HamChat: Morse Decoder

Dienst­programme

Kostenlos · In-App-Käufe

HamChat is a free Morse Code decoder and encoder. Think fldigi, made simple, made for your iOS device. It's a IRC-style chat app that sends and receives text messages as modulated audio, using real ham radio digital modes. Type a message, press Enter, and it goes out your speaker as Olivia, PSK31, MFSK, or Morse code signal. Anyone listening decodes it and sees your text appear in real time. DIGITAL MODES PSK31 -- The modern classic. Phase-shift keying at 31.25 baud. Fits in just 31 Hz of bandwidth. Efficient Varicode encoding means common letters transmit faster than rare ones. The gold standard for keyboard-to-keyboard ham radio chat. PSK63 -- Same as PSK31 but twice as fast. Use when you have bandwidth to spare and want snappier conversation. MFSK16 -- Multi-frequency shift keying with forward error correction. Decodes reliably at signal levels below the noise floor. The robust choice for difficult conditions. CW / Morse -- The original digital mode, since 1895. On-off keying of a single tone with adaptive speed detection. HamChat auto-detects incoming CW speed from 5 to 40 WPM. CW transmit is free -- no purchase required. Olivia -- Like MFSK, extremely resistant against fading or channel noise. MULTI-STREAM DECODING Monitor up to 8 frequencies simultaneously. Each channel gets its own color-coded tab in the stream bar. Click the waterfall to tune. Messages from all channels appear interleaved in the chat log so you never miss a QSO. WATERFALL DISPLAY Real-time FFT spectrogram shows signal activity before text appears. See PSK31 as a narrow bright line, MFSK16 as a bouncing tone, CW as dit-dah patterns. Click anywhere to set your TX frequency. SYSTEM AUDIO INPUT (macOS only) Decode directly from webSDR, SDR software, or any other audio source without hardware. Uses ScreenCaptureKit to tap all system audio output -- bypasses the built-in mic's noise cancellation entirely. HOW TO USE Note that the noise suppression algorithms on modern Apple devices will fight you when transmitting data over audio. A CW or PSK signal sounds like noise, and not like a human voice, so the MacBook, iPhone or iPad dutifully tries to filter it out. It's highly recommended to use a cheap USB-C sound card to receive and transmit. Across a room: One device transmits through speakers, another listens on the mic. No radio needed, no license required. With a radio: Connect via USB audio interface for clean digital audio. HamChat becomes a full digital mode terminal for your transceiver. From the web: Use System Audio input to decode live signals from webSDR receivers around the world. THE VIBE Hackerman aesthetic. Amber phosphor text on anthracite black. Monospace everything. Think 1985 BBS terminal that somehow has a waterfall display. TECHNICAL DETAILS - Native Swift/SwiftUI -- no Electron, no web views, no external dependencies - Apple Accelerate/vDSP for all DSP and FFT processing - Costas loop carrier recovery with AFC for PSK modes - Rate-1/2 convolutional FEC with Viterbi decoder for MFSK16 - Adaptive CW speed tracking with bimodal histogram classification - 44100 Hz sample rate, real-time processing PRIVACY No accounts, no analytics, no network calls, no tracking. Audio is processed locally in real time. Nothing leaves your device... except the audio you transmit. PRICING Receive on all modes: free, always. CW transmit: free, always -- it's the OG mode. PSK31/PSK63/MFSK16 transmit: one-time purchase. Built by a ham radio operator. 73!

Bewertungen & Rezensionen

  • Diese App hat noch nicht genügend Bewertungen oder Rezensionen erhalten, um eine Übersicht anzuzeigen.

- added a TTY mode - fixed some audio device selection bugs

Version 0.4

Das Entwicklungsteam, Jeroen Rombouts, hat darauf hingewiesen, dass die Datenschutz­richtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklungsteams .

  • Keine Daten erfasst

    Der Entwickler erfasst keine Daten von dieser App.

    Die Datenschutzpraktiken variieren beispielsweise abhängig von den verwendeten Funktionen und von deinem Alter. Weitere Infos

    Bedienungshilfen

    Der Entwickler hat noch nicht angegeben, welche Bedienungshilfen diese App unterstützt. Weitere Infos

    Informationen

    Größe
    • 3 MB
    Kategorie
    • Dienst­programme
    Kompatibilität
    Erfordert iOS 17.0 oder neuer.
    • iPhone
      Erfordert iOS 17.0 oder neuer.
    • iPad
      Erfordert iPadOS 17.0 oder neuer.
    • Mac
      Erfordert macOS 15.0 oder neuer.
    • Apple Vision
      Erfordert visionOS 1.0 oder neuer.
    Sprachen
    • Englisch
    Altersfreigabe
    4+
    In-App-Käufe
    Ja
    Anbieter
    Jeroen Rombouts
    • Jeroen Rombouts hat sich als Händler für diese App ausgewiesen und bestätigt, dass dieses Produkt oder diese Dienstleistung dem Recht der Europäischen Union entspricht.
    • Adresse
      Strange Loop Software
      Postbus 3035
      2601DA Delft
      Niederlande
    • Telefonnummer
      +31 634915704
    • E-Mail
      info@strangeloop.nl
    Copyright
    • © Strange Loop Software
  • Datenschutz

    • Unterstützt

    • Familienfreigabe

      Einige In-App-Käufe und Abonnements können möglicherweise mit deiner Familie geteilt werden, wenn die Familienfreigabe aktiviert ist. Weitere Infos

    Mehr von Jeroen Rombouts

    Das gefällt dir vielleicht auch