Improvement: LiDAR (Beta): Undo cupboards, wardrobes, fireplaces and service channels added from the 2D preview Improvement: LiDAR (Beta): Check unusual room heights before preview and guide scanning of wall tops and bottoms Improvement: Clearer navigation buttons on finished plans and output menus, with a simpler finished-plan header Improvement: LiDAR (Beta): Use observed door panels to make educated guesses about single-door swing and hinge side Improvement: LiDAR (Beta): Review a clearly captured small room from its connecting doorway when its entrance cannot be scanned from inside Improvement: LiDAR (Beta): More room for the plan preview with Copy, Transfer and Delete buttons arranged together when space allows Improvement: LiDAR (Beta): See and change the survey type before choosing how to draw your first room Improvement: LiDAR (Beta): Copy EPC settings from the previous window while keeping each window's measurements New: Choose Retrofit as a survey type and use the RdSAP10 completion checks Fix: LiDAR (Beta): Check unusual room heights without blocking normal rooms with low eaves or sloping ceilings Fix: LiDAR (Beta): Keep cupboards and their doors aligned with the room and fit cupboards to the scanned width Fix: Keep automatic room names readable when a small wall step leaves too little space for the label Fix: Prevent unwanted diagonal walls in EPC views and plan images after moving a nearby wall Fix: LiDAR (Beta): Edit compass direction on copies of LiDAR plans. Flipping or rotating clears the compass so you can add it again. Fix: LiDAR (Beta): Retain measured tapered room shapes when a rectangular adjustment would distort their wall lengths Fix: Keep delayed save and preview replies with the correct plan, and allow failed previews to be retried Fix: Style and output size dialogs open reliably from the iPad plan preview Fix: LiDAR (Beta): Keep single-door swing and hinge displays consistent between AR and the 2D plan Fix: Keep manually positioned room measurements stable when reopening or refreshing a plan Fix: Keep the bottom editor toolbar usable on narrow screens such as iPhone in portrait Fix: Clearer plan previews when opening a plan in portrait Fix: LiDAR (Beta): Improve confirmation of adjoining rooms with a small step beside the doorway while keeping their end walls aligned Fix: LiDAR (Beta): Prevent accepting invalid overlapping room outlines, including rooms with inferred stair hints Fix: Keep PlanVault search feedback beside the search field and prevent older searches from replacing the current results and match count Fix: LiDAR (Beta): Keep a previously scanned corner when a small room's wall shortens during scanning Fix: LiDAR (Beta): Avoid premature Review instructions while a room still needs scanning Fix: LiDAR (Beta): Finish scans when a small connecting room is scanned after the adjoining rooms Fix: LiDAR (Beta): Fit suggested cupboards without blocking adjoining rooms or losing accepted scans

Improvement: LiDAR (Beta): Offer a scanner restart when looking around the first room detects no surfaces Improvement: LiDAR (Beta): Faster editing and undo in plans created from large scans Fix: LiDAR (Beta): Keep the confirmation button and arrow instructions in sync when opening guidance returns Fix: LiDAR (Beta): Keep explanations for items that could not be added centred above the mini-plan, with the add-items hint hidden while they are shown Fix: LiDAR (Beta): Preserve short wall returns when confirming rooms Fix: Preserve saved account settings when they are temporarily unavailable during startup Fix: Keep automatic room dimensions stable when saving and reopening legacy and recovered plans Fix: Recover some saved plans that previously failed to open Fix: Open autosaved plans containing split straight walls without changing their room shapes Fix: Allow wall moves near existing short segments while preventing those segments becoming smaller Fix: LiDAR (Beta): Keep correctly aligned walls in place when joining nearby rooms Fix: Prevent an error when dragging walls near angled rooms Fix: Keep window EPC data available after moving walls or corners Fix: Hide marketing square-area groups from the floor summary in EPC view Fix: In BER mode, room-in-roof walls can be excluded or assigned to Alternative wall 1 or Alternative wall 2. Fix: LiDAR (Beta): Keep room scanning available after walking partway up existing stairs and returning Fix: LiDAR (Beta): Avoid an unnecessary room rescan when a later doorway adjustment would make rooms overlap Fix: LiDAR (Beta): Preserve valid short wall returns when finishing an accepted room Fix: LiDAR (Beta): Keep adjoining room doorways usable when a cupboard has been added to the connecting wall Fix: LiDAR (Beta): Remove a mistaken cupboard when it blocks the connection to an adjoining room Fix: LiDAR (Beta): Improve room alignment when neighbouring wall positions differ slightly Fix: LiDAR (Beta): Improve adjoining room confirmation when a short wall return is beside the entrance Fix: LiDAR (Beta): Correct sideways placement of adjoining rooms without stretching their walls

Improvement: LiDAR (Beta): Offer a reversible way to close persistent wall gaps while scanning Improvement: LiDAR (Beta): Keep scanned rooms when a connecting room was skipped, then connect them before finishing the plan Improvement: LiDAR (Beta): Align Add note and Room Title buttons and hide unused camera controls Improvement: LiDAR (Beta): Door editing hints disappear after eight seconds and stop after three appearances or once used Improvement: LiDAR (Beta): Reduce repeated guidance on difficult interior wall ends while keeping normal room checks Fix: LiDAR (Beta): Offer safe tracking recovery if the camera stops after accepting a room, keeping accepted rooms and completed measurements Fix: LiDAR (Beta): Offer a rescan when the first room's review asks you to move back inside, with clearer guidance about which room to return to Fix: LiDAR (Beta): Discard an unaccepted room or finish without it after a doorway rescan, keeping accepted rooms Fix: LiDAR (Beta): Recognise continued scanning of a difficult wall end even when its position stays steady Fix: LiDAR (Beta): Allow room review when a wide opening shares its wall with both sides of the room outline Fix: LiDAR (Beta): Keep the screen awake while scanning Fix: LiDAR (Beta): Keep the original room when a proposed split would prevent the scan from finishing Fix: LiDAR (Beta): Keep stepped room outlines from reversing beside previously scanned rooms Fix: LiDAR (Beta): Better recovery when an adjoining room reveals a step beside a landing Fix: LiDAR (Beta): Keep scanning guidance clear without covering the room preview Fix: LiDAR (Beta): Explain where to look when room confirmation needs more scanning, and keep disabled controls readable Fix: LiDAR (Beta): Recognise bay windows with different side angles more reliably Fix: LiDAR (Beta): Recognise closed room outlines containing multiple short wall returns Fix: LiDAR (Beta): Keep upstairs landing outlines intact after arriving from stairs below Fix: LiDAR (Beta): Complete missing floor space beside stairs when nearby rooms have angled walls Fix: LiDAR (Beta): Close suitable small corner gaps with a rectangular return Fix: LiDAR (Beta): Offer to close suitable wall gaps when scanning adjoining rooms Fix: LiDAR (Beta): Keep a valid stair boundary when scanning reveals a gap farther upstairs Fix: LiDAR (Beta): Keep new rooms aligned with adjoining rooms when earlier walls have been adjusted Fix: LiDAR (Beta): Recover connected rooms with a measured recess beside the entrance without requiring a rescan Fix: LiDAR (Beta): Prevent an uncertain camera height from switching to a room on the wrong floor Fix: LiDAR (Beta): Allow small rooms while retaining checks against false room divisions Fix: LiDAR (Beta): Allow supported stair cuts in small hallsFix: Small enclosed gaps fill correctly while editing plans. Fix: Older plans open with the correct room boundaries and standard wall thicknesses Fix: Keep the plan preview available to retry when a plan download fails Fix: Keep the open plan available when an account check requires signing in again Fix: Preserve walls still used by the plan when removing wall splits Fix: Splitting a previously joined wall could close the app Fix: Prevent a plan closing unexpectedly when flipped horizontally. Fix: Dragging a highlighted wall could close PlanUp in plans with adjoining rooms Fix: Prevent a crash when drawing a small room across an existing room entrance Fix: Recover plans after an interrupted edit without blocking startup Fix: Prevent a crash after dismissing an unsuccessful plan recovery Fix: Keep PlanUp usable when a recovery file cannot be opened Fix: Save plans offline sooner when an online save stops responding

Improvement: Show floor areas to two decimal places in EPC plans Fix: LiDAR (Beta): Reduce unnecessary Review prompts for unchanged walls Fix: LiDAR (Beta): Keep the preview open for small refinements and update opening sizes dynamically Fix: LiDAR (Beta): Reduce repeat reviews caused by small wall and connecting-doorway measurement refinements Fix: LiDAR (Beta): Keep confirmed rooms and doorway gaps in place when connecting another room Fix: LiDAR (Beta): More reliable room completion when straight walls are split into sections or opposing wall returns are detected

Improvement: Show numbers being entered in a compact, subtle label on the plan Fix: LiDAR (Beta): Recover adjoining rooms using the correct doorway wall Fix: LiDAR (Beta): Keep adjoining rooms connected when scanning through doors in a divided room Fix: LiDAR (Beta): Keep a complete landing outline when scanning also detects walls through doorways Fix: LiDAR (Beta): Keep adjoining rooms with stepped walls clear of rooms already accepted Fix: LiDAR (Beta): Preserve an adjoining room's entrance when simplifying its scanned walls Fix: Keep the compass clear of rooms when drawing or editing the plan Fix: Rooms added with the green plus fit enclosed gaps without distorting adjoining rooms Fix: Open saved plans whose shared wall sections need recalculating Fix: Repair tiny alignment errors in measured walls when opening a plan Fix: LiDAR (Beta): Recover rooms linked to the wrong doorway when the scan identifies one clear alternative Fix: LiDAR (Beta): Keep clear wall gaps beside short doorway returns when adding a room

Improvement: LiDAR (Beta): Finish rooms with supported early stairwell boundaries, shown with a dashed line and fading stairs Improvement: LiDAR (Beta): Fill supported gaps around early stairwell cuts after scanning the stairs Improvement: LiDAR (Beta): Update doors and windows in the room preview without interrupting review when the room shape stays the same Improvement: LiDAR (Beta): Set the front of the house when finishing every scan, without selecting a front wall during scanning Improvement: Account, plan-opening and editor dialogs fit portrait screens, with a native plan preview and output settings Improvement: Clearer portrait dialogs, colour controls and plan browsing New: BER survey progress indicators for compass orientation, room heights and window glazing Fix: LiDAR (Beta): Allow upside-down portrait when scanning on iPad Fix: LiDAR (Beta): Ask for a fresh review when room measurements change before confirmation Fix: LiDAR (Beta): Stop asking you to scan above stairs when an early stair cut has already completed that boundary Fix: LiDAR (Beta): Keep stairs and their landing attached to the room they start from when climbing above a neighbouring room Fix: Radiators remain selectable beneath windows added afterwards, including on angled walls Fix: LiDAR (Beta): Preserve scanned rooms when calculating automatic rooms and opening the finished plan Fix: LiDAR (Beta): Use a clearer doorway observation when it better matches the adjoining room Fix: LiDAR (Beta): Explain doors and windows scanning before asking you to look down, with direction based on the nearest remaining area Fix: LiDAR (Beta): Record corrected wall heights without interrupting the room review Fix: LiDAR (Beta): Refresh disappearing doors and windows silently and explain when a room preview needs another review Fix: LiDAR (Beta): Preserve short wall returns when reviewing and connecting adjoining rooms Fix: LiDAR (Beta): More reliable completion of missing floor space beside stairs

Improvement: LiDAR (Beta): Explain returning after cancelling a room and show when you can scan the next room Improvement: LiDAR (Beta): Clearer, colour-coded guidance for unscanned directions, walls, doors and windows Fix: LiDAR (Beta): Show stair-top scanning guidance while a known stairwell boundary is still being inferred Fix: LiDAR (Beta): Make the unavailable Finish button readable and clearly disabled Fix: LiDAR (Beta): Let room review recover from a small spurious wall fragment without clipping nearby openings Fix: LiDAR (Beta): Show room-outline guidance when the first room fails a wall check Fix: LiDAR (Beta): Allow room review when a measured stairwell side meets an overlapping wall Fix: Open saved plans with redundant splits in joined walls Fix: LiDAR (Beta): Avoid a crash when redrawing wall measurements after changing a corner Fix: Prevent a crash when making a room corner curved. Fix: LiDAR (Beta): Prevent wall alignment from making accepted rooms overlap and blocking Finish Fix: LiDAR (Beta): Prevent a scanner crash when an opening is detected more than once Fix: Keep EPC split measurements in place when resizing a locked wall before choosing a wall type Fix: Keep measured EPC wall sections within locked walls after resizing the drawing Fix: Show the current Velux window depth when editing it and use it in EPC reports and exported window dimensions and areas

Improvement: LiDAR (Beta): Delay under-opening scan highlights until the room shape is valid and guidance arrows appear Improvement: LiDAR (Beta): Clearer prompts to look down below openings and scan the top of stairs Improvement: Place automatic room titles in available room space before reducing their size Improvement: LiDAR (Beta): Larger room preview with camera controls at the top left and Cancel room at the bottom left Fix: LiDAR (Beta): Keep return guidance clear after cancelling an upstairs room before starting the stairs again Fix: LiDAR (Beta): Keep the recording permission checkbox large enough to tap in landscape Fix: Restore app launch compatibility with iOS 27 Fix: EPC window numbers stay sequential after windows or rooms are deleted, matching integration reports Fix: Prevent windows with negative widths being added to walls too short for the required end clearances Fix: LiDAR (Beta): Preserve stepped room boundaries when adding rooms and remove stale doorway guidance after adding a cupboard Fix: Keep item menus visible on narrow portrait screens Fix: EPC heat-loss wall splits respect entered wall measurements when the drawing is out of scale Fix: RdSAP JSON exports identify which rooms are marked as Room in Roof Fix: LiDAR (Beta): Recover adjoining-room entrances when doorway observations change Fix: LiDAR (Beta): Allow adjoining rooms with short stair-side returns to reach confirmation

Improvement: LiDAR (Beta): Reduce brief repeat guidance around the bottom of doors and windows Improvement: LiDAR (Beta): Choose mobile data or wait for Wi-Fi when sending data after cancelling a scan or finishing or cancelling its 2D plan Improvement: LiDAR (Beta): Explain how moving too fast affects scan accuracy and how good lighting helps Improvement: LiDAR (Beta): Restart device tracking when retrying a first room that could not begin capturing its outline Improvement: LiDAR (Beta): Choose radiator types and record their survey details in AR Improvement: LiDAR (Beta): Clearer doorway guidance with green arrows, green badge borders and darker backgrounds Improvement: LiDAR (Beta): Reduce disk activity while recording scan diagnostics Improvement: LiDAR (Beta): Save potential stair treads aligned with detected edges for later analysis Improvement: LiDAR (Beta): Upload scan data automatically while using ordinary app screens Improvement: LiDAR (Beta): Clarify that scan data uploads can be left until later Improvement: LiDAR (Beta): Recognise internal room dividers when preparing a room for review Improvement: LiDAR (Beta): Keep unjoined wall ends highlighted to guide further scanning Improvement: LiDAR (Beta): Explain how to start the next room and which wall to select as FRONT Improvement: LiDAR (Beta): Show when interrupted scans are awaiting iOS diagnostics before upload Improvement: BER building parts now have their own construction choices, included in the new JSON export version Improvement: JSON version 2026101500 explicitly labels excluded walls and item locations New: Choose a BER roof type for each room; Room in Roof automatically excludes its heat-loss perimeter. New: LiDAR (Beta): View, pause and resume pending scan data uploads before scanning Fix: LiDAR (Beta): Preserve stepped room walls instead of replacing them with an angled wall Fix: LiDAR (Beta): Preserve room splits and names when splitting a room entered through a doorway Fix: LiDAR (Beta): Keep accepted rooms connected when refining window measurements Fix: LiDAR (Beta): Complete small porches when a captured wall continues into the adjoining room Fix: LiDAR (Beta): Entering item dimensions replaces the scanned measurement while dragging keeps it unchanged Fix: LiDAR (Beta): Restore previews when reopening saved scanned plans Fix: Some saved plans could not be reopened Fix: Open saved plans whose joined walls need additional sections Fix: Keep adjoining angled walls consistent when joining square room corners Fix: LiDAR (Beta): Keep solid walls visible when an enclosed gap touches the outside boundary Fix: LiDAR (Beta): Preserve internal wall thickness when aligning adjoining room corners Fix: Repair tiny alignment errors in connected straight walls when opening a plan Fix: LiDAR (Beta): Copied plans are no longer marked as newly scanned LiDAR plans Fix: LiDAR (Beta): Allow adjoining rooms with closely spaced walls to reach review without repeated rescanning Fix: LiDAR (Beta): Capture stable compass readings when the device supplies them more frequently Fix: JSON exports now reflect automatic Room in Roof wall exclusions Fix: JSON version 2026101500 uses Excluded for item locations, matching the capitalization of other location labels Fix: LiDAR (Beta): Keep cupboard and service-channel previews aligned with the space they will fill, without covering retaining walls Fix: LiDAR (Beta): Resolve new-room overlaps caused by cupboard suggestions and explain any removed items Fix: LiDAR (Beta): Preserve different adjoining wall lengths when reviewing rooms Fix: LiDAR (Beta): Recover lost tracking before continuing into another room Fix: LiDAR (Beta): Resume permitted diagnostic recording after an inactive start Fix: LiDAR (Beta): Let waiting scan data upload when an earlier upload has expired Fix: LiDAR (Beta): Allow scan data uploads from the finished plan preview Fix: LiDAR (Beta): Keep added bay windows on the intended wall

Improvement: Plan searches return results more quickly and reliably for large accounts, while preserving international address matching Improvement: Plans saved by corporate child accounts now have their watermark removed automatically Improvement: Plans can now be transferred between accounts in the same master group without individual subscriptions or corporate plan-list access being enabled Improvement: Corporate accounts can now have access to their child-account plans enabled or disabled by PlanUp support Improvement: LiDAR improvements (for beta users only) Improvement: Choosing an existing integration plan now clearly explains the Copy this plan and Use this plan options, including their credit use New: Recently abandoned plans can now be restored from the New/Open screen New: The main editor now adapts its toolbars to narrow portrait screens and small windows New: iPhone and iPad now keep portrait-capable screens upright and switch to landscape automatically for parts not yet adapted New: PlanUp can now be launched from Quidos Pure to start integrated surveys Fix: Child accounts can now select their master account's saved styles without changing them Fix: Completed plan transfers no longer remain incorrectly marked as in progress, allowing a plan to be transferred again Fix: Master account plan lists now include plans owned directly by the master account as well as its child accounts Fix: Searching for plans by town now finds matching plans even when other addresses also match Fix: Master accounts can now edit child-account plans without transferring those plans to the master account Fix: Changing the width of straight stairs keeps their existing length Fix: Some plans with partially joined rooms could fail to open or create preview images Fix: A failed preview download no longer causes PlanUp to close unexpectedly Fix: Cancelling a plan while choosing a Wall-by-Wall starting wall no longer crashes PlanUp Fix: Deleting an adjoining room no longer causes a plan-saving error Fix: Changing a manually drawn bay window measurement no longer crashes PlanUp Fix: Compass direction stays manual for drawn plans to avoid using an unaligned device heading Fix: Rooms with attached cupboards must now have the cupboards removed first, preventing a crash when deleting the room Fix: Opening screens on iPhone and iPad now start and refresh in the device orientation, while portrait editor toolbars stay clear of notches and curved screen edges with a black surround Fix: Choosing a room name in the editor on iPhone and iPad again uses the familiar room-name dialog Fix: Finishing a plan on a small screen no longer requests a preview too small for the renderer Fix: EPC totals include Alternative Wall 2 lengths and show separate area breakdowns for both alternative wall types Fix: Doors opening into excluded rooms or balconies now appear consistently in EPC view and downloaded EPC plans Fix: Stairs now appear on their connected floor in EPC view Fix: Straight walls beside excluded rooms now stay straight in EPC view Fix: EPC plans with a compass shown only on EPC now render successfully Fix: Rooms with angled bay, box or bow windows can now be excluded in EPC view without an error Fix: Walls now return to Heat Loss when Room in roof is unticked in EPC view Fix: External door totals now exclude doors on party walls, heated corridors and excluded perimeter sections Fix: EPC reports and integration returns now include Alternative Wall 2 in wall areas and heat-loss totals Fix: Glazed doors now contribute to glazed perimeter totals only when they are part of a non-separated conservatory Fix: Doors changed to over 60% glazed now receive a unique window number in EPC view Fix: Finished integration surveys saved offline can now upload automatically when PlanUp reconnects

Improvement: Plan searches return results more quickly and reliably for large accounts, while preserving international address matching Improvement: Plans saved by corporate child accounts now have their watermark removed automatically Improvement: Plans can now be transferred between accounts in the same master group without individual subscriptions or corporate plan-list access being enabled Improvement: Corporate accounts can now have access to their child-account plans enabled or disabled by PlanUp support Improvement: Choosing an existing integration plan now clearly explains the Copy this plan and Use this plan options, including their credit use Improvement: LiDAR improvements (for beta users only) New: Recently abandoned plans can now be restored from the New/Open screen New: The main editor now adapts its toolbars to narrow portrait screens and small windows New: iPhone and iPad now keep portrait-capable screens upright and switch to landscape automatically for parts not yet adapted New: PlanUp can now be launched from Quidos Pure to start integrated surveys Fix: Child accounts can now select their master account's saved styles without changing them Fix: Completed plan transfers no longer remain incorrectly marked as in progress, allowing a plan to be transferred again Fix: Master account plan lists now include plans owned directly by the master account as well as its child accounts Fix: Searching for plans by town now finds matching plans even when other addresses also match Fix: Master accounts can now edit child-account plans without transferring those plans to the master account Fix: A failed preview download no longer causes PlanUp to close unexpectedly Fix: Cancelling a plan while choosing a Wall-by-Wall starting wall no longer crashes PlanUp Fix: Deleting an adjoining room no longer causes a plan-saving error Fix: Changing a manually drawn bay window measurement no longer crashes PlanUp Fix: Compass direction stays manual for drawn plans to avoid using an unaligned device heading Fix: Rooms with attached cupboards must now have the cupboards removed first, preventing a crash when deleting the room Fix: Opening screens on iPhone and iPad now start and refresh in the device orientation, while portrait editor toolbars stay clear of notches and curved screen edges with a black surround Fix: Choosing a room name in the editor on iPhone and iPad again uses the familiar room-name dialog Fix: Finishing a plan on a small screen no longer requests a preview too small for the renderer Fix: Doors opening into excluded rooms or balconies now appear consistently in EPC view and downloaded EPC plans Fix: Stairs now appear on their connected floor in EPC view Fix: Straight walls beside excluded rooms now stay straight in EPC view Fix: EPC plans with a compass shown only on EPC now render successfully Fix: Rooms with angled bay, box or bow windows can now be excluded in EPC view without an error Fix: Walls now return to Heat Loss when Room in roof is unticked in EPC view Fix: External door totals now exclude doors on party walls, heated corridors and excluded perimeter sections Fix: EPC reports and integration returns now include Alternative Wall 2 in wall areas and heat-loss totals Fix: Glazed doors now contribute to glazed perimeter totals only when they are part of a non-separated conservatory Fix: Doors changed to over 60% glazed now receive a unique window number in EPC view Fix: Finished integration surveys saved offline can now upload automatically when PlanUp reconnects

Improvement: LiDAR improvements (for beta users only) Improvement: Choosing an existing integration plan now clearly explains the Copy this plan and Use this plan options, including their credit use Improvement: Plans can now be transferred between accounts in the same master group without individual subscriptions or corporate plan-list access being enabled Improvement: Corporate accounts can now have access to their child-account plans enabled or disabled by PlanUp support Improvement: Plan searches return results more quickly and reliably for large accounts, while preserving international address matching New: Recently abandoned plans can now be restored from the New/Open screen New: PlanUp can now be launched from Quidos Pure to start integrated surveys Fix: Finishing a plan on a small screen no longer requests a preview too small for the renderer Fix: A failed preview download no longer causes PlanUp to close unexpectedly Fix: Cancelling a plan while choosing a Wall-by-Wall starting wall no longer crashes PlanUp Fix: Glazed doors now contribute to glazed perimeter totals only when they are part of a non-separated conservatory Fix: EPC plans with a compass shown only on EPC now render successfully Fix: EPC reports and integration returns now include Alternative Wall 2 in wall areas and heat-loss totals Fix: Walls now return to Heat Loss when Room in roof is unticked in EPC view Fix: External door totals now exclude doors on party walls, heated corridors and excluded perimeter sections Fix: Finished integration surveys saved offline can now upload automatically when PlanUp reconnects Fix: Master account plan lists now include plans owned directly by the master account as well as its child accounts Fix: Master accounts can now edit child-account plans without transferring those plans to the master account Fix: Completed plan transfers no longer remain incorrectly marked as in progress, allowing a plan to be transferred again

Improvement: LiDAR room scanning now makes drawing floor plans easier on supported iPhone Pro and iPad Pro models. Improvement: Choosing an existing integration plan now clearly explains the Copy this plan and Use this plan options, including their credit use Improvement: Plans can now be transferred between accounts in the same master group without individual subscriptions or corporate plan-list access being enabled Improvement: Corporate accounts can now have access to their child-account plans enabled or disabled by PlanUp support Improvement: Plan searches now return results more quickly and reliably for accounts with a large number of plans Improvement: Password resets, account verification, plan transfers and data deletion requests now use clearer, mobile-friendly pages New: Recently abandoned plans can now be restored from the New/Open screen New: The main editor now adapts its toolbars to narrow portrait screens and small windows New: PlanUp now supports portrait orientation on more screens and automatically switches to landscape where required. New: iPhone and iPad now use the same searchable room-title picker throughout PlanUp New: iPhone and iPad room-title pickers now include Airing Cupboard and Wardrobe New: iPhone and iPad room-title pickers can now add or delete custom names, associate them with a standard room type and remember them on that device New: PlanUp can now be launched from Quidos Pure to start integrated surveys Fix: Finishing a plan on a small screen no longer requests a preview too small for the renderer Fix: A failed preview download no longer causes PlanUp to close unexpectedly Fix: Cancelling a plan while choosing a Wall-by-Wall starting wall no longer crashes PlanUp Fix: Newly added room names containing spaces now remain available for immediate selection on iPhone and iPad Fix: Screens now open and refresh in the correct device orientation, and portrait editor toolbars stay clear of notches and rounded screen corners. Fix: Glazed doors now contribute to glazed perimeter totals only when they are part of a non-separated conservatory Fix: EPC plans with a compass shown only on EPC now render successfully Fix: Walls now return to Heat Loss when Room in roof is unticked in EPC view Fix: External door totals now exclude doors on party walls, heated corridors and excluded perimeter sections Fix: Surveys completed in mobile PlanUp can now be continued through web integration Fix: Finished integration surveys saved offline can now upload automatically when PlanUp reconnects Fix: ECMK integrations using older data formats now correctly identify both alternative wall types. Fix: Master account plan lists now include plans owned directly by the master account as well as its child accounts Fix: Master accounts can now edit child-account plans without transferring those plans to the master account Fix: Completed plan transfers no longer remain incorrectly marked as in progress, allowing a plan to be transferred again

Fix: Integration JSON using older schemas now outputs both alternative wall types as alternative

EPC Report - Huge improvements Full changelog: https://www.planup.co.uk/changelog.html

https://www.planup.co.uk/changelog.html

https://www.planup.co.uk/changelog.html

RdSAP10 Phase 2: Big update, main ones: - Traffic light system for EPC data collection - Extractor fan and Passive vent added - Alt Wall 1 & 2 - Heating & meters - Property details - Can now hide/show all items on marketing/EPC plan - Door glazing over 60% now acts as window - SVG replacing WMF - Updated colour picker for plan styles

Fix: Using the Back button when using via an integrated app - occasions where the link between PlanUp and integrated app was lost Fix: Type in window descriptions for view on sea etc, and now present in XML used to export descriptions show in description ticked by default. Still able to untick per room Fix: Bathrooms now added to bullet section at top of descriptions Fix: Bathroom count added to XML Fix: Plan list should now let you search for a plan reference Improvement: Room option to show measurements in description - auto un-ticked for rooms like Hallways, WC. Confusing, so now all rooms have Improvement: Removed the auto hide door frame feature when adding close the a wall - based on feedback from many customers not liking it

v9.6.3 New: Integration with iQ-Energy from Quidos Improvement: Floor Up/Down buttons on bottom toolbar - increased hit area so easier to select Improvement: Increased space between menu options on touch devices to make easier to select Improvement: EPC light count dialog - made easier to select on touch devices Improvement: Window EPC options made easier to hit on touch devices Improvement: Top yellow toolbar - made bigger on touch devices and easier to hit options Fix: Re-added round corners on boxes for iOS Fix: Straight stairs on angled walls coming in as L-shaped Fix: Various crashes Fix: Tightening up HLP wall lengths and overall total New: Updated design for 'Add a room' in top right of editor, and made easier to tap each option on touch devices New: Added support for Json for integrated apps New: Added floor level into XML/Json Removed: Photoplans and View in Browser... both of these were used by less than 3% of all PlanUp users, and haven't been updated in over 10 years Both options have been removed. Photoplans are intended to be replaced with a much better feature, being able to take photos while drawing a floor plan Removed: Removed 'Send an email' and 'Copy link' when choosing a customer for a floor plan

Fix: Offline plans sometimes not uploading

v9.5.7.2 15-08-2025: Apple (Store Version: 3.59) Fix: Off-line plans not uploading Fix: Integration plans overwriting previous plans

Fix: Stairs - 3D stairwell default position improvements - New option to preview all stairwells for 3D - Various other fixes

v9.5.4.2 19-07-2025: Apple (Store Version: 3.55) Fix: Big improvements to angled wall and room drawing Fix: Stair handles and rotating stairs now working much better Fix: 3D stairwells now by default more sensible Fix: Velux Windows now show on EPC report

v9.5.3.2 01-07-2025: Apple (Store Version: 3.54) New: Light bulbs now show in floor totals in EPC Report Fix: EPC Report - Velux window dimensions + EPC data now included Fix: Bay & Bow windows now displayed on EPC Report Fix: Unheated corridors now listed on EPC Report Fix: In editor, Extensions 5 & 6 now get distinct colours for easy identification Fix: Infinite loop when launching PlanUp with an old style offline file