Save presets from the plugin. The Ampz AUv3 can now save your edited rig straight back into the standalone app's preset library. Fixed • iPhone Plus and Max models: in landscape, the control knobs sat below the bottom of the screen with no way to reach them. All controls now fit on screen. • Dual-cab rigs lost their right-hand cab every time you switched presets. • Rigs loaded in the plugin now keep their cabs when a host saves and reopens a project.

Two fixes for impulse responses. FIXED: In dual IR mode, where the left and right channels each load their own cabinet, the right-hand cab was lost when switching presets. Both cabs are now saved and restored. FIXED: In the AUv3 plugin, loading one of your Ampz presets and then saving the project in your host left the cabinets out of the saved project. They now save and reload with the rest of the rig.

Share your rig, and full support for multi-channel audio interfaces. NEW: Share a rig. Send a complete rig to a bandmate or your other device as a single file. The amp model and cabinet IR travel with the preset, so it loads ready to play. Share from the preset browser, and open shared rigs straight from Files, AirDrop or Mail. NEW: Choose your interface. If you have more than one audio device connected, pick the one you want. Ampz remembers your choice. Multi-channel interfaces now expose every input and output, so you can run into channel 3 (or 18) instead of being stuck on 1 and 2. FIXED: Impulse responses no longer reset to "No IR" when you switch presets. FIXED: Effect knobs no longer get cut off at the bottom on smaller iPhones. FIXED: Plugin parameter mapping now works in external hosts

This update fixes the drum loop volume slider, which would not respond to dragging on some devices. You can now adjust the drum volume freely.

AUv3 Plugin — full multi-amp rigs - Load a different NAM model in any effect slot inside AUM, Loopy Pro, GarageBand, and other hosts — same multi-amp engine as the standalone app - Browse and load your app presets right from the plugin, with the loaded preset name and prev/next arrows in the header - New plugin instances automatically pick up the preset you were last using in the app - Stability fixes for preset recall and session restore in hosts VoiceOver - Complete VoiceOver support across the app and plugin: every knob, EQ fader, pedal, and control is labeled — knobs and faders are adjustable with swipe up/down, and chain pedals announce their state with bypass and reorder actions iPad - Redesigned for large screens: bigger knobs, pedals, toolbar, and touch targets, with text proportionally larger throughout - The knob grid now uses the full height of the panel, and the looper, drum machine, tuner, and live-performance views scale to the display - Improved portrait layout with the Library sidebar open Tone3000 & importing - Downloaded models are now tagged by gear type, with new filter chips in the model browser (existing downloads are tagged automatically) - Paste a tone3000.com link to jump straight to that tone - Open .nam files in Ampz directly from the Files app or any share sheet Effects & fixes - Envelope auto-wah now sweeps properly in envelope mode - Analog Octave: the sub-octave voice is audible again and octave-up level is matched - Ampz now reopens with your last-used preset, without an audio glitch at launch

AMPZ 1.4.1 • Tuner — stronger detection: locks onto quiet signals and low strings • Tuner — rock-steady needle: smoothing, and octave/flicker rejection for fast, stable tuning. • Cleaner pitch shifting: reduced high-end artifacts on the Poly Shifter.

AMPZ 1.4.0 — Multi-Amp Update • Multiple NAM models at once: any pedalboard slot can now load its own NAM capture — stack a pedal capture into an amp capture, or run two amps. • Live DSP meter: see your rig's real processing load at a glance, with a smarter overload warning and automatic recovery from CPU throttling after heavy model swaps. • Smoother model switching: hot-swapping captures is now glitch-free and can't leave a slot silent — even if a model file fails to load. • AUv3 plugin upgrades: your host now shows real effect and parameter names for every slot (with per-slot bypass automation), follows host tempo for synced delays, honors your spillover setting, and gets the 7-band EQ fader layout plus a DSP load badge. • Swipe a pedal to bypass it — quick mute/unmute right from the chain. • Faster launch and much lower memory use — looper buffers now allocate only when you first use the looper. • Fixed: saving a preset could silence the amp until the model was reloaded. • Fixed: a bypassed reverb could keep processing with spillover enabled. • Easier saving: the Save button has a larger touch target and clear separation from the preset arrows — no more accidental preset changes.

- Redesigned iPad layout — sidebar browsing, full landscape rig view, bigger controls - Fixed a rare crash when changing or saving presets - Audio reliability improvements

A fresh new look, plus important AUv3 fixes. NEW DESIGN - Ampz has been redesigned with a skeuomorphic interface — realistic brushed-metal faceplates, knobs, pedals, and graphic EQ sliders, with each effect styled to its own family color for an authentic hardware feel. AUDIO UNIT (AUv3) FIXES — for hosts like Loopy Pro and Audiobus - Presets now correctly save and recall all amp and effect settings, including the distortion circuit and parameter knobs. - Fixed audio coming from only the left channel (with noise on the right) when the amp was the last item in the chain — it now plays centered on both sides. - You can now re-add the NAM Amp to the chain from the "+" menu if it was removed.

- Fixed a bug where saving and recalling presets inside AUv3 hosts (Loopy Pro, AUM, and others) didn't restore your effects, amp model, or impulse responses (the plugin kept its current settings instead). - Presets now reload exactly as you saved them. - Note: presets saved in earlier versions will need to be re-saved once to capture their effect settings.

Metering & levels • New input/output meters with clip indicators and dB readouts — see your levels at a glance. • Input "sweet-spot" marker shows the ideal drive for each amp, with an over-drive warning tint. • One-tap Auto-Calibrate sets your input level by ear for any NAM model. • NAM models now default to a Normalized output level, so switching models stays consistent in volume. Delay improvements • Fixed feedback running away into distortion at high settings. • Removed the "pop" when engaging the delay. • Effect Trails now ring out fully and fade smoothly instead of cutting off early. AUv3 plugin • Input metering, sweet-spot, and Auto-Calibrate now in the plugin too. • The Input control now drives the amp consistently with the standalone app. Plus performance and stability improvements throughout.

Ampz is now an Audio Unit plug-in! • NEW — AUv3 Effect: Run Ampz's neural amp models and full effects chain right inside your favorite AUv3 host. • In-plugin model & IR pickers, tempo-sync subdivisions, and auto-wah controls. • Your rig (amp, IRs, and effects chain) now saves and restores with your host project. • Fixed: reverb could collapse stereo to mono when placed after a ping-pong delay — stereo is now preserved. • Smoother, more reliable control knobs. • Compressed the drum loops wav files to significantly reduce app size

- Smarter MIDI control: tap any slot to map a parameter or bypass inline. - Tone3000 browser refreshed with cover art, smart sort, and per-variant downloads. - Spring reverb refined for tighter dispersive chirp.

• Improved Tone3000 model browser: larger rows for easier browsing, more reliable model parsing, and tags now load on first open • IR browser: tile names now refresh correctly when you open the browser • Tighter, more consistent keyboard behavior across all text fields • Performance and stability improvements

• A2 speed boost — optimized inference path for A2 amp models • Performance Mode — choose Best Quality, Balanced, or Low Power in Settings to match your device's capability • Improved Delay Time knob — range tightened so short, musical, and long delays each get their fair share of the sweep • Updated amp modeling engine for broader .nam file support