FeedbackGuard
Musik
CHF 3.00 · Entwickelt für iPad. Nicht für macOS überprüft.
FeedbackGuard is an Audio Unit v3 effect that stops acoustic feedback before it ruins your performance. Whether you are singing live, speaking on stage, or recording vocals on iPad, FeedbackGuard listens for runaway howling and automatically places precise notch filters — so you can focus on the show, not the squeal.
HOW IT WORKS
FeedbackGuard uses PNPR (Peak-to-Neighbourhood Power Ratio) analysis combined with a growth check to tell real feedback apart from normal voice, speech, or room tone. When a howling peak starts to build, the plugin tracks it and deploys an adaptive notch bank that reacts in milliseconds.
Before the show, Room Setup locks permanent red notches on your room modes. During the show, choose Standard Adaptive (narrow notches) or AI mode — AI keeps the voice and pulls down howls, room, noise, and bleed. If playback bleeds into the mic, Sidechain subtracts that reference from detection — analysis only, never mixed into the output.
KEY FEATURES
• AI mode — keeps the voice; ducks howls, room, noise, and bleed (0 ms or ~11 ms)
• Room Setup — permanent red pins for your room (do this first)
• Real-time howling detection (PNPR + run-up check)
• Adaptive notch bank — up to 24 simultaneous notches (Standard mode)
• Sidechain / reference masking (Bus 2 or Main L/R) with connection status
• Live spectrum display with Setup and Adaptive markers
• “Balanced” preset for safe, transparent defaults
• User preset slots — tap to recall, hold to save / overwrite / rename / delete
• Fine-tuned controls: Sensitivity, Notch Threshold, Suppression, Q, Attack, Release
• Optional harmonic tracking for stubborn feedback tones
• Optional spectral noise reduction for quiet passages
• Full bypass
GET STARTED IN SECONDS
1. Open your AUv3 host (GarageBand, AUM, Cubasis, and more)
2. Insert FeedbackGuard as an audio effect on your vocal or monitor channel
3. Run Room Setup — raise gain until whistles appear, hold each briefly
4. Pick Standard + Adaptive, or switch to AI for voice-first suppression
5. Optional: enable Sidechain and route playback to Bus 2 (see Quick Start)
IDEAL FOR
• Live vocals and speech
• Rehearsals, worship, small PA setups
• Mobile recording rigs on iPhone and iPad
• Any situation where monitor feedback is a risk
COMPATIBILITY
• Audio Unit v3 (aufx) effect
• iPhone and iPad
• Works in any AUv3-compatible host
• Mono or stereo, sample rates from 8 kHz to 192 kHz
FeedbackGuard — Adaptive Feedback Suppressor by Norwin Palme.
Bewertungen & Rezensionen
- Diese App hat noch nicht genügend Bewertungen oder Rezensionen erhalten, um eine Übersicht anzuzeigen.
AI mode keeps the voice clear while ducking howls, room, noise, and bleed.
• AI mode with 0 ms or ~11 ms latency and Strength control
• Sidechain / reference masking (Bus 2 or Main L/R) with connection status
• Hold a preset to save, overwrite, rename, or delete
• Lighter DSP load and faster detection path
Das Entwicklungsteam, Norwin Palme, hat darauf hingewiesen, dass die Datenschutzrichtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklungsteams .
Keine Daten erfasst
Der Entwickler erfasst keine Daten von dieser App.
Bedienungshilfen
Der Entwickler hat noch nicht angegeben, welche Bedienungshilfen diese App unterstützt. Weitere Infos
Informationen
- Anbieter
- Norwin Palme
- Größe
- 4 MB
- Kategorie
- Musik
- Kompatibilität
Erfordert iOS 17.0 oder neuer.
- iPhone
Erfordert iOS 17.0 oder neuer. - iPad
Erfordert iPadOS 17.0 oder neuer. - Mac
Erfordert macOS 14.0 (oder neuer) und einen Mac mit Apple M1-Chip (oder neuer).
- iPhone
- Sprachen
- Englisch
- Altersfreigabe
4+
- 4+
- Copyright
- © 2026 Norwin Palme

