v1.26 B179 Fixed an issue where recursing AUv3 plugins in standalone mode could create a possible crash under certain circumstances.

v1.25 B177 Fixed an issue exporting MIDI where iOS was appending .wav onto the end of a file which already had a .mid file extenstion.

Fixed several UI related issues with iOS26, especially cut-off dialogs which was cosmetic but looked bad!

v1.23 B175 Fix for UI issue on some devices using iOS26.1.

v1.22 B174 Fixed toolbar and menu content issue misalignment in iOS26.1 (due to bug in iOS 26.1 was fiine in 26.0)

v1.21 B173 Updated to ensure future iOS compatability. NOTE: Due to changes in iOS an AUv3 can no longer access AudioShare when loaded inside a host application. You can however launch in standalone mode to access the AudioShare features. This is an iOS limitation as the AudioShare requires the use of the openURL() function which is no longer available to an extension.

v1.20 B172 Changed an issue with the pass thru not working as expected (PB071124 - EffectProc)

v1.19 Added drag on drop of files directly to folders in the audio pool. Fixes an issue where the '..' (parent folder) was not at the top of the list when sorting by date.

v1.18 Fixed an issue applying effects to left and right channels of a stereo file. The effect trail was still being applied actoss both channels. v1.17 Added a new Vertical Scaling option to the Settings menu. When enabled you can scale a selection using vertical pinch and zoom. This allows you to raise/lower the volume of either left or right channel by pinching in the upper or lower half of the waveform. To adjust both channels pinch at the centre. By default this option is disabled. Fixed a drag issue when drop mode set to 'Drop In Place' when the editor is empty. Attempted a fix for the Loopy Pro multiple instance crash on session load. Fixed an occasional crash converting files from mono to stereo. Added the ability to sort the Media Bay by date or name (in settings). Added top/bottom sample guide markers in the editor for 0dB.

Added a new Vertical Scaling option to the Settings menu. When enabled you can scale a selection using vertical pinch and zoom. This allows you to raise/lower the volume of either left or right channel by pinching in the upper or lower half of the waveform. To adjust both channels pinch at the centre. By default this option is disabled. Fixed a drag issue when drop mode set to 'Drop In Place' when the editor is empty. Attempted a fix for the Loopy Pro multiple instance crash on session load. Fixed an occasional crash converting files from mono to stereo. Added the ability to sort the Media Bay by date or name (in settings). Added top/bottom sample guide markers in the editor for 0dB.

Added a Low Pass filter to the Delay effect. Added a new Spectrum Analyser module to the Metering Options menu. Added a fade option to the Clipboard -> Merge opertation. Added an experimental Granular based Mutli-Part Vocal Harmonizer. Other minor bug fixes.

Added a new Cross Fade feature to the Operations menu. You can now extract samples with orbit mode. Extracated samples using Particle Engine mode are now perfectly loopable. Fixed issue loading Neon inside Loopy Pro (zero BPM). Added a new updated menu system which allows submenus. Added an option in settings to prevent the Media Bay from being closed on loading of files The border color of a selection now changes when in resize mode.

Added a new Particle mode that uses granular synthesis to turn samples into drones or soundscapes. Particle mode can be controlled via extrnal MIDI using note,s pitch bend and modulation and CC7 for volume. You can also use the orbit mode to create moving textures. Particle mode works on a selection, so you can use in conjunction with slice mode to mark out areas of interest that can be triggered using MIDI. Added a new Create Tail option to the Operations menu. This uses the particle engine to reconstruct tails on samples that have an abrupt end due to slicing. Added scrubbing on the timeline (turn on in settings as defaults to off). Added the ability to extract samples at the cursor position from the Particle Engine window. Updated Help manual. Fixed the importing of ZIP files from Koala issue. Fixed an issue with Flatten Warp that resulted in distorted due to output level being too high. Other minor bug fixes and changes.

Added the ability to apply fine Warp detuning. This is useful when tuning samples before rendering/flattening the sample. Improved touch on iOS15. Scrolling and Zooming are now not so likely to remove selection. Drag operations now uses a more precise UTI type than public.audio which fixes compatability with certain apps such as Sample Crate and Loopy Pro. Fixed some issues with the LaunchPad integration of queued instances flashing mulri-colour. Added a collaborative mode for sharing LaunchPad with Helium (Select from Launch Button Options). Fixed thr issue with the LaunchPad Pro not being recognised. It is now possible to drag folders to and from Media Bay to other apps such as the Files App if supported. This version fixes an issue that may prevent it showing up in the iOS Share Sheet. This version now registers Neon as accepting public.data types and not just public.zip, so you can now import projects from Koala in a similar fashion to Blocs Wave.

Moved Synchro Start from settings to a new 'Launch Button Options' menu Added a new Synchro Start mode 'CLIP END' to the 'Launch Button Options' menu. Added a new Quantize option to the 'Launch Button Options' menu. When settings Audio Monitor, it now prompts to set all instances in an AUM stack. Added a Flatten Warp option to the warp toolbar. Slice information is now extracted from WAV files imported from the Exported Files tab or dropped into the editor using drag and drop. Slice information is written to exported WAV files saved in the Exported Files tab. Added default swipe options to the toolbar buttons to bring in line with Helium. You can now set the entity colour for an entire stack. Fixed the transparent clear icon in the save prompt. Fixed some dialog colour issues in iOS15. Fixed an issue with restoring loop after loading a session. Added a floating Sample Tuner to the 'Metering Options' menu. Fixed an issue with central panning causing a reduction in volume. Added experimental support for the LaunchPad Mini MK3 (this may also work on the LaunchPad X but not tested). Updated Help.

Added the ability to undo to any point in the undo stack. When saving session, all menu options are now saved (including Settings, Launch Options and Recording menu options). Fixed an issue which caused the edit tool to draw outside of the sample bounds. Added a Synchro Start option to the Settings menu for controlling playback of stacked instances on a single AUM channel. Fixed an issue saving metadata to certain none standard MP3 files. Added a pan option to the long press PLAY toolbar. Fixed an error saving slices Fixed a drag/drop naming issue when dragging from the Documents app. Identity Name and Colour are no longer applied by default just in case you already assigned using AUM.

Added an Input selector iin standalone mode (long press 'Web Transfer'). Neon now automatically selects STEREO microphone input if your device supports it and you are on iOS14 or above. Added a new Velocity Sensitivity option to the launch options menu. The Launch button now follows the selected sequence type ( RANDOM, FORWARDS, BACKWARDS etc.) Added a new PAUSE Slice Play mode. This allows you to paise and continue in GATE and other modes. When 'Warp' is active the timeline now represents the WARP BPM and not the host BPM. Re-worked GATE repeat mode (Sequence not KEY) for more synchronized repeats under host. Added the ability to backup AUv3 effect racks using Web Transfer. Updated Help

Fixed an issue with clipboard drag directly to Media Bay. It is now possible to load up to 3 AUv3's at once when apply effects (standalone). Fixes issues with AUv3 effects that require transport feedback while applying effect. You can also save a rack of plugins along with their settings as a '.rack' file. Fixes a potential file saving issue.

Added the ability to load and apply external AUv3 effects in standalone mode. Added a MIDI export button to the slicer bar. This copies a MIDI file to the clipboard, but you can TAP, HOLD and drag to drop the file in other apps. All MIDI note referencing midi notes have now changed the octave to the AUM standard. So MIDI note 0 = C4 Improved the Tape Delay. Added more offbeat options and made the ratios related to the selected bar length rather than beat length. The effects menu is now sorted and effect names simplified. The Auto scroll now retains its value. Added the ability to 'Apply Effect' to selected channels (left, right, both etc. Long press 'Apply Effect')

Added the ability to import folders into Media Bay from the Files App icon. The Snap button in the slicer now snaps to zero crossings as well as other slices. Added new slice sequencing options (RANDOM, FORWARD, BACKWARD, PLAY THROUGH and ROUND ROBIN) to launch options. Added the ability to play slices in reverse mode. Fixed an issue where that instance color and name were being reset when creating a new document. Added reverse as an exposed AUv3 controllable parameter. Fixed an issue restoring a session where slices were not updated properly. Saving as session now prompts to overwrite. Fixed an issue saving to the Audio Pool where you had to press refresh for the files to show up. Fixed an issue where the prompt to save prompt is displayed, even if no changes were made. Renamed the 'Save Slices' button to 'Export Slices'. Removed the seperator between 'Select' and 'Slice' buttons on the left toolbar (since these are a mutually exclusive set). Added a 'Save Defaults' to the Launch Options menu. These defaults are used each time you create a new document.

Added a Auto Sampler to the Slicer Added a deep search facility to Media Bay (pull down search in full screen). Added an input level as well as the output level. (long press PLAY). When changing launch options it now returns to the main menu to make further selections. Estimate Tempo - long press the 'Tap Temo' button in Warp toolbar to estimate and set the tempo. Added code to prevent crash if Neon attempts to display waveforms that outside the range of the edited file. Added an In-Place Record option (long press REC). This positions the cursor at the host position prior to recording and fills any empties and previous samples. Improved slice selection. Added a drag and drop In-Place editor mode to the settings menu. Added the ability to load and save sessions (including slices) to a new tab in the media bay. Added a new Stereo Remix effect for controlling mid and side bands. You can drag and drop audio fragments within the same editor to duplicate sections if 'In-Place' drag and drop is enabled. Backup and restore sessions using the Web Transfer has been added. You can detach the tempo/bpm from the host app by long pressing 'Tempo'.

Added a new Slice mode with stretching/warping capabilities Added a chromatic tuning option on the Warp menu. When enabled incoming MIDI notes either side of the designated launch note effect the pitch +/- 12cents. You can now TAP, HOLD and DRAG (left and right) to change the value of stepper controls (Threshold, Min Time etc.) Added an output level (long press PLAY for play options). Fixed the Cubasis record count-in issue again (different case). Added a loudness measurement option which measures LUFS (EBU R128). Added option to calibrate and set maximum loudness of a sample in LUFS. You can now tap, hols and drag the tempo left and right to make changes. Fixed a possible crash if playing at extreme zoom levels and auto scroll is enabled. Added the ability to import album tracks from your media library (none cloud). You can now edit TAGS on MP3 and FLAC files (long press rename). Added a Monitor option to Settings that allows audio to passthrough. Fixed an issue extracting audio from video. Added a new ONE SHOT option to the Launch Options Mode settings. Extended the Launch Options base note range to 5 octaves. Long Press the 'Slice' button for a shortcut to the Launch Options menu. Long Press the 'MIDI Setup' option to display the MIDI keyboard in standalone mode. Added some fade on the end of samples to avoid clicking when rapidly triggered. Fixed a recording issue where audio input passes through Neon and causes echo or feedback. Fixed a Cubasis issue where Neon starts playing during recording count-in. Fixed a sync issue when muting in cubasis and then unmuting again (in Host Sync mode).

Fixed an issue freezing a track in Cubasis 3. Added an ALL channels to the Clip Launch menu to address issue with random channel issue in GarageBand. Fixed a looping issues when remotely triggering via MIDI in Cubasis. Fixed nonesenve exposed param values displayed in GarageBand. Resorted to GB defaults 0/1. Other minor fixes.

This version allows the user to select the inpu trecord channel (long press Rec). If using WARP mode Neon should now maintains loop selection during tempo change correctly. Added a new ducking / sidechain feature with multiple input selection and monitor. Added a new Movie button to Media Bay with audio extraction and attach to video options. Fixed a cut issue that didn't also copy to the clipboard. Fixed a drag drop issue. When dragging from the 'Exported' tab to the editor. Fixed an error message that appeared whenn applying effects in Sync mode. Other small bug fixes.

v1.01 Added a Tone Generator module. Added an experimental Vocal Auto Tune. Tweaked the reverb for better control. Effects are now cantered on screen when the interface scaling is set. The more menu now tiles icons into a square if they won't fit. Toolbars have scrollable content if there is not enough screen space to display. Items in the more menu now honour long press and drag. Added output bitrate selection for M4A. You can now export as 16/24bit WAV format. Added Latency Compensation to Pitch Shift and AutoTune. Fixed an issue when dragging and dropping from the Clipboard button. Added a compressor module with lookahead for transients. Added an option to launch options for triggering loops immediately rather than at the next bar. Fixed a possible crash if you do not run in standalone mode prior to using as AUv3. Now supports slide over and split screen modes. Other minor grammatical error fixes.