• Bug fixes

Circular Sampling - get the perfect take. Loops input when Sampling In or Resampling, so on dropping out last take is retained. See Mode page to enable) Audiobus sidepanel - control playback and start/stop recording into Jamm Pro from other IAA enabled apps. Remember to arm, defaults to Channel 4 slot 8 during Circular Sampling unless you have a selected clip slot in Jamm Pro. BPM nudge - hold and drag left or right on BPM value to nudge BPM up/down by 5% till you release your finger (simulates turntable nudge) BPM Semitone shift now on tone arrows in BPM menu FineAdjust BPM now works in PerClip and Repitch All Instant Play (when Link is off), to help synch with eg decks Beats+Pieces timestretch mode - Channel 1 is in Beats, Channels 2-4 in FFT for smooth beat shuffling melodic magic. Improved UI scaling for Dynamic Island on iPhone Jumpstart for Clip Waveforms on Clip Page, update the clipstart location with a tap, can be quantized to 16ths or dynamic based on clip length (See Settings) Stem Recordings now feature channel names. Sampling in - Set Recording type to Phase (Correction) or Normal Scope Visualiser now captures live input when Monitoring is active. Various Bug Fixes and improvements.

• Add Basic mode, which allows new users to explore the core functionality of Jamm Pro while the more advanced functions are a toggle away, ready to be discovered once the basics of the interface have been mastered. (Basic Mode toggle switch is located in Settings page.) • Various bug fixes and enhancements.

• Add "Init Recent Set" option in the Settings page. When enabled, the most recently used Set is loaded when launching Jamm Pro, instead of the store. • Add "Auto Play" option in the Settings page. Enable this option to automatically start playing a set once it loads. • Add Intro Help Screen for the first 2 uses of app.

• Add Clip trim render start point nudge buttons in TRIM panel. • Add native audio output route selector in Settings page. • Auto Download Set purchases • Improved ZIP Set Import functionality • Bugfixes big and small

-iPhone support -Bluetooth output support -SHAKE your device to trigger Superfills -Scope audio visualiser. -Action Sequencer -Share your Jamm with your own artwork -Share as AAC to send your Jamm via Airdrop, email, etc. -Share as Video ready to upload to TikTok, Instagram, Youtube, etc.

-iPhone support -Bluetooth output support -SHAKE your device to trigger Superfills -Scope audio visualiser. -Action Sequencer -Share as AAC to send your Jamm via Airdrop, email, etc. -Share your Jamm with your own artwork

New in version 1.2: • Performance improvements throughout the app. • Add new Width parameter to Master FX, adds Stereo Width. • New adjustable Clip Loop In/Out points. • Adjustable Start point for Clip. • Larger waveform view in Clip panel, waveform updates with Clip vol changes. • New sample Trim function, located in Clip panel. • Delay time now free or tempo synced. • Channel Pitch slider can be locked in place by holding Shift, then release finger from slider. • Channel Pitch slider state can now be saved in a Patch slot. • Many more minor bugfixes and improvements.

• Fix FFT Phase slider was not shown in clip panel when a stab channel voice was set to FFT mode. • After loading a sample into a stabs channel slot, set the slot to gated mode. • Various minor bugfixes Previous versions 1.1 update release notes: The Jamm Pro 1.1 update adds new functionality, improves performance and fixes bugs. Create whole songs using the new Patch edit functions to arrange patches, then playback with the Patch sequencer. • Add copy/paste/insert/delete functions for Patches. • Improved overall stability and optimizations for better performance. • Import multiple samples at once from Files app. • Add Swap function in clip panel to swap two clips slot positions in the clip matrix. • Add Undo Audio option for audio events such as sampling into a slot, loading a sample from Files app, etc. • Add delay width parameter for adjustable width ping pong delay. • Add new "Wes" reverb type. • Master volume now goes to 11. • Fine tune slider controlled parameters by holding shift while changing value. • Increase MaxBars value for sampling and recording to 16 bars. • Cancel sampling if manually disarmed by tapping Rec/Sampling arm button before pre roll countdown ends. • Add Shift + Tap on Load Arrow icon (Record button) after recording to automatically delete the recording you just made. • Change from single tap to double tap a clip or stab to start/stop sampling into that slot. • Change from single tap to double tap a clip or stab to load recording into slot after recording -> load to clip. • Add Shift + BPM arrows while in Repitch All modes shifts the bpm up/down in semitone values. • Add triplets to clip XY drilling. • Improved error handling when loading sets. • Update to latest Audiobus SDK. • Various bug fixes throughout the app.

The Jamm Pro 1.1 update adds new functionality, improves performance and fixes bugs. Create whole songs using the new Patch edit functions to arrange patches, then playback with the Patch sequencer. • Add copy/paste/insert/delete functions for Patches. • Improved overall stability and optimizations for better performance. • Import multiple samples at once from Files app. • Add Swap function in clip panel to swap two clips slot positions in the clip matrix. • Add Undo Audio option for audio events such as sampling into a slot, loading a sample from Files app, etc. • Add delay width parameter for adjustable width ping pong delay. • Add new "Wes" reverb type. • Master volume now goes to 11. • Fine tune slider controlled parameters by holding shift while changing value. • Increase MaxBars value for sampling and recording to 16 bars. • Cancel sampling if manually disarmed by tapping Rec/Sampling arm button before pre roll countdown ends. • Add Shift + Tap on Load Arrow icon (Record button) after recording to automatically delete the recording you just made. • Change from single tap to double tap a clip or stab to start/stop sampling into that slot. • Change from single tap to double tap a clip or stab to load recording into slot after recording -> load to clip. • Add Shift + BPM arrows while in Repitch All modes shifts the bpm up/down in semitone values. • Add triplets to clip XY drilling. • Improved error handling when loading sets. • Update to latest Audiobus SDK. • Various bug fixes throughout the app.

This version includes optimizations for improved audio performance, fixed bugs, and we’ve added two new features to the sub bass synth. More new features and improvements coming in the next update! • Optimizations for improved audio performance. • Add edit bar length of a clip in the clip panel. • Add dynamic mode for subbass synth. • Sidechain key inputs now trigger subbass synth. • Add some automatic fixes for failed audio file loads when loading a set. • Fix bug with incorrect stem length value when exporting to Ableton Live set. • Fix audio session buffer size was not always recalled correctly at app launch under certain conditions. • Various bug fixes.

We've made changes to the GUI color scheme based on user feedback to help make the different modules shown in the main Play screen clearer. Plus, to help you with a musical way to occupy your mind, we have made additional Sample Set content available FREE. • Improved GUI color scheme to make separation of modules on the main Play screen clearer. • Fix MIDI triggering of CCut slot set to Toggle type was not able to be toggled off via MIDI. • Fix 'User' set filtering in store. • Various bug fixes.

We've squashed more bugs, fixed MIDI mapping and triggering for CCut slots, expanded the channel swing behavior to Coldcutter sequences and more. Stay tuned as we'll be rolling out additional updates over the coming weeks! • Fix bug with auto latency compensation for audio input when sampling and recording. • Channel swing now affects Coldcutter sequences. • Channel swing can now be sequenced by the Coldcutter modulation sequencers. • Fix MIDI mapping and control for CCut slots. • MIDI trigger of CCut slots now adheres to slot quantization state. • Add mini keyboard for inputting note value for a Set's root Key in the store. • Fix Clear function in the clip panel would not properly clear the displayed waveform for a clip until manually switching to another clip. • Reset input monitoring to Auto when closing a set. • Fix video previews for sets that are not currently installed on device. • Fix stabs could be incorrectly shown highlighted upon loading a set. • Fix start point slider in clip panel would not reset properly when switching clips under certain conditions, giving the appearance that all clips in the channel were set to that start point value. • Loading a new sample into a clip slot now always resets the clip's parameters. • Various minor bug fixes.

Thanks to all of our new users for making Jamm Pro the #1 music app in the U.K.!  We will be releasing several updates over the coming weeks to fix bugs and optimize, as well as adding some nice new features.  • Add new Auto monitoring option for live input sampling into clips. See notes below for full description. • Fix launching Jamm Pro as an Inter-App Audio effect on iOS 13. (iOS 12 users please launch Jamm Pro first before loading it into an IAA host, for now.) • Sampling into a stab or clip slot by triggering it via MIDI now works correctly. • Lower default input gain setting for sampling. • Add button to return to IAA host when connected as an IAA node. • Fix incorrect displayed bar count after sampling into a clip or stab slot.

• Fix bugs with rapid switching between CCut slot modulation sequences. • Fix bug where resetting a CCut slot's modulation sequence would not correctly reset its clock speed under certain conditions. • Fix bug where channel mixer volume could be incorrectly set to zero when disabling a CCut slot that is currently sequencing channel mixer volume.