Fader can expand up to a 32 channel VU Meter. • New Create Song panel with song name and bits/rates.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.4 Maintenence release. Fixes issues with plugin initialization when switching audio hardware. Fixes an issue with the project converters when opening super old projects. This will be the last version supporting iOS 14 or lower. The next version (7.0) will support iOS 15 or higher only and will be a major update. Other recent features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser. • Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). • Allow dragging of AudioUnit windows outside of screen edges. • Adds sorting of AudioUnits in selection panels with most recently used at the top. • 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. • Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs. • Input Fader can expand up to a 32 channel VU Meter. • New Create Song panel with song name and bits/rates.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.3 Improved UI look and feel, snapping, and Tooltips. Fixed some issues associated with Stem Mixdown. Adds dB markings to Large Fader VU Meters. Large Input Fader can expand up to a 32 channel VU Meter. New Create Song panel with song name and bits/rates. Adds a tooltip to the Large Pan Knob (-64 to +63). Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser. • Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). • Allow dragging of AudioUnit windows outside of screen edges. • Adds sorting of AudioUnits in selection panels with most recently used at the top. • 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. • Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.1 Adds dB markings to Large Fader VU Meters. Large Input Fader can expand up to a 32 channel VU Meter. New Create Song panel with song name and bits/rates. Puts a Measurement Mode toggle in the Options pane. Adds a tooltip to the Large Pan Knob (-64 to +63). Metronome Controller cleanup and rearrangement. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser. • Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). • Allow dragging of AudioUnit windows outside of screen edges. • Adds sorting of AudioUnits in selection panels with most recently used at the top. • 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. • Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3.1 Adds dB markings to Large Fader VU Meters. Large Input Fader can expand up to a 32 channel VU Meter. New Create Song panel with song name and bits/rates. Puts a Measurement Mode toggle in the Options pane. Adds a tooltip to the Large Pan Knob (-64 to +63). Metronome Controller cleanup and rearrangement. Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). Allow dragging of AudioUnit windows outside of screen edges. Adds sorting of AudioUnits in selection panels with most recently used at the top. 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.3 Allow reordering of track FX by dragging tabs (Compressor, EQ, and AudioUnit chain). Allow dragging of AudioUnit windows outside of screen edges. Adds sorting of AudioUnits in selection panels with most recently used at the top. 'Allow Portrait' toggle switch for iPhone in Settings.app (default is on), switch off to force landscape. Store last selected 'Ruler' and 'Time Display' metronome settings, as default for new songs. Fix: Error message for stem mixdown when running out of filespace. Fix: Waveform view maintains zoom level, when rotating device or changing screen size. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. • Track Duplicate feature. • Mute/Unmute per region. • iOS 14 ColorPicker for changing track color, with a wider range of colors. • Enable iOS Status Bar for iPad split view or slide over mode. • Added Bounce button to Audio Browser.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. Many more things. Version 6.2.8 Track Duplicate feature, use the Hotbox to make an exact duplicate of an entire track with all settings/plugins. Improved loop marker and ruler tracking, workarounds for the new iOS 15 invasive 3 Dot split view button. Fixed issues with multi-region paste, track text, Sender bubble, input monitoring/volume/peaks, latency, piano triggering, AUv3 instruments with inputBusses, Audiobus Senders, Render Timeouts, and general stability all around. Mute/Unmute per region. iOS 14 ColorPicker for changing track color, with a wider range of colors. Enable iOS Status Bar for iPad split screen or slide over mode. Stop following playhead when Hotbox is open. Added Bounce button to Audio Browser. Always launch tacked plugins when AudioUnit instantiated, like unmuting or toggling power. Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Allow Wi-Fi track download even if the track is muted. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), RoughRider3, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.7 Mute/unmute per region. Use the iOS 14 ColorPicker for changing track color, with a wider range of colors. Fix the silence bug when projects had exactly 32 tracks. Avoid circular dependencies with sidechain. Enable iOS Status Bar for iPad split screen or slide over mode. Fix the broken input monitor for IAA. Stop following playhead when Hotbox is open. Added Bounce button to Audio Browser. Render Timeout improvements, for specific AUv3's that improperly throw these when starting up. Always launch tacked plugins when AudioUnit instantiated, like unmuting or toggling power. Fixed audio glitches when editing regions during playback. Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.6 Fix the silence bug when projects had exactly 32 tracks. Avoid circular dependencies with sidechain. Enable iOS Status Bar for iPad split screen or slide over mode. Fix the broken input monitor for IAA. Fix the unmute when bouncing, introduced in last point update. Stop following playhead when Hotbox is open. Added Bounce button to Audio Browser. Render Timeout improvements, for specific AUv3's that improperly throw these when starting up. Always launch tacked plugins when AudioUnit instantiated, like unmuting or toggling power. Fixed audio glitches when editing regions during playback. Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Allow any non-frozen track (Pre FX tap) as sidechain source for any chain. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.5 Enable iOS Status Bar for iPad split screen or slide over mode. Fix the broken input monitor for IAA (was using the auSpeakered flag). Fix the unmute when bouncing, introduced in last point update. Stop following playhead when Hotbox is open. Added Bounce button to Audio Browser. Render Timeout improvements, for specific AUv3's that improperly throw these when starting up. Always launch tacked plugins when AudioUnit instantiated, like unmuting or toggling power. Fixed audio glitches when editing regions during playback. Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Allow any non-frozen track (Pre FX tap) as sidechain source for any chain. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.4 Added Bounce button to Audio Browser. Render Timeout improvements, for specific AUv3's that improperly throw these when starting up. Always launch tacked plugins when AudioUnit instantiated, like unmuting or toggling power. Fixed audio glitches when editing regions during playback. Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Allow any non-frozen track (Pre FX tap) as sidechain source for any chain. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Fixed the 'Track FX' option in the Wi-Fi track download. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.3 Addressed an issue affecting the VU meter of mono tracks. Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Allow any non-frozen track (Pre FX tap) as sidechain source for any chain. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Fixed the 'Track FX' option in the Wi-Fi track download. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.2 Avoid any circular sidechain references on tracks with other (Post FX tap) dependencies. Allow any non-frozen track (Pre FX tap) as sidechain source for any chain. Disallow freezing of tracks being used as (Pre FX tap) sidechain dependencies. Addressed an issue with the Music import on iPhone/iPod non-popover devices. Fixed the 'Track FX' option in the Wi-Fi track download. Allow Wi-Fi track download even if the track is muted. Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack.

Version 6.2 • Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Version 6.2.1 Workaround for an Apple bug that affects AUv3 plugins that try to send midi data on iOS 15. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack.

• Sidechain inputs for AudioUnit plugins. Use the 'SC' button on plugs that publish a sidechain input (or multiple input busses), like FabFilter (MB Pro, Timeless 3), Bleass Compressor, NYCompressor, or Blue Mangoo Multiband Compressor. Sidechain input can source from any other track, pre or post effects, including other tracks that also have sidechain effects. • Per-Region Volume. When editing a region, an additional Handle will control the volume (-45 to +12 dB) • Vertical dragging of Regions or multiple Regions. You ask for it, we deliver. • Tracks now allow mono or stereo regions on the same track, the VU meter will change channel count dynamically. • Separate 'Bounce' and 'Copy' buttons in the Hotbox. The Bounce button will mixdown all audio in selected regions and copy it to the Pasteboard, the Copy button will only copy Region data. • Realtime monitoring of editing/moving Regions, start/stop/fadein/fadeout/volume, during playback. • Undo/Redo of track deletion/creation/moving. Tracks will animate back to original position on Undo/Redo. • Improved Loop Marker adjustment, window will now autoscroll when dragging Loop Markers. • Wi-Fi web server now has options for toggling 'Track FX', 'Bus FX' and 'Master FX' for track downloads. • AUView now has 'Speaker' icon used to toggle the output. 'Input Monitor' still exists in the Menu which is for CoreAudio/IAA inputs. Many more things. Previous Features: • New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. • Tracks can be now be purchased in multiples of 8, up to a total of 32. • 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. • New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. • Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. • AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. • FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. • Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. • Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.1 Feature: Multi-channel wav export. When mixing down to Stems and Wav export is selected, the option to render into a single multi-channel wav file will be available. Tracks will be rendered as stems and packed into the Wav file in the order they appear in MultiTrack. Fixed an issue with frame layout when cold starting into splitscreen on iPad. Fixed an issue with piano keyboard having '3 note sticky behavior' after opening the iOS keyboard for typing. Fixed an issue that may have caused Stem normalization to have low volume level under specific conditions. Fixed an issue when dropping a stack of audio files onto MultiTrack from the Files app, where downloading from iCloud would cause the files to be out of order. Previous Features: FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) implemented. Added an 'Import' tab with Files and Music Import capabilities. Increased the vertical size of the Tab Control on horizontally constrained devices (iPhone in portrait mode or iPad in 1/3 or 1/4 splitscreen view). Added a scrolling 'bounce' to the Song Icon screen. In-app Help button added for specific app features, opens context sensitive help. (Currently the mixdown panel, some warning popups and the Wi-Fi server popup have the new help button). Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. Plugin size and position is now saved separately for portrait and landscape views, or any other view sizes (iPad in 1/3 view, etc). 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. Replaces the 'Use Bluetooth' menu option with the standard iOS Route Picker (now in the OUT panel) Adds animating arrows on the AUView resizing button, to help clarify that the button needs to be dragged to resize the plugin. Song/Folder archiving is now cancelable during the archiving process.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.10 FLAC (Free Lossless Audio Codec) and ALAC (Apple Lossless Audio Codec) for mixdown. Added an 'Import' tab with Files and Music Import capabilities. Made the Tab Control taller on horizontally constrained devices (iPhone in portrait mode or iPad in 1/3 or 1/4 splitscreen view). Added more in-app help buttons with links. Added a scrolling 'bounce' to the Song Icon screen. Fixed some text issues with Japanese and French localizations. Version 6.0.9 In-app Help button added for specific app features, opens context sensitive help. (Currently the mixdown panel, some warning popups and the Wi-Fi server popup have the new help button). FIX: Enable/Disable 'Export Loop Only' button when loop is enabled/disabled behind the Tab Control. FIX: Dismiss any Volume, Pan, and Buttons popups for a track, if the track was deleted quickly out from under the popup. Removal of SoundCloud. You can use the mixdown feature (Export), then use the SoundCloud app to upload the mixdown. Removal of Email. You can use the mixdown feature (Export), then use the Share button to send the mixdown to the Email app of your choice. Version 6.0.8 Fix a bug with AU selector where background panel would get dismissed if outside tapped point. Version 6.0.7 Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. Plugin size and position is now saved separately for portrait and landscape views, or any other view sizes (iPad in 1/3 view, etc). Fixed a latency issue with AU instruments/generators when a Bluetooth device was connected. Mixdowns, bounces, and track freezes with AU plugins are now filled precisely the same way as normal playback, so should have identical renderings. (Playhead will move across the screen while rendering). Fixed an issue when importing audio with more than 2 channels. Version 6.0.6 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. Longer song and folder names (up to 45 characters)

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.9 In-app Help button added for specific app features, opens context sensitive help. (Currently the mixdown panel, some warning popups and the Wi-Fi server popup have the new help button). FIX: Enable/Disable 'Export Loop Only' button when loop is enabled/disabled behind the Tab Control. FIX: Dismiss any Volume, Pan, and Buttons popups for a track, if the track was deleted quickly out from under the popup. Removal of SoundCloud. You can use the mixdown feature (Export), then use the SoundCloud app to upload the mixdown. Removal of Email. You can use the mixdown feature (Export), then use the Share button to send the mixdown to the Email app of your choice. Version 6.0.8 Fix a bug with AU selector where background panel would get dismissed if outside tapped point. Version 6.0.7 Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. Plugin size and position is now saved separately for portrait and landscape views, or any other view sizes (iPad in 1/3 view, etc). Fixed a latency issue with AU instruments/generators when a Bluetooth device was connected. Mixdowns, bounces, and track freezes with AU plugins are now filled precisely the same way as normal playback, so should have identical renderings. (Playhead will move across the screen while rendering). Fixed an issue when importing audio with more than 2 channels. Version 6.0.6 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. Longer song and folder names (up to 45 characters) Version 6.0.5 Replaces the 'Use Bluetooth' menu option with the standard iOS Route Picker (now in the OUT panel) FIX: Disable mute/solo/power buttons until the loading/unloading of AU chain is finished. FIX: The AU plugin icon spacing was wonky on smaller screens. FIX: Save the project even when the only change is a region rename.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.8 Fix a bug with AU selector where background panel would get dismissed if outside tapped point. Version 6.0.7 Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. Plugin size and position is now saved separately for portrait and landscape views, or any other view sizes (iPad in 1/3 view, etc). Fixed a latency issue with AU instruments/generators when a Bluetooth device was connected. Mixdowns, bounces, and track freezes with AU plugins are now filled precisely the same way as normal playback, so should have identical renderings. (Playhead will move across the screen while rendering). Fixed an issue when importing audio with more than 2 channels. Version 6.0.6 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. Longer song and folder names (up to 45 characters)

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.7 Pin button. On iPad, AU plugins and instruments now have a Pin button to keep the plugin on screen. When opening a song, all pinned plugins will restore their position, so you can get right back to work from where you left off. Plugin size and position is now saved separately for portrait and landscape views, or any other view sizes (iPad in 1/3 view, etc). Fixed a latency issue with AU instruments/generators when a Bluetooth device was connected. Mixdowns, bounces, and track freezes with AU plugins are now filled precisely the same way as normal playback, so should have identical renderings. (Playhead will move across the screen while rendering). Fixed an issue when importing audio with more than 2 channels.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.6 32 bit floating point project formats! Use the '32f' option (Gear icon on the Songs Screen) to create a project with the new format. Longer song and folder names (up to 45 characters) Version 6.0.5 Replaces the 'Use Bluetooth' menu option with the standard iOS Route Picker (now in the OUT panel) FIX: Disable mute/solo/power buttons until the loading/unloading of AU chain is finished. FIX: The AU plugin icon spacing was wonky on smaller screens. FIX: Save the project even when the only change is a region rename. Version 6.0.4 Adds animating arrows on the AUView resizing button, to help clarify that the button needs to be dragged to resize the plugin. Song/Folder archiving is now cancelable during the archiving process. FIX: Better default size for AUView plugins. FIX: Progress bar is now modal. Version 6.0.3 FIX: Some weirdness with the Delay effect. Version 6.0.2 FIX: Screen layout for devices with safety margins. Version 6.0.1 FIX: A crash bug when trying to send a song as email on specific devices. FIX: A rare crash bug when retrieving the plugin name from the AVAudioUnit. FIX: The Hotbox button size and distance on iPad was a bit out of wack. FIX: Save the project even when the only changes are track renaming. FIX: Defer system gestures on bottom edge only when AudioUnit instrument or midi keyboard is onscreen.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.5 Replaces the 'Use Bluetooth' menu option with the standard iOS Route Picker (now in the OUT panel) FIX: Disable mute/solo/power buttons until the loading/unloading of AU chain is finished. FIX: The AU plugin icon spacing was wonky on smaller screens. FIX: Save the project even when the only change is a region rename. Version 6.0.4 Adds animating arrows on the AUView resizing button, to help clarify that the button needs to be dragged to resize the plugin. Song/Folder archiving is now cancelable during the archiving process. FIX: Better default size for AUView plugins. FIX: Progress bar is now modal. Version 6.0.3 FIX: Some weirdness with the Delay effect. Version 6.0.2 FIX: Screen layout for devices with safety margins. Version 6.0.1 FIX: A crash bug when trying to send a song as email on specific devices. FIX: A rare crash bug when retrieving the plugin name from the AVAudioUnit. FIX: The Hotbox button size and distance on iPad was a bit out of wack. FIX: Save the project even when the only changes are track renaming. FIX: Defer system gestures on bottom edge only when AudioUnit instrument or midi keyboard is onscreen.

New low price! Basic MultiTrack now comes with 2 tracks and with all features enabled. If you bought MultiTrack before this version, you will of course retain your track counts and all previous purchases. Tracks can be now be purchased in multiples of 8, up to a total of 32. New midi piano keyboard controller for AudioUnit Music Devices or Instruments. With Pitchbend/modwheel sliders and scalable key widths. Automatic velocity and aftertouch on supported devices. New look, menus/controls/popups are a translucent blurred dark material. Mixdown stems as separate tracks into a folder, with normalize option. With Normalize on, tracks will be rendered as loud as possible before clipping. With normalize off, tracks will still be rendered as loud as possible before clipping, but will maintain their relative volume to other tracks. AudioUnit plugin view can be moved and resized, and remain onscreen. Supports multiple AU Instruments open at once on iPad. Extra FX bus added for a total of 2 FX busses. The large popup volume controls now have an easy to read VU Meter, and a Return To Zero dB button. AU/IAA plugins in the Effects Chain now have individual power buttons. AudioUnit icons on the tracks are now tappable, will open the Effects Chain popup for the track. Song Projects now store each of the tracks Armed state, for CoreAudio inputs, Music Devices and Instruments. Blue power dots on the Tab control to easily see which effects are on. Zipped archives can now contain multiple song projects, audio files, directories full of songs or audio files, etc. Animating play button on file player, indicates the current song position during file playback. The toolbar OUT button is now visible on screen widths of 375 points or better. Many more things. Version 6.0.4 Adds animating arrows on the AUView resizing button, to help clarify that the button needs to be dragged to resize the plugin. Song/Folder archiving is now cancelable during the archiving process. FIX: Better default size for AUView plugins. FIX: Progress bar is now modal. Version 6.0.3 FIX: Some weirdness with the Delay effect. Version 6.0.2 FIX: Screen layout for devices with safety margins. Version 6.0.1 FIX: A crash bug when trying to send a song as email on specific devices. FIX: A rare crash bug when retrieving the plugin name from the AVAudioUnit. FIX: The Hotbox button size and distance on iPad was a bit out of wack. FIX: Save the project even when the only changes are track renaming. FIX: Defer system gestures on bottom edge only when AudioUnit instrument or midi keyboard is onscreen.