Panoploid
摄影与录像
免费 · App 内购买 · 专为 iPad 设计。未针对 macOS 验证。
Panoploid is an E-Multimedia Composer and an interactive Player.
Panoploid is the iPhone version of Panoply for the iPhone.
Create your business card, greeting card, next panoramic photo, ipod playlist, party invitation with directions, travel book with audio/video, executive multimedia presentation, art sketches, music video album with cover art: all on the iPhone.
Device Requirements:
This application runs only on iPad 3 or higher.
Similar to E-book, in addition to text and image, you can composite maps and graphics and add 'On Touch Do'(OnDo) directives on composites to play audio, video, show another image or display a web page. Such composites are collectively, in general, referred to as 'Composite(s)' below.
Composite library can be searched on: location by address, latitude/longitude, or a caption.
Share the composite image via e-mail or Bluetooth in multimedia rich proprietary format, or as a PDF, or image.
Panoploid also helps you capture panoramic views by automatically positioning, sizing and orienting individual photos(max 5) approximately.
Composites can be edited on the spot while capturing or any other time later.
A set of composites s can be collected in a 'Portfolio' and saved.
Panoploid manages all of your media resources optimally without duplicating them if possible.
Panoploid does not force a workflow or a method. Any moment during capture or creation or modification is the same as any other and all operations are available all the time.
Panoploid stores content in a device independent format. This currently means that whenever a composite is edited, modified, and stored back, the changes are applied on the original to maximize the resolution of the result. Looking ahead, it means that should we release Panoploid on devices with higher resolution, your current content can be presented on the device with the device native resolution.
Panoploid uses database technology to store the contents. Therefore it is fast, responsive and, searchable.
Panoploid is built 100% on native iPhone technologies: there are no other third party software or software ported over from other platforms.
In Panoploid, what a gesture means is determined by context(graphics, maps, etc.,)as well as settings. This prevents us from having to invent arbitrary distinct gesture for each operation. But it also means that one needs to be aware of the context and settings that might affect a gesture. For example, in graphics workspace, you can create a rectangle, an ellipse, a filled rectangle or, a filled ellipse all with two touches. What gets created depends on the settings.
Therefore, we strongly recommend that you at least cursorily go through the 4 pages of info before starting in order to be more productive as well as for a better experience at:
http://www.ipanoramii.com
For questions/comments e-mail: info.protolys@gmail.com.
Quick Reference:
Deletion:
In Composite workspace, pressing trash button lets you either delete an individual item or all of them depending on mode.
Gestures
Zoom is available in all tabs when appropriate.
Rotate: Keep one touch fixed and move the second touch around.
Frame: Move two touches a distance apart horizontally or vertically on the composite in edit mode in the Composite tab.
Drag with single touch
Graphical gestures
Line:
Two simultaneous touches for the two end points of the line, in open, non-smooth mode.
Rectangle: Same as for a line in closed mode.
Circle and ellipses: the touches for the rectangle which will inscribe it in closed mode.
Filled figures: Same as for closed figure with 'Filled' setting ON.
Track mode: Tracks the touches and create a series of geometries.
On a Composite in the Library:
Right swipe: Sends(via e-mail or bluetooth).
Left swipe : Moves it to the Composite tab.
Single touch on an item in Library will toggle between the composite and its image super imposed on the world map..
Pressing the target corner again to delete it.
更多 Update for iOS 17. The app had some of the functionality broken in the recent iOS releases: Camera capture, Multimedia replay, many general navigation were also broken. Maps and compositing of map snapshots were non functional due to new Google maps requirements. Attaching filter crash fixed. These are now fixed. General performance improvements.
10.0.21 2023/10/24
Update for iOS 17. The app had some of the functionality broken in the recent iOS releases: Camera capture, Multimedia replay, many general navigation were also broken. Maps and compositing of map snapshots were non functional due to new Google maps requirements. Attaching filter crash fixed. These are now fixed. General performance improvements.
10.0.0 2023/10/17
AirPrint a composite or a Portfolio from the Library(right swipe on the item and choose the print option)
Previously
—————
Copy/paste: touch on the composite workspace. If the composite has content, Select, SelectAll, Copy are available.
Printing: In the composite workspace, Send shows an option to send to Printer
Release note is available in the 'Contact' workspace.
- When sending portfolio or composite in panoply format
the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression.
- Media on annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
9.1.14 2018/09/18
Copy/paste: touch on the composite workspace. If the composite has content, Select, SelectAll, Copy are available.
Printing: In the composite workspace, Send shows an option to send to Printer
Limits of number of images while compositing is practically removed.
Release note is available in the 'Contact' workspace.
Bug fixes: Graphics lower toolbar was not avaliable.
Previously
—————
- When sending portfolio or composite in panoply format
the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression.
- Media on annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
9.1.1 2018/09/06
Bug fixes
Previously
—————
- When sending portfolio or composite in panoply format
the image compression level can be set with Settings(‘S’) -> PDF settings -> Image compression. The default is maximum compression.
- Support for sending the single composite in Panoply format from the 'Composite' tab.
- Media can now be attached to annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
8.0.800 2018/04/19
When sending portfolio or composite in panoply format(with multimedia),
the compression level for all its images/photos
can be set with Settings(‘S’) -> PDF settings -> Image compression.
The default is maximum compression. This significantly reduces the size
of composites and portfolios to be sent.
Previously
----———
- Support for sending the single composite in Panoply format from the 'Composite' tab and from the library
- Media can now be attached to annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
8.0.88 2018/04/10
Bug fixes
---------
- Geolocation display on map in the composites roll for composites created from now on.
- Composite roll now scrolls to latest composite/portfolio when a new one is added.
Previously
----------
- Media can now be attached to annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
8.0.86 2018/02/13
Bug fixes
---------
There were many issues with media on ‘Note’s. Especially with a
note that had media attached but the component the note is attached to itself didn’t.
Re-edit and re-save if you have issues(just bring it to composite workspace, press edit, press save).
Previously
----------
- Media can now be attached to annotations('Note')s.
- Since multiple notes can be attached to a component, multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick dimension modification)
8.0.82 2018/01/14
- Media can now be attached to annotations('Note')s.
- Since multiple notes can be attached to a component(just touch Note button to turn it on and touch the place
where you want to put the note, type. You may want to switch Note off at the end. If you put the Note on top of
a component, it gets associated with it and will move with the component), multiple media attached via corresponding
'Note's can be associated with a component.
- You can still attach a media to component itself in addition to the media associated with its notes.
- A media attached to a note by default plays in the area of its associated component. However, it(primarily video) can specified to
be played in the note itself or in full screen as well, via the Note's detail info.
From previous versions
------------------------
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
8.0.80 2018/01/01
Bug fixes:
----------
- Previously Filter attached to the composite as a whole was not rendered correctly when saved.
- Note was previously not rendered correctly if it was attached to one of the components instead of composite as a whole.
If you have either of the issues in your current composite, re-edit and re-save to fix the issues.
From previous versions
------------------------
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.787 2017/12/04
Bug fixes:
----------
- ´Note’ previously was not rendered correctly in the saved composite.
If you previously created a composite with the issue, re-edit and re-save to fix the issue.
- Portolio ‘go to’ particular sheet(by tapping on the current sheet number in portfolio bottom tool bar
and entering the sheet to go to) didn’t previously scroll thumbnail roll to center the chosen sheet.
From previous versions
------------------------
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not chosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.786 2017/11/27
When you add(‘+’) one portfolio to another, now there is additional option: ‘Index To’.
‘Index To’ is the same as previous ‘Navigate To’. ‘Navigate To’ option now has a back navigation arrow in the navigation bar
allowing you to navigate back to the previous portfolio. When you switch portfolios by either navigation or indexing, the smooth scroll
or left and right transitions are set to those of the destination portfolio as well.
The portfolio scroll settings(’S’ -> Portfolio -> Smooth Scroll section) for the current portfolio are saved whenever changes are made.
Currently, Portfolio left and right transitions(when smooth scroll is not choosen) are not saved when you make changes to it. However,
there is a workaround to save it: just switch on the Smooth scroll and switch it back('off).
Bug fixes:
————-
When portfolio smooth scrolling is enabled, selecting a composite in thumbnail now scrolls the content to the correct composite sheet.
Setting the current page number in the bottom toolbar in portfolio in portfolio scroll mode also works.
From previous versions
------------------------
Portfolio navigation has additional option : NavigateTo to index to another portfolio
Selection of color from photo is now incorporated into the color picker.
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.784 2017/10/26
Navigation from one portfolio to another: when inserting one portfolio to another, there is an additional 'Navigate To' option. Touching the composite for the inserted portfolio navigates to that portfolio. Currently, there is no automatic 'back' to go back to the previous portfolio.
Therefore the mechanism is more like an index. However, you can use the same mechanism to navigate from a particular composite in the destination portfolio to the original portfolio.
Bug fixes
---------
Crash while compositing graphics.
From previous versions
------------------------
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of theirFor portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification) creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
7.8.78 2017/09/25
For portfolios, smooth horizontal scrolling for going to previous or next composite is set as the new default.
Previously created portfolio will continue to have left and right transition animations as at the time of their creation.
New portfolios created will have smooth horizontal scrolling. You can change the behavior to vertical scrolling or
animation effects by selecting those via settings: S->Portfolio->Right transition, Left transition, Smooth scrolling(horizontal or vertical).
Bug fixes
---------
Non-paint graphics that are created(lines, circles, filled, unfilled) were not rendered until composited. This is now fixed.
From previous versions
------------------------
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.74 2017/09/15
The following Graphics paint mode bugs are fixed:
- Eraser left marks of erasure.
- Brush strokes of different colors lost original color once incorporated into the composite workspace.
If you had previously created composite with the above issues, you can bring them to composite workspace, press edit, the graphics paint should fix itself,
then save.
Known issue:
Non-paint mode graphics does not render when drawn. However, it does appear when composited into composite workspace.
From previous versions
------------------------
A new Paint mode with air brush texture is available for graphics. In order to activate it, press
the ]Paint[ button in the graphics bottom
toolbar. To deactivate paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ]Erase[ button. To deactivate erase, press the same button when it is titled '[Erase]'.
The settings for paint brush(color, size) is available under Settings -> Graphics.
The brush size is interpreted as eraser size when in [Erase] state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.73 2017/09/07
Improved paint mode. Brush size for paint mode can be larger and interpreted in a screen size and resolution independent way so that same brush size looks same width on different iOS devices during creation.
From previous releases
-----------------------
A new rudimentary paint mode with air brush texture is available for graphics. In order to activate it, press
the ']Paint[' button in the graphics bottom toolbar. To deactivate this paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ']Erase[' button.
To deactivate erase, press the same button when it is titled '[Erase]'.
The setting for paint brush(color, size) is available under Settings('S') -> Graphics.
The brush size is interpreted as the eraser size when in the '[Erase]' state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where the composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting, which is kept in 'vector' format within the app but may not be when exported to other formats, and hence may not scale well when zoomed, or lose resolution on larger screens, or on screens with higher resolution than where the composite was created.
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.72 2017/08/31
A new rudimentary paint mode with air brush texture is available for graphics. In order to activate it, press
the ']Paint[' button in the graphics bottom toolbar. To deactivate this paint mode, press the
same button when it is titled '[Paint] '.
Erase for paint mode is available when paint mode is on. In order to activate erase, press the ']Erase[' button.
To deactivate erase, press the same button when it is titled '[Erase]'.
The setting for paint brush(color, size) is available under Settings('S') -> Graphics.
The brush size is interpreted as the eraser size when in the '[Erase]' state.
Previous methods for drawing lines, arcs, closed figures are still available. These are recommended for situations where the composite is converted to PDF as these are rendered as 'Vector graphics' as opposed to painting, which is kept in 'vector' format within the app but may not be when exported to other formats, and hence may not scale well when zoomed, or lose resolution on larger screens, or on screens with higher resolution than where the composite was created.
Bug fixes
---------
- Send image from composite workspace.
- Graphics bottom toolbar was sometimes unavailable.
From previous versions
------------------------
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.8.7 2017/07/27
Better and more precise blend modes: when blend is specified on a component, blend is applied only to the extent of the component.
When PDF is chosen as the format to send, blend info is preserved in the PDF.
Bug fixes:
----------
Crash when setting filter on composite as a whole is fixed.
Native resolution of a composite is preserved as much as possible in different contexts.
From previous versions:
-----------------------
PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to replace current.
New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7125 2017/07/06
Bug fixes:
----------
The orientation of a composite or portfolio in the library is fixed. You can change the orientation if need be.
The changed orientation is properly remembered.
From previous versions:
-----------------------
PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to replace current.
New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7124 2017/06/06
Note:
-----
Panoploid will be discontinued. Please use latest Panoply app instead on iPad.
Bug fixes:
----------
Portfolio : replace current composite crash fixed. Also when composite is added to a Portfolio by 'Done' in composite workspace,
it is made the current sheet.
PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to insert the updated composite left or right. Delete the previous composite.
Known issue:
-------------
The orientation of a composite or portfolio in the library may not be proper. The orientation can be changed: touch on
the composite/portfolio. The composite is
displayed on top of a map. The lower right
corner has a rotate button. Each touch on it
will rotate the view of the composite in the library by 90 degrees, once the map view is dismissed by touching on the map again.
From previous versions:
-----------------------
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7122 2017/06/01
Bug fixes:
----------
PDF generation and send is now re-enabled. In order to regenerate true PDF for any composites that currently have PDF as just a wrapper for the composite as an image, edit and save the composite. For portfolios with composites that are just image wrappers, choose to edit the particular composite in Portfolio, choose edit in composite workspace, press done and choose to insert the updated composite left or right. Delete the previous composite.
From previous versions:
-----------------------
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7121 2017/05/30
Bug fixes
---------
Compositing and manipulation of images on iPad Pro.
From previous versions:
-----------------------
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
Bug fixes:
————-
Color chooser was broken on iPad. This is fixed.
Thanks to developer updates from Apple, this release re-instates saving and sending composites as PDF.
This also means composites will be presented in landscape in the composite roll.
You can update the composite to the pdf format by ‘edit’ing it and saving it(i.e., bring it to the composite workspace,
edit, save).
Known Issue:
——————-
Color value components can not be set to 255(0xFF). Max value it can be set to is 254(0xFE). If it is set to 255,
the app modifies the value to 254. This is due to underlying iOS issues which render color gray at 255. We will
make an updated release if and when it is fixed in iOS. Note that the color depends on the ration of color values
and not so much on the value itself. So, this affects only a very small fraction of all available colors.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7119 2017/04/24
Ability to change display orientation of the composite/Portfolio in the library.
When you touch on a composite in the library, a rotate button is now shown on the lower right corner in the map view.
Each touch on the rotate button will rotate the composite by 90 degrees in the clockwise direction *once the map view is dismissed*
in the library.
Color range for red, blue, green is reverted to 0-255. Currently true PDF sending is disabled. PDFs essentially an envelope
for images. However, all design information is stored in vector format. We will re-enable true PDF format once the underlying issues
are fixed.
-- From previous versions
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7117 2017/04/18
Note
----
If you had previously downloaded version 7.7.7115, and had images in the composite,
these would have shown up as gray patches in the saved composite in the library.
You can re-edit and re-save them with this version to recover images.
Enhancements:
---------------
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
Bug fixes:
————-
Color chooser was broken on iPad. This is fixed.
Known Issue:
——————-
Color value components can not be set to 255(0xFF). Max value it can be set to is 254(0xFE). If it is set to 255,
the app modifies the value to 254. This is due to underlying iOS issues which render color gray at 255. We will
make an updated release if and when it is fixed in iOS. Note that the color depends on the ratio of color values
and not so much on the value itself. So, this affects only a very small fraction of all available colors.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7.116 2017/04/05
(1) New additional Color Chooser(‘Swatch, Hex, Slider’) lets you choose color by color
‘swatch/color blocks’, by name, hex or decimal color code, or using red, green, and blue color sliders.
When you touch ‘Color’ button for any item in the Settings(’S’), the two options are presented: previous (Red,Green) and Blue color chooser, or the new color chooser.
The new color chooser also lets you ‘sort’ colors presented by name, hex value, or ‘original’ random order.
Setting a value for the color updates other selectors in the new color chooser to the corresponding
same color value — including scrolling the color swatches to so as to the this color be in the first row.
The new color choosers are supported in the individual component inspector(‘i’)
On iPad, dismiss the color chooser by pressing ‘Done’. Dismissing by just tapping outside the setting popup will not set the color.
(2) Portfolio smooth scrolling
Portfolios now support smooth scrolling. Scrolling can be set to be either vertical or horizontal.
Smooth scrolling is enabled via Settings(’S’) -> Portfolio -> Smooth scroll-> On.
When smooth scrolling is enabled, Portfolio left and right transition effects(In Settings(’S’) -> Portfolio ->
Right or Left transition) won’t be applied(since they can not mean anything)
Bug fixes:
————-
Color chooser was broken on iPad. This is fixed.
Thanks to developer updates from Apple, this release re-instates saving and sending composites as PDF.
This also means composites will be presented in landscape in the composite roll.
You can update the composite to the pdf format by ‘edit’ing it and saving it(i.e., bring it to the composite workspace,
edit, save).
Known Issue:
——————-
Color value components can not be set to 255(0xFF). Max value it can be set to is 254(0xFE). If it is set to 255,
the app modifies the value to 254. This is due to underlying iOS issues which render color gray at 255. We will
make an updated release if and when it is fixed in iOS. Note that the color depends on the ration of color values
and not so much on the value itself. So, this affects only a very small fraction of all available colors.
See also:
---------
Please go through the version history for information about blending and filters since this is the
only place this info is currently available, in particular for 7.7.7111(blending and media attachment to
the whole composite), 7.7.773(blend modes), 7.7.7(Panoply cloud),
and 7.6.75(Image filters), 7.5.75(quick component dimension modification)
7.7.7115 2017/04/03
Update for iOS 17. The app had some of the functionality broken in the recent iOS releases: Camera capture, Multimedia replay, many general navigation were also broken. Maps and compositing of map snapshots were non functional due to new Google maps requirements. Attaching filter crash fixed. These are now fixed. General performance improvements.
更多 版本 10.0.21 2023/10/24
未收集数据 开发者不会从此 App 中收集任何数据。
