TslaMirror
App Mirroring for Car
Free · In-App Purchases · Designed for iPad. Not verified for macOS.
One-week free trial.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
One-week free trial.
TslaMirror is an app designed to mirror your iPhone apps to your Tesla’s built-in browser.
- Supported apps include Waze, Google Maps, Apple Maps, YouTube, TikTok, Plex, and more.
- DRM-protected apps, including but not limited to Netflix, Apple TV, YouTube TV, Amazon Prime Video, and Hulu, are not supported. Some DRM-protected apps may block video mirroring, resulting in a black screen in the Tesla browser.
Instructions for the Tesla built-in browser:
1. If possible, update your Tesla’s infotainment system to the most recent version.
2. Make sure the vehicle is PARKED (0 mph / 0 km/h).
3. Connect your Tesla to your iPhone Personal Hotspot (cellular data required). MCU2 or MCU3 hardware is required: available on Model 3 and Model Y, Model S built after March 2018, Model X built after March 2018, or vehicles upgraded from MCU1 to MCU2/3.
4. Ensure the iPhone is not in Low Power Mode. Launch the TslaMirror app and toggle on “Proxy.”
5. Tap “Start,” then select “Start Broadcast” to begin screen broadcast.
6. In your Tesla’s built-in browser, go to https://TslaMirror.com
7. Pinch in the browser to zoom in or out.
8. In H.264/H.265 mode, lossless audio playback is supported in the browser.
9. In MJPEG mode, only video is mirrored. For audio, use a Bluetooth connection from your iPhone to the Tesla’s speakers.
10. Keep your iPhone unlocked; due to Screen Broadcast API limitations, locking the screen stops casting and requires restarting the broadcast.
Key Features
1. No additional internet traffic is used for mirroring; traffic stays on the iPhone’s Personal Hotspot. However, while the Tesla is connected to the hotspot, the vehicle may use your cellular data for its own internet access.
2. Private: the screencast is only available to devices connected to the iPhone Personal Hotspot Wi-Fi network.
3. A 5 GHz Personal Hotspot (supported from the iPhone 12 series) is highly recommended. Do not enable “Maximize Compatibility” on iPhone 12 models; enabling it forces a 2.4 GHz hotspot.
4. H.264/H.265 mirroring recommendations:
- MCU3 (AMD Ryzen): H.265 mode with 720p@60 fps recommended, as 1080p requires higher bandwidth. MCU3 supports up to 1080p@60fps (H.264 and H.265).
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
- MCU2 (Intel Atom): H.264 mode with 540p@30fps recommended only for very old Tesla in-car system.
FAQ
1. This is not CarPlay.
2. iOS apps that use the AVPlayer framework (e.g., Apple Music, Netflix) are not supported.
3. Netflix is not supported.
Privacy/Security Notice: This app does not collect usage statistics, personal information, or analytics. On iOS 13 and later, it uses Location Services only to read the Wi-Fi network name (SSID). Location data is never stored or collected. No information is stored by us.
Disclaimer: This software and documentation are not affiliated with or endorsed by Tesla, Inc. Use at your own risk. We do not guarantee proper functioning. Some features require specific vehicle options (e.g., MCU2 or newer). The app uses interfaces similar to those used by official Tesla apps, but you are responsible for any changes to your car resulting from use. Use requires the vehicle’s built-in browser. We are not liable for any damages to you, your car, or any other property in conjunction with the use of this app.
Warning and Legal Disclaimer: Use only while PARKED (0 mph / 0 km/h). Local laws may restrict the use of a built-in web browser in a vehicle.
Terms of Use (EULA): https://teslamirror.com/terms.html
Privacy Policy: https://teslamirror.com/privacy.html
more Apple should not allow such developers to even allow just a scam to make money should sue Apple for allowing such developers
Developer Response We have Tesla 3 and Tesla Y to test the app. It works well for us. Please contact TeslaMirror@hustmobile.com for support with details. FAQ site: https://teslamirror.com/faq.html App support Youtube channel: https://www.youtube.com/@teslamirrorsupport4826
Apple should not allow such developers to even allow just a scam to make money should sue Apple for allowing such developers
We have Tesla 3 and Tesla Y to test the app. It works well for us. Please contact TeslaMirror@hustmobile.com for support with details. FAQ site: https://teslamirror.com/faq.html App support Youtube channel: https://www.youtube.com/@teslamirrorsupport4826
Was hopeful but the video won’t play. Plays fine on my iPhone but won’t actually load and show on the Tesla screen. Only gives the buffering symbol. Super disappointed.
Developer Response iOS apps that use the AVPlayer framework cannot be supported, such as the Apple Music app and Netflix app. For the Apple Music app, although the screen can be streamed to the browser, the audio part will be muted during the Screen Broadcast. Youtube app is supported. Thanks.
Was hopeful but the video won’t play. Plays fine on my iPhone but won’t actually load and show on the Tesla screen. Only gives the buffering symbol. Super disappointed.
iOS apps that use the AVPlayer framework cannot be supported, such as the Apple Music app and Netflix app. For the Apple Music app, although the screen can be streamed to the browser, the audio part will be muted during the Screen Broadcast. Youtube app is supported. Thanks.
I wanted it to work, but it connects and when going to the Home Screen it freezes up. Maybe an update will be released to fix it but for now, I can’t use it.
Developer Response a. Check the VPN setting, iOS --> Settings --> VPN ---> TeslaMirror, make sure it is connected during the app runningb. Check the Location related settings.Please note, TeslaMirror App needs the correct Location Services access right.###1 The iOS system "Location Services" must be "On". (iOS --> Settings --> Privacy --> "Location Services", turn on it)###2 The TeslaMirror App Location Services access option can be either "While Using the App" or "Always" (iOS --> Settings --> Privacy --> "Location Services", turn on it ---> TeslaMirror, select the access option) This application does use Location services to access Wi-Fi access point network name on iOS 13 or later. Location data is not stored or collected at any point. No information is stored by our company. However, if the iOS system Location Services is not "On", or the Location access for TeslaMirror App is incorrect. The TeslaMirror App will not function correctly.c. Make sure the Tesla car is connected to the iPhone's personal hotspotd. Details steps https://teslamirror.com/faq.html
I wanted it to work, but it connects and when going to the Home Screen it freezes up. Maybe an update will be released to fix it but for now, I can’t use it.
a. Check the VPN setting, iOS --> Settings --> VPN ---> TeslaMirror, make sure it is connected during the app runningb. Check the Location related settings.Please note, TeslaMirror App needs the correct Location Services access right.###1 The iOS system "Location Services" must be "On". (iOS --> Settings --> Privacy --> "Location Services", turn on it)###2 The TeslaMirror App Location Services access option can be either "While Using the App" or "Always" (iOS --> Settings --> Privacy --> "Location Services", turn on it ---> TeslaMirror, select the access option) This application does use Location services to access Wi-Fi access point network name on iOS 13 or later. Location data is not stored or collected at any point. No information is stored by our company. However, if the iOS system Location Services is not "On", or the Location access for TeslaMirror App is incorrect. The TeslaMirror App will not function correctly.c. Make sure the Tesla car is connected to the iPhone's personal hotspotd. Details steps https://teslamirror.com/faq.html
The screen freezes immediately as you put the Tesla in “Drive”. No instructions as to how to get the Tesla screen to mirror the Google Maps directions / phone screen. I do not recommend wasting your money on this app.
Developer Response With the release of the 2021.24 update Tesla addressed this issue by giving users an option to keep WiFi on when the car shifts into gear. By default the car will still turn off WiFi when put into Drive or Reverse, but if you prefer, you can have your car remain connected to certain WiFi networks after switching to drive.To use "Remain Connected While in Drive," tap on the WiFi icon and go to WiFi Settings. Choose the WiFi network you'd like to remain connected to while in drive. Then turn on the 'Remain Connected in Drive' option.For older Tesla version, please check the following steps.By Tesla's design, when the Tesla car changes from Park mode to Drivemode. The Wi-Fi connection of Tesla cars will be disconnected.The steps to use TeslaMirror while driving:1 Park the Tesla car2 Change Tesla car to Drive mode, although it is parked3 Connect the Tesla car to the phone's hotspot. Yes, even in Drivemode. The Tesla car can connect to the phone's hotspot too.4 Sometimes, there is an issue on hotspot connection.Restarting bothsides maybe helps.5 On the phone, turn off the phone hotspot, thenturn on it back6 On the Tesla car, turn off the Wi-Fi connection, then turn on itback to find the phone's hotspot again.7 Please note sometimes the Tesla Wi-Fi connection setting is turnedoff in Drive mode. You need to turn it on manually.8 After the Tesla car connects to the phone's hotspot. FollowTeslaMirror App's other instructions make the mirroring work9 Drive safeThanks.
The screen freezes immediately as you put the Tesla in “Drive”. No instructions as to how to get the Tesla screen to mirror the Google Maps directions / phone screen. I do not recommend wasting your money on this app.
With the release of the 2021.24 update Tesla addressed this issue by giving users an option to keep WiFi on when the car shifts into gear. By default the car will still turn off WiFi when put into Drive or Reverse, but if you prefer, you can have your car remain connected to certain WiFi networks after switching to drive.To use "Remain Connected While in Drive," tap on the WiFi icon and go to WiFi Settings. Choose the WiFi network you'd like to remain connected to while in drive. Then turn on the 'Remain Connected in Drive' option.For older Tesla version, please check the following steps.By Tesla's design, when the Tesla car changes from Park mode to Drivemode. The Wi-Fi connection of Tesla cars will be disconnected.The steps to use TeslaMirror while driving:1 Park the Tesla car2 Change Tesla car to Drive mode, although it is parked3 Connect the Tesla car to the phone's hotspot. Yes, even in Drivemode. The Tesla car can connect to the phone's hotspot too.4 Sometimes, there is an issue on hotspot connection.Restarting bothsides maybe helps.5 On the phone, turn off the phone hotspot, thenturn on it back6 On the Tesla car, turn off the Wi-Fi connection, then turn on itback to find the phone's hotspot again.7 Please note sometimes the Tesla Wi-Fi connection setting is turnedoff in Drive mode. You need to turn it on manually.8 After the Tesla car connects to the phone's hotspot. FollowTeslaMirror App's other instructions make the mirroring work9 Drive safeThanks.
9.64:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.64 20 hrs ago
9.63:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.63 Jun 26
9.62:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.62 May 27
9.61:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
- Supported apps include Waze, Google Maps, Apple Maps, YouTube, TikTok, Plex, and more.
- DRM-protected apps, including but not limited to Netflix, Apple TV, YouTube TV, Amazon Prime Video, and Hulu, are not supported. Some DRM-protected apps may block video mirroring, resulting in a black screen in the Tesla browser.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.61 May 18
9.60:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.60 Apr 22
9.59:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.59 Apr 20
9.58:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.58 Mar 18
9.57:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.57 Feb 13
9.56:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.56 Feb 7
9.55:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.55 Jan 20
9.54:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.54 Jan 2
9.53:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.53 2025-12-24
9.52:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.52 2025-12-02
9.51:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.51 2025-12-01
9.50:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.50 2025-11-28
9.25:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.25 2025-11-23
9.24:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.24 2025-11-18
9.23:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.23 2025-11-12
9.22:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.22 2025-11-05
9.21:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.21 2025-11-02
9.20:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.20 2025-10-22
9.09:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.09 2025-10-20
9.08:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.08 2025-10-16
9.07:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.07 2025-10-13
9.06:
- Improved video quality with the newly added H.265 mirroring mode. H.265 delivers the best video quality.
- On the browser side, H.265 playback is supported only on MCU3 or newer hardware.
- Tap the Settings button in the top-left corner → “Mirroring mode” to select the desired mode.
- H.264 is the default option. If your browser runs on MCU3 or higher-performance hardware, we recommend choosing H.265.
- On MCU3 browsers, H.265 playback performance at 1080p@60fps is comparable to that of H.264.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
9.06 2025-10-10
9.64:
- Performance improvements.
- For Tesla in-car system software version 2025.38.11 and later, H.265 mirroring is now recommended for both MCU2 and MCU3.
9.25:
- Added H.265 mirroring mode for improved video quality.
- H.265 playback is supported on all MCU3 vehicles, and on MCU2 vehicles running Tesla software 2025.38.11 or later.
- To switch modes, tap the Settings button in the top-right corner → “Mirroring mode”.
- H.264 remains the default. On MCU3 (and supported MCU2 vehicles), H.265 is recommended.
- On MCU3, H.265 enables smooth playback at 1080p@60 fps.
- Resolution and frame-rate settings for the H.265/H.264 modes depend on your vehicle’s performance. For older Tesla models, use lower settings; for newer models, increase them gradually to suit your needs.
8.07:
Siri Shortcuts support: Start Mirroring, Stop Mirroring, Start Proxy, Stop Proxy.
8.06:
- Enhanced H.264 performance on MCU3 (AMD Ryzen). MCU3 now supports up to 1080p@60fps.
- MCU3: 720p@60fps is recommended, as 1080p requires higher network bandwidth.
- MCU2 (Intel Atom): 540p@30fps is recommended.
7.06:
- MCU1 (NVIDIA Tegra 3): Due to hardware limitations, this app is not recommended for use on MCU1 devices. We appreciate your understanding.
7.00:
After careful investigation, it appears that the recent Tesla 2025.8.4 software update may have inadvertently impacted support for H.264 video streaming.
- The updated H.264 mode is now compatible with Tesla’s 2025.8.4 software.
- Due to limitations introduced in Tesla 2025.8.4, video playback performance in the new H.264 mode may be somewhat reduced compared with previous versions.
- To achieve optimal streaming performance, consider lowering your “Resolution” and “Frames per second” settings. You can adjust these by tapping the Settings button in the top-left corner of the app.
- To ensure the Tesla browser uses the latest version of a webpage, clear the vehicle’s browser data (as you would on a computer or phone) via Controls > Service > Clear Browser Data.
Thank you for your understanding and patience.
6.00:
- Starting with version 6.00, the audio transmission method has been completely updated and is no longer compatible with version 4.00. Tesla software versions 2024.45.32.1 and later no longer support the old method.
- The new audio transmission method is comparable to Bluetooth audio and supports lossless audio.
- Lossless audio specs: 44.1 kHz, stereo, 16-bit (CD quality). This is typically much better than Bluetooth or low-bitrate streaming audio.
- These specs reflect the highest recording quality supported by iPhone. For best results, use music apps configured for lossless or higher-quality audio.
- Lossless audio transmission is available only in H.264 mode, which includes a “Lossless Audio” option enabled by default that controls audio transmission to the browser.
- Audio transmission depends on DRM restrictions set by third-party apps. If a third-party app allows screen recording and its audio is DRM-free, it can be transmitted normally.
- To play audio in the browser, initial manual interaction is required (tap the audio button in the top-left corner). The button hides automatically after 30 seconds and reappears when the screen is touched.
- During prolonged audio playback, latency may gradually increase. Tap the audio button in the top-left corner to restart audio and minimize latency.
- For optimal transmission performance, we recommend using a 5G or 4G cellular signal along with a 5 GHz iPhone Wi-Fi hotspot (cellular signal and Wi-Fi frequency are separate parameters).
3.00:
- Added support for the new H.264 mode.
more Version 9.64 20 hrs ago
Data Not Collected The developer does not collect any data from this app.
