SimplComp
音乐
¥15.00
Introduction
SimpleComp is very simple general purpose compressor that’s easy to use and very light on CPU. Sometimes you just need some basic dynamics processing that doesn’t add “character”, or that relies on sophisticated techniques or performance expensive DSP.
SimplComp was designed for those times!
SimpleComp is an AUv3 effects plugin that can run standalone, or in any AUv3 compatible host such as Logic Pro, GarageBand or AUM. SimpleComp currently runs on iPadOS / iOS (iPad & iPhone) and macOS (Intel & Silicon) and is available as a Universal Purchase from the Apple App Store.
If you’re planning on using SimpleComp on Mac / desktop, please ensure that your favourite DAW / host supports AUv3 (not just AU).
Parameters
ACTIVE - toggles the effect on or off.
IN - sets the level of the incoming signal. Typically you would leave this as 0dB, i.e unity gain. The meters to the left of the panel show the level of the incoming signal.
COMP - sets the compression threshold. Note that unlike many compressor plugins, the threshold is reduced as you turn up the control, so as you turn it up, you get more compression effect. The bar meter below this control will give an indication of how much over the threshold the input signal is.
RATIO - sets the compression ratio. A higher ratio results in a more noticeable “squashing” effect on the signal.
OUT - sets the level of the output signal. You may need to adjust this is you wish to manually make up the gain lost by the compression effect, e.g. when AUTO is off (see below).
ATK - sets the attack time of the compressor.
REL - sets the release time of the compressor.
AUTO - toggles automatic makes gain. When switched on, SimplComp will automatically adjust the gain to compensate for the gain reduction that occurs when compression is applied. This is calculated using the compression threshold and ratio.
MIX - sets the balance between the compressed and original / dry signal. This allows SimplComp to be used for parallel compression.
Factory Presets
There are a few factory presets included to get you going. The overall compression will be dependent on the level of the input signal so you will need to select an appropriate factory preset as a starting point, then adjust the COMP parameter up or down for more or less compression indicated by the bar meter below the control.
评分及评论
- 此 App 尚未收到足够的评分或评论，无法显示整体评分。
开发者“Rob Jackson”已表明该 App 的隐私规范可能包括下述数据处理方式。更多相关信息，请参阅 开发者隐私政策 。
未收集数据
开发者不会从此 App 中收集任何数据。
辅助功能
开发者尚未表明此 App 支持哪些辅助功能。 进一步了解
信息
- 提供者
- Rob Jackson
- 大小
- 18.4 MB
- 类别
- 音乐
- 兼容性
设备需装有 iOS 13.0 或更高版本。
- iPhone
设备需装有 iOS 13.0 或更高版本。 - iPad
设备需装有 iPadOS 13.0 或更高版本。 - iPod touch
设备需装有 iOS 13.0 或更高版本。 - Mac
设备需装有 macOS 11.0 或更高版本。
- iPhone
- 年龄分级
4+
- 4+
- 版权
- © 2026 Rob Jackson
