Agent Manager
Business
Free · Designed for iPad. Not verified for macOS.
This app is for users of the Pervasive Telemetry IoT platform.
Agent Manager will communicate with the AgentG3 telemetry hardware using Bluetooth LE and perform the following operations:
- Install, uninstall or replace an AgentG3 at a new or existing Site
- Download stored samples and upload them to the Pervasive Telemetry Cloud
- Upload new settings and configuration to the AgentG3 from the Cloud
- Perform firmware updates if required
- Modify site settings and parameters
When the AgentG3 is configured as a pure data logger (no 4G modem) the Agent Manager app is required to download samples from the logger and to update any settings.
When the AgentG3 has a 4G modem, Agent Manager is used to install the AgentG3 and can also be used to as an additional communications path to the Pervasive Telemetry Cloud.
more - Don't update Agent firmware if the version is already the latest but FCS doesn't match
- Reduced the number of retries from 10 to 5 when syncing with Agent
- Added "add photo" button to Basic page
- Fixed occasional crash when reading voltages from Agent
1.61 Mar 19
- Added message for new Updating Firmware status from Agent
- Partial implementation of tower locations on map
- Send deivce ID with logs so seperate log files can be generated for each device
1.51 2024-03-19
- Support PM-QCP module (4 100mV shunt inputs)
- Calibrating 4 channels
- Display realtime voltages/currents
- Add ability to display a message for the currently selected site. (for example recommendation to replace Agent)
- Map shows updated AgentG3CP Testpoints pins in Green
- Improved UI for editing shunt resistance using presets instead or resistance value
- Added Repair View for PT Users
1.48 2023-08-16
Fixed a bug where sometimes 1 second sampling would not be triggered on the Agent when pressing the button
1.44 2023-03-21
- Enable split screen mode on iPads
- Basic View: Fixed an issue where if there are 2 sites nearby and one uninstalled logger, the uninstalled logger would be selected and the sites could not be selected
- Set correct Map pin colours for Testpoints and TRs for the new AgentG3s
- Timeout voltage display so it doesn't get stuck
1.43 2023-03-12
Support configs shared across companies
1.42 2023-02-16
- Fixed bug where the "Enter Defect" dialog would jump around on ipad
- The app will now tell the user when a new build is available
- Support SSO for company with 2 email domains
1.41 2023-02-06
- Basic View:
- Moved 4G modem status to a seperate line so it's always visible
- Added "Add Defect" button to report problems
- Added "4G Connect" button to force TCP connection
- Added Bonding status line (if company supports Bonding)
- Now displays an error message if it appears that the wrong type of Agent is installed at the location based on the config
- The voltages shown for CP Agents now varies based on what the config is logging. only shows relevant voltages
- Now displays the Supply voltage if it's a rechargeable AgentG3
- Added cancel button to install Agent dialog
- Display success/failure alert when a Force4G command is issued
- Detailed View:
- Moved 4G modem status to a seperate line so it's always visible
- Added Bonding status line (if company supports Bonding)
- The voltages shown for CP Agents now varies based on what the config is logging. only shows relevant voltages
- Now displays the Supply voltage if it's a rechargeable AgentG3
- Display success/failure alert when a Force4G command is issued
- Added "Restart Agent" and "Force 4G Connection" to the actions menu
- Logger Info page now displays the Power Supply type
- Site Settings View:
- Locale can now be changed
- Bonding can be setup (if company supports Bonding)
- Added buttons to start 1Hz to 10Hz sampling
- Fixed a bug where the displayed voltage would be inverted in CPV2 Agents
- Added a new option to Settings to limit the downloads to 8 Days (needed now that loggers have more memory and can store up to 1 month of data)
- Fixed a bug where sometimes the calibration data would not be sent to the server after a successful calibration
- Fixed a bug where if a change was made (e.g installing a logger) while the site database download was happening, then that change would be lost once the download completed. This resulted in the install being "forgotten" and have to be redone.
1.40 2022-12-23
- When uploading a photo it now asks for a name to use
- Support new AgentG3 V3 CP Loggers
- Support downloading 10hz samples
- CP voltage is no longer inverted
- Logger Info view now displays information about both CP and generic samples
- Filter config list down to ones that are applicable for the Agent Type
- Added search field to map view
- Added 'Delete Site' option in the Actions menu
- Fixed inverted voltages being displayed for CP Agents
1.35 2022-08-22
- When uploading a photo it now asks for a name to use
- Support new AgentG3 V3 CP Loggers
- Support downloading 10hz samples
- CP voltage is no longer inverted
- Logger Info view now displays information about both CP and generic samples
- Filter config list down to ones that are applicable for the Agent Type
- Added search field to map view
- Added 'Delete Site' option in the Actions menu
1.34 2022-08-13
- When uploading a photo it now asks for a name to use
- Support new AgentG3 V3 CP Loggers
- Support downloading 10hz samples
- CP voltage is no longer inverted
- Logger Info view now displays information about both CP and generic samples
- Filter config list down to ones that are applicable for the Agent Type
- Added search field to map view
1.32 2022-08-11
Fixed a bug performing a firmware update of the Agent in some rare cases
1.26 2022-04-04
Added support for AC RMS reading in latest AgentG3 hardware
If Bluetooth is inactive App is now usable, a clickable message is displayed
Added support for Active Directory login for enterprise customers
Compressed and encrytped User database
A success or failure dialog will now be shown after forcing a 4G connection to the Server
Fix for bug where invalid log files can be sent to the Server
1.25 2022-02-18
- Added the ability to take a site photo and upload as a Site attachment
- Fixed bug where you couldn't set a variable to 0 if it was set to the default value in the config
- Inverted the +/-10V input display to match logged data
1.20 2021-05-13
- New icons on smaller displays for AgentG3
- Basic view now connects to logger when selected, displays voltages for CP Agents
- Added Spot check and Add Test Point buttons to the AgentG3 section if the company supports it
- Added CPS Settings if company supports it
- Install logger option now brings up a config picker if there are less than 8 configs
- For AgentG3 the signal strength meter is now showing LTE signal instead of BTLE
- Reads calibration information from Agent after calibration and sends to server for record keeping
- Add Note dialog now supports multiple lines of text
1.19 2021-04-07
Critical fix for crash when downloading a large number of samples
1.16 2021-03-30
- Tweaks to Basic View UI
- Fixed bug where sites flagged as being Cathodic Protection sites would not be displayed if the company didn't have Support for CP Loggers
- Added support for combined AgentG3/CPLogger firmware Bluetooth changes
1.15 2021-02-12
Support 10V and 100V isolated CP PM modules
Support firmware builds >362
1.14 2020-12-26
Support for CP personality modules with Isolated 100mv inputs
1.12 2020-09-23
Changed install page to allow config to be selected for CP Loggers
1.11 2020-08-20
Fixed crash on logger details page for Jemena Logger V2 due to recent change the voltage display
1.9 2020-06-13
-Support downloading debug logs from AgentG3
- Fixed bug with selecting the first locale in the locale picker
1.8 2020-06-09
- Locale support when creating new Sites
- Minor fixes
1.7 2020-05-28
Multiple company support for users
Rights filtering now done at the server for improved security
Minor fixes
1.6 2020-04-19
Dark Mode support
1.5 2020-02-01
- Don't update Agent firmware if the version is already the latest but FCS doesn't match
- Reduced the number of retries from 10 to 5 when syncing with Agent
- Added "add photo" button to Basic page
- Fixed occasional crash when reading voltages from Agent
more Version 1.61 Mar 19
Data Linked to You The following data may be collected and linked to your identity:
