Audio Evolution Mobile Studio
音乐
¥88.00 · App 内购买 · 专为 iPad 设计。未针对 macOS 验证。
Record your ideas on the go or create entire music productions from scratch, we'll leave it up to you! This app is a portable multitrack audio and MIDI recording studio featuring virtual instruments, pitch and time editing of vocals (*), unlimited undo/redo, mixing, real-time effects, automation and much more!
Features:
• Multitrack audio recording / playback
• MIDI sequencing with piano roll editor and MPE support
• Drum pattern editor (including triplets, use your own samples and effects chain per drum sound)
• Automatically or manually tune your vocals with Vocal Tune Studio (*) : an editor to correct pitch and time of vocal recordings and the timing of any audio material. It features retune time, retune amount, volume and formant correction per note as well as vibrato controls.
• Add tempo and time signature changes including gradual tempo change
• Real-time effects including: chorus, compressor, delay, dual delay, reverse delay, reverb, flanger, noise gate and many more!
• Neural Amp Modeler (NAM) with TONE3000 integration offering access to a massive library of NAM captures and IRs of real analog amps, pedals and cabs
• Flexible effect routing: an unlimited number of effects can be placed on a grid, featuring parallel effect paths.
• Assign LFO's to effect parameters or lock parameters to tempo
• Sidechain on the compressor effects
• Inter-app audio effects and instruments
• AudioBus support (including AudioBus remote)
• Audio Unit instruments, effects and AU MIDI
• Multi-output support for Audio Unit instruments
• Virtual analog synthesizer 'Evolution One' featuring morphing oscillators, FM, Sub Osc, Noise, Portamento, 2 LFO's that can be routed to 12 targets, Moog type filtering, effects, ARP, sequencer and more!
• Soundfont (sf2/sf3/sfz) support: free GS/GM Soundfont included, add more from the Soundfont shop or from your own collection
• Special Live performance mode for playing virtual instruments live (worship etc.) with more easy access to instruments, track volume and effects.
• Non-linear editing with move, trim, split, cut/copy/paste, remove, cross-fade, time-stretching etc. with full undo/redo
• Virtual instruments (comes with free instruments and more instrument packs to download)
• Track freezing to save CPU usage
• Clip volume and fade points
• Automation of mixer and effect parameters
• Mix-down to WAV, AIFF and ALAC
• MIDI clock sync
• MIDI remote control
• Unlimited number of tracks and groups
• Non-realtime effects: fade in/out, normalize, reverse, pitch shift, time stretching
• Export to other DAW's by rendering all tracks to separate audio files (stems)
• Media server to access your files easily from a desktop computer
• Multi-core support
• AudioShare support
• Cloud sync using Google Drive and Dropbox
In short: a complete portable multitrack music studio that will replace your fourtrack recorder or tape machine!
(*) The following in-app purchases are available to expand your studio:
• ToneBoosters effect pack 1 (Barricade, DeEsser, Gate, Reverb)
• ToneBoosters EQ with frequency analyzer
• ToneBoosters Compressor
• ToneBoosters Ferox
• ToneBoosters V4 Barricade
• ToneBoosters V4 BitJuggler
• ToneBoosters V4 Compressor
• ToneBoosters V4 Enhancer
• ToneBoosters V4 EQ
• ToneBoosters V4 MBC (multi-band compressor)
• ToneBoosters V4 ReelBus
• ToneBoosters V4 Reverb
• ToneBoosters V4 Sibilance
• ToneBoosters V4 Voice Pitcher
• Vocal Tune with two-voice harmonizer and Vocal Tune PRO, both real-time vocal pitch correction effects
• Vocal Tune Studio: auto tune your vocals, pitch and time correction
• Soundfont instrument packs
• Loop packs from Function Loops
The 'PRO' in-app purchase is only for people who downloaded version 1.x in the past and is not applicable to version 2.0 or higher.
If you have any suggestions, questions or want to report a bug, please contact us! We'll gladly solve any problem!
Facebook: https://www.facebook.com/AudioEvolutionMobile
Forum: https://www.extreamsd.com/forum
更多 我购买了，用此软件把音频文件转成MIDI文件时，为什么提示需要付费？要两次付费才能使用吗？
我购买了，用此软件把音频文件转成MIDI文件时，为什么提示需要付费？要两次付费才能使用吗？
* Added the Neural Amp Modeler (NAM) to the AMP effects, letting you play and record through highly accurate digital models of real guitar amps, pedals and complete rigs. Load NAM files, combine them with speaker-cabinet impulse responses (IRs), and shape the sound using input, gate, tone and output controls. Note that NAM processing is very CPU-intensive.
* eXtream Software Development has integrated with TONE3000 to give you access to a massive library of Neural Amp Modeler (NAM) captures and IRs of real analog amps, pedals and cabs created by a global community of musicians. Browse the TONE3000 catalog from within the effect, view tone images and details, select model variants and load them directly into the appropriate pedal, amp or cabinet section.
7.3.5 15小时前
Added 'MIDI thru' to the MIDI settings where you can select a MIDI output device for each MIDI input device. All incoming MIDI events will be routed unchanged to the selected output device.
7.3.4 10月20日
* Solved some issues with insets due to issues with iOS27.
* Solved an issue with AudioShare that could cause a crash on iOS27.
7.3.3 10月8日
* Minimum iOS version is now 15.6 (upcoming enforcement by Apple).
* Added an option to set the cross-fade time for scenes (long-press on the scene for the pop-up menu). Note that this currently only applies to volume.
* In the previous version, in Live Performance mode with 'Send note off on un-arm' turned off and 'Let notes finish after un-arming' turned on, notes were not held anymore after un-arming. Solved.
* Solved an issue on OSX 27 where purchases were not restored.
* The app did not start anymore on iOS27, solved.
7.3.2 10月2日
* Minimum iOS version is now 15.6 (upcoming enforcement by Apple).
* Added an option to set the cross-fade time for scenes (long-press on the scene for the pop-up menu). Note that this currently only applies to volume.
* In the previous version, in Live Performance mode with 'Send note off on un-arm' turned off and 'Let notes finish after un-arming' turned on, notes were not held anymore after un-arming. Solved.
* Solved an issue on OSX 27 where purchases were not restored.
* The app did not start anymore on iOS27, solved.
7.3.1 10月1日
The Global page in MIDI Remote Setup wasn't visible anymore in the last version. Solved.
7.2.9 9月2日
* Added a 'Scenes' button to the Live Performance mode. A scene contains mixer channel, effect and instrument parameter states.
Switching between scenes is very fast and allows to arm and un-arm groups of tracks, which is quicker than loading projects.
Projects/songs are still useful when not all the Soundfonts you want to use fit in memory at once.
You can toggle between a list view of scenes at the right side of the screen or a grid covering the whole screen.
Adding a scene will store the mixer state as it is at that time. You can long-press a scene for Save, Delete and Rename.
Scene switching can also be done by MIDI CC numbers, for which a new category 'Scenes' is added to the MIDI Remote Setup.
* Added an option 'Let notes finish after un-arming' to the Live Performance settings. This will keep on playing held notes until release.
* The Mixer display channel offset is now updated when sending a MIDI command for Next/Prev bank.
* The default is now 'Send note off on un-arm' for live performance projects.
* Implemented sustain pedal for Evolution One.
* Solved MIDI clock sync issue with negative MIDI clock sync correction.
* Added 'Pitch bend range' to the MIDI input dialog for tracks with Soundfonts as instruments.
* 'Rename' and 'Remove' Setlist in the Setlist dialog are now implemented.
* Added a 'MIDI Monitor' option to the More menu.
7.2.8 8月25日
* Solved a possible crash with IAA.
* In Evolution B3, the toolbar area could show corrupted graphics. Solved.
* Solved problem with preset selection of the Evolution B3 on smaller screens.
* Added 'MIDI remote control' to the ADSR control pop-up menu in Live Performance mode.
* When loading a MIDI remote setup that was created with an older version and did not include the latest commands, those commands were previously not shown. Solved.
7.2.7 7月9日
* Solved a crash that could occur when loading a project and the option to display the master channel in the track mixer was enabled.
* Added a MIDI 'Panic' button to Live Performance mode.
* Added a new parameter 'Leslie mode 2' to Evolution B3 where the first third is off, then slow, then fast which is easier to use with an expression pedal.
* The Mute button could not be toggled for master/group channel in Live Performance mode. Solved.
7.2.6 6月27日
* Solved a crash when trying to delete a file in the File Browser when the file had non-standard characters.
* Solved a crash when importing a file by drag&drop under certain conditions.
* Changing live performance mode state will now only take place after a restart.
7.2.4 6月18日
* When not using the device's native sample rate, playback and recording could stop with a failure message. Solved.
* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved.
* Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed.
* Solved a crash in live performance mode when adding a track when a track was armed.
* If AudioBus was active, tracks were un-armed when starting to record. Solved.
* In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved.
* The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.
7.2.3 6月10日
* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved.
* Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed.
* Solved a crash in live performance mode when adding a track when a track was armed.
* If AudioBus was active, tracks were un-armed when starting to record. Solved.
* In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved.
* The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.
7.2.2 6月6日
* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved.
* Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed.
* Solved a crash in live performance mode when adding a track when a track was armed.
* If AudioBus was active, tracks were un-armed when starting to record. Solved.
* In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved.
* The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.\n" +
7.2.1 6月4日
* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved.
* 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved.
* Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved.
* Selecting MIDI remote setup would un-arm the tracks. Solved.
* Improved memory management when switching Soundfonts.
* Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode.
* Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel.
* Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks.
* The app is now able to display in full screen on a Mac.
7.1.9 5月31日
* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved.
* 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved.
* Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved.
* Selecting MIDI remote setup would un-arm the tracks. Solved.
* Improved memory management when switching Soundfonts.
* Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode.
* Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel.
* Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks.
* The app is now able to display in full screen on a Mac.
7.1.8 5月30日
* This update adds Evolution B3, a new tonewheel organ emulation instrument, and a Rotary Speaker effect. Both are included in one single in-app purchase and cannot be bought separately.
Evolution B3 highlights:
* models 91 tonewheel oscillators, key click, leakage, percussion, scanner vibrato/chorus etc.
* separate upper, lower and pedal manuals with independent MIDI channels
* full MIDI remote control of every parameter including the drawbars
Rotary Speaker highlights:
* models rotating horn, doppler effect, cabinet, mic etc.
* adjustable slow/fast horn speed, crossover, mic distance and cabinet reflections
* Unlock the complete sample loop collection in one low price purchase of 4.49 euro ex VAT. This bundle includes all 18 sample loop packs (869MB!), with a wide range of professionally produced loops from Function Loops. Loop packs cannot be purchased separately anymore.
* BETA: Added a 'Live performance' mode targeted at people who use the app primarily for playing virtual instruments on stage.
The feature can be activated in the BETA settings (Live Performance mode (BETA)).
In 'Live performance' mode, the app creates 16 instrument tracks (or what you set as 'Initial number of tracks' in the 'Live performance' settings), mixer channels are optimized for arming tracks and switching instruments, and there is a 'FX stack' option to display the most common effects at once for quick access.
* Besides this, projects/songs can be added to set lists to quickly jump between songs, including by MIDI CC.
* Note that this is a BETA feature, please contact us by e-mail when you find issues or have suggestions for improvement.
* Improved mixer scrolling: now smooth instead of stepped.
* Added a non-realtime Denoise option to the 'Apply effects' menu item in the audio clip pop-up menu.
* Added an option 'Display master channel in track mixer' to the Mixer settings.
* Added a 'MIDI learn' button to the key range option in the MIDI input dialog.
* Added '-12' and '+12' buttons to the Transpose option in the MIDI input dialog.
* Added a 'Tube Drive' plug-in.
* Unfreezing a track while playing could cause a crash. Solved.
* When pasting a MIDI clip to a different track, the MIDI channel of the note on's were changed accordingly, but not the note off's which could lead to hanging notes. Solved.
* Added a Spanish translation.
* Solved a memory leak when loading projects where Soundfonts remained in memory.
7.1.7 4月30日
'Import' in the multi-instrument drum pattern sound selection dialog did not work when choosing the option 'Directory'. Solved.
7.0.8 1月26日
* In the MIDI remote setup dialog, when using MIDI learn, the textbox did not get updated directly with the MIDI CC value. Solved.
* 'All MIDI channels' setting did not work in MIDI remote setup. Solved.
* 'Arm by MIDI PC' in the MIDI remote control editor did not work anymore. Solved.
* 'Import' in the multi-instrument drum pattern sound selection dialog did not always work. Solved.
7.0.7 1月26日
* Solved a possible crash when duplicating a track.
* Track names are now stored when exporting to a MIDI file.
* Solved an issue with ADSR changes not being applied.
7.0.6 1月19日
* Added a 'Project storage folder' option to the BETA settings where you can change the storage folder for projects to a USB drive for example.
* Added an option 'Input velocity' to the MIDI input dialog which opens a dialog where you can set the input velocity curve. This can be stored either per MIDI device or per track. The 'Output velocity range' option has been removed and if it was set, it is now mapped to the input velocity curve.
* Many changes to MIDI remote setup:
- Added Latched/unlatched and MIDI channel columns to support a wider variety of MIDI controllers with different button behaviors.
- Because of that, 'Play triggers at 127 only' and 'Arm toggles' have been removed since they can be controlled by turning Latched on or off.
- 'First available input' is now changed to 'All'.
* When loading a project with two similar USB MIDI keyboards attached, the app should now assign the correct input to the tracks, given the project was saved with this version.
* Solved an issue with AUv3's not recording MIDI channel pressure, like the GeoShred Tenor Sax.
* Ported the 'Load Project' and 'Instrument selection' dialogs to JUCE.
* Solved issues with default note velocity in the drum pattern editor.
* Mix-down to M4A format with a sample rate of 48000Hz was not possible anymore. Solved.
* Solved bugs in and improved the Compressor.
7.0.3 1月6日
* Added an option 'By BPM' to the time stretch dialog where you can enter a source and target BPM.
* Added an option 'Ignore MIDI volume (CC 07)' to the MIDI input dialog.
* Added an option 'Ignore pitch bend' to the MIDI input dialog. This can help with faulty MIDI keyboards that erroneously send pitch bend messages.
* Added an option 'Solo exclusive mode' to the Mixer channel settings.
* Solved a possible crash when loading a project with AudioBus active.
* The setting 'Ignore other MIDI CC's was not saved. Solved.
* The time stretch button in the piano roll editor did not work anymore. Solved.
* Available memory display in the instrument selection dialog now gets updated every second which is more reliable since Soundfonts are loaded in the background.
* Wheels on/off state in the virtual keyboard is now remembered.
6.9.8 2025/08/19
* Long-pressing a Soundfont in the instrument selection dialog now opens a menu where you can choose to delete the Soundfont.
* Added a search field to the automation parameter selection and MIDI CC selection dialogs.
* Calculation of the pre-computed graphics file for audio clips now happens in the background. For long audio clips, this could mean that the waveform is not displayed directly after importing or recording and that 'Loading...' is displayed in the clip.
* Loading a project name with international characters didn't work. Solved.
* Values are now displayed underneath the graphic EQ sliders for iPads.
6.9.6 2025/07/16
* Note offs are now sent to an AU MIDI after stopping playback. Before, starting playback could still have a hanging note that was processed.
* Added 'Render to a MIDI file' to the track pop-up of instrument and MIDI tracks so you can save individual tracks to a MIDI file.
* Solved a possible crash that could occur when disconnecting or connecting a USB audio device.
* Audio tracks are now unarmed when attaching/detaching an audio device.
6.9.4 2025/06/30
* Added search fields to the instrument selection and effect selection dialogs.
* Parameters with automation points are now displayed on top in the parameter selection menu.
* Added an option 'Show MIDI channel button in piano roll' to the MIDI settings. This can be helpful with Audio Units like the (upcoming) Battallion drum machine.
* The FX Send block now displays the target bus name as subscript.
* Opening the MIDI remote control for effect parameters twice could result in the MIDI learn not working anymore. Solved.
* When swapping effects with a side chain, the side chain wasn't swapped as well. Solved.
* A connection from the IN block to the second row was not set when loading a FX grid. Solved.
* User-defined drum kits were not displayed in the multi-instrument selection section. Solved.
6.9.2 2025/06/11
* Added an option 'Track selection' to the 'Export to other DAW' dialog.
* Solved an issue where MIDI notes could be drawn outside of the clip.
* Selecting a subdirectory in the instrument selection dialog could cause a crash. Solved.
* Solved a crash after arming a pure MIDI track when the input was set to 'Virtual keyboard'.
* Scan for BT MIDI devices didn't work anymore. Solved.
* Solved a freeze when loading a project with a freezed track with more than 2 Fx Sends.
6.8.7 2025/04/01
* Added the Neural Amp Modeler (NAM) to the AMP effects, letting you play and record through highly accurate digital models of real guitar amps, pedals and complete rigs. Load NAM files, combine them with speaker-cabinet impulse responses (IRs), and shape the sound using input, gate, tone and output controls. Note that NAM processing is very CPU-intensive.
* eXtream Software Development has integrated with TONE3000 to give you access to a massive library of Neural Amp Modeler (NAM) captures and IRs of real analog amps, pedals and cabs created by a global community of musicians. Browse the TONE3000 catalog from within the effect, view tone images and details, select model variants and load them directly into the appropriate pedal, amp or cabinet section.
更多 版本 7.3.5 15小时前
未收集数据 开发者不会从此 App 中收集任何数据。
