Audiofusion Performer
音乐
免费
By receiving real-time audio over Wi-Fi and playing it through your ear phones, Audiofusion Performer turns your iPhone into a wireless in-ear monitoring system.
Plus, Performer is a complete monitor mixer, giving you complete control over the sound in your ears. Adjust the volume, panning and labeling of each audio input to create your personalized mix.
Performer receives its audio from our Audiofusion SoundCaster app, which runs on MacBook.
SoundCaster connects to your digital audio source and broadcasts it in real-time over Wi-Fi to each connected Performer. Performer will only receive audio from Audio Fusion's SoundCaster software.
Performer and SoundCaster work in conjunction with a third app for iPad called Audiofusion Director. It can be used by the sound technician or monitor engineer to hear the mix each musician has on their Performer. Director gives you simultaneous control over each musician's mix to help with troubleshooting and fine-tuning. With it, you can also edit the instrument labels and remotely control the audio settings on SoundCaster.
更多 设置较为简单 但没有视频详细教学* 盲测试结果苹果8、ipad 测试可用（ip为自动获取、连接后较稳定 ） 但对路由器 要求较高
设置较为简单 但没有视频详细教学* 盲测试结果苹果8、ipad 测试可用（ip为自动获取、连接后较稳定 ） 但对路由器 要求较高
Fixes an issue where Performer may crash if one or more of its channel labels begins or ends with spaces.
1.3.9 2020/02/09
- Pan controls for each instrument channel are now located with each fader control, for ease of use.
- Haptic feedback and a widened center notch have been added, along with double-tap, to make the center pan position easier to locate.
- If the iPhone volume is not set to maximum when Performer starts, a warning is now displayed.
- Addresses an issue where noise was heard when only 1 Performer with < 11 channels was used.
- General stability and performance enhancements.
1.3.8 2020/01/30
Sends alerts to SoundCaster when Location Services are enabled.
Fixes nonlinearity (sudden drop-off) of Master/Band/Me faders.
Performance enhancements and stability fixes.
1.3.1 2019/07/07
Update to keep version synchronized with SoundCaster.
1.2.2 2019/02/22
* Addressed an issue where Performer was not connecting to Wi-Fi in some geographies, such as those that offer a "dual SIM" feature.
1.2.0 2019/02/15
Updated version to match SoundCaster.
1.1.3 2018/12/28
Updated version number per the most recent SoundCaster update.
1.1.2 2018/11/08
Updated version to keep in sync with SoundCaster.
1.1.1 2018/11/04
This version supports the performance enhancements and new "Gear Test Mode" in SoundCaster. For best results, use this version of Performer with SoundCaster 1.1.0.
1.1.0 2018/11/01
This is the first production release of Audiofusion Performer. It must be used with the same version of SoundCaster. However, it may be used with the Beta version of Director, until Director is released for production.
1.0.0 2018/08/03
* Adds a prototype panel to SoundCaster for device connection management. This has the main controls needed for controlling whether each Performer or Director on the network is licensed to connect to the system and receive audio streaming. By default, all Performers and Director are enabled for connecting, as with previous releases. This behavior will change once in-app purchases of connection licenses is implemented.
* Improves system responsiveness to network disruptions.
* Improves SoundCaster's responsiveness to disabling/enabling inputs through its user interface. Also reduces the noise caused by the same.
* Changes SoundCaster's Input Device menu to allow only 1 device to be selected at a time since SoundCaster does not support concurrent devices.
* Fixes an issue on SoundCaster when connected to a mixer that provided >32 channels: only the first 32 channels were displayed.
* Fixes an issue on SoundCaster where only the first 16 inputs could be monitored on SoundCaster.
* Fixes an issue on SoundCaster when connected to a Yamaha TF series mixer where the mixer would display a USB sample rate error, and the audio was distorted or at the wrong pitch.
* Fixes an issue where Performer would sometimes not update the musician's name nor their mix settings after restarting.
* Fixes an issue on Director where selecting "No Device" in the Edit Musician view did not remove the previously assigned device's name from the "Select Device" button.
* Fixes an issue on Director in the Audio Input view where, after disabling and re-enabling an input, its instrument and musician labels both disappeared, leaving only the input label.
* Fixes an issue on Director where musician photos were no longer selectable. Note that musician photo selections are not yet stored on Director.
* Fixes an issue on Performer, Director, and SoundCaster where the audio meters were not returning to minimum, upon audio streaming being stopped.
0.0.14 2018/06/25
* Fixes an issue on macOS 10.13.5 where SoundCaster may not detect input devices.
0.0.13 2018/06/10
Updated functionality includes Persistent Storage on all three apps.
Fixed issues with alert icons always showing for a disconnected Performer.
Fixes an issue with label created off-line were not showing up upon connection.
Fixed an issue where default labels were not propagating.
0.0.12 2018/05/20
- Fixed an issue where the alert icon for a disconnected Performer was always showing on each Performer in the Stage Plot view.
- Fixed an issue where Director's instrument controls did not update when changed on Performer, if no SoundCaster was connected.
- Fixed an issue where input labels that were edited on SoundCaster offline were not updating on Director after connection.
- Fixed an issue where input label edits were not propagating to Director and Performer as default instrument labels.
0.0.10 2018/02/16
- Fixed issue where audio from iPhone 8 speaker or headphones and iPhone 7 speaker had crackling noise in it.
- Fixed issue with audio disruptions caused by occasional networking disruptions related to the integrated bug reporting framework.
- Fixed issue with the Musician's Mix view where the list of active instruments was not updating when changed by the Director.
- Fixed issue where Performer and Director weren't being detected by SoundCaster, if either one of them was running when the other started up.
- Fixed issue where level meters did not align with the 0dB mark in the bar graph (also in Director and SoundCaster).
0.0.9 2018/02/08
Fixes an issue where Performer may crash if one or more of its channel labels begins or ends with spaces.
更多 版本 1.3.9 2020/02/09
未提供详细信息 开发者下一次提交App更新时将需要提供隐私详细信息。
