OrbitDeck

Dienst­programme

Kostenlos · Entwickelt für iPad. Nicht für macOS überprüft.

OrbitDeck is a complete amateur-radio satellite station for iPhone and iPad. It predicts passes, computes Doppler, steers your radio and antenna rotator, decodes the downlink and keeps your log ready for LoTW and awards. It is free, has no ads, no accounts and no tracking, and its source code is open (MIT). TRACK AND PLAN • Live look angles, range, range rate and footprint from current orbital elements (AMSAT, CelesTrak or your own source), computed on your device with SGP4/SDP4. • Next passes with quality scoring, a daily schedule, a pass timeline, all-sky radar, sky plot, ground track and 3D globe. • Automatic satellite switching across up to 9 priority satellites, with a 12-hour simulated plan. • Weather and cloud cover for visible passes, activation reminders, AMSAT status, space weather, workable grids, states and DXCC, and orbital analysis. • Cached data keeps core tracking working offline. NEXT PASS ON THE LOCK SCREEN • A Live Activity counts down to AOS, then shows time left and a progress bar through the pass, on the Lock Screen, in the Dynamic Island and in the Apple Watch Smart Stack. It keeps advancing while OrbitDeck is closed. (Live Activity requires iOS 18 or later.) RIG CONTROL (CAT) AND DOPPLER • Live Doppler for every transponder, per-satellite calibration, and a no-CAT HOLD/TUNE calculator. • Doppler tuning over a Bluetooth LE serial adapter, Icom network (Wi-Fi), the IC-705/IC-905's built-in Bluetooth, or a Hamlib rigctld server. • Radio families in the catalog: Icom CI-V (IC-9700, IC-9100, IC-910, IC-821, IC-820, IC-970, IC-705, IC-905, IC-7100, IC-7000, IC-706 series and older VHF/UHF rigs, plus IC-R receivers), Yaesu (FT-847, FT-736R, FT-817/818/857/897, FT-100, VR-5000), Kenwood (TS-2000, TS-790, TS-711/811, TS-590/590SG/890/990, TH-D74/D75), and any radio Hamlib supports through rigctld. • One full-duplex radio, split-VFO Doppler on one radio, or two radios (including a satellite rig as one leg). Tune modes, per-satellite CTCSS, data modes for digital work, a Beacon button and a one-tap Stop all. • Built-in rigctld and rotctld servers (off by default, with client approval) let programs on your local network share the radio and rotator. ROTATOR CONTROL • Yaesu GS-232A/B (including azimuth-only), Easycomm I/II/III, SPID Rot2Prog and SAEBRTrack over a Bluetooth LE serial adapter, or rotctld, PstRotator and OZ9AAR URC over the network. • Pre-positioning, flip mode, parking, manual control, position read-back, a self-test, and Sun and Moon targets. DIGITAL MODES Audio comes from a USB audio interface, an Icom network-audio radio, or the built-in microphone. All decoding happens on your device. • CW: the DeepCW neural decoder, or the Classic decoder with tone search, filters and adaptive speed. Tap a callsign to log it. • FT4 on linear transponders, with signal subtraction, a deep decode pass, wait-and-pounce and a TX watchdog. • Packet and APRS: 1200 and 9600 baud modems or a KISS TNC (Bluetooth LE or TCP), messaging and beacons through satellites and the ISS, a station map and per-pass logs. • SSTV: satellite and ISS images in the common Robot, Martin, Scottie and PD modes. • Pass recording and voice memos; recording and decoding continue with the screen locked. LOGGING AND AWARDS • An on-device QSO log with LoTW upload (signed on your device), Cloudlog/Wavelog upload, ADIF import and export, QRZ lookups and PDF reports. • Totals for QSOs, satellites, VUCC grids, WAS and DXCC, worked vs. confirmed. TOOLS AND LEARNING • Grid and location converters, distance and bearing, 60+ calculators, Tiny BASIC, lessons, references and Notes. • In-app Help, a station readiness checklist, and backup and restore. Transmitting requires an amateur radio license and your own equipment. Rig and rotator control work while OrbitDeck is in the foreground. Tracking, planning and logging need no extra hardware. Please support AMSAT, which builds many of the satellites OrbitDeck tracks.

  • 5,0
    von 5
    1 Bewertungen

OrbitDeck 1.1 is the biggest update since launch. It turns the tracker into a station controller. • CW decoder: copy Morse on the downlink. The DeepCW neural decoder (on-device, the new default) handles weak signals and uneven fists; the Classic decoder adds tone search with AFC, 50/100/200 Hz filters, squelch and 5–50 WPM. Tap a decoded callsign to log it. • Packet and APRS: built-in 1200 baud AFSK and 9600 baud G3RUH modems, or a KISS TNC over Bluetooth LE or TCP. APRS messaging and beacons through satellites and the ISS, a map of heard stations, a per-pass frame log with statistics, alerts for messages to you, and an optional receive-only satgate. • Awards and a better log: QSO, satellite, VUCC grid, WAS and DXCC totals, worked vs. LoTW-confirmed; a LoTW station-location picker with subdivisions and IOTA; voice memos that become QSO entries; PDF log reports; DXCC and country on every QSO. • Station control: two-radio stations, including a satellite rig as one leg; split-VFO Doppler on one radio; IC-705/IC-905 built-in Bluetooth; a live tune-mode selector (Full, Downlink only, Uplink only, Hold); a Beacon button; per-satellite CTCSS and data modes; and a one-tap Stop all. • Network servers: built-in rigctld and rotctld servers let programs on your local network share OrbitDeck's radio and rotator links. Off by default; new clients need your approval. • Automatic satellite switching: up to 9 priority satellites, switched as each one rises, with a 12-hour simulated plan and a pass timeline on Home. • Rotator control: manual jog and go-to, position read-back with a stall warning, a self-test, automatic retry, and Sun, Moon and fixed-bearing targets. • Live Activity, Dynamic Island and Apple Watch: the next pass counts down on the Lock Screen and runs through the pass and on to the next while OrbitDeck is closed, with a compact Apple Watch Smart Stack layout (iOS 18 or later). • FT4: signal subtraction, a deep "Decode again" pass, DT filtering, Band Activity shading for new calls and grids, a TX watchdog and a short Tune carrier. • SSTV: Martin M3/M4 and Scottie S3/S4, damaged-header fallback, noisy-line repair and automatic start and stop by elevation. • Planning extras: weather and cloud cover on visible passes, activation reminders, AMSAT status with heard marks, a Nearby & DX hub, a location converter, grid distance and bearing, workable states and DXCC, comet positions, Notes, in-app Help, a station readiness checklist, and backup and restore. Safer transmitting and more reliable operation • One transmitter authority for every mode: only one feature keys the radio at a time, Stop and disconnect always unkey, and every mode has a maximum key time. • Transmit refuses a receive-only transponder; FT4 refuses FM-only transponders and Tune needs Transmit on and a callsign. • Network PTT is a separate opt-in with a 3-minute limit, and clients are refused over VPN and cellular. • The rotator retries failed moves instead of skipping them. • An unreadable log file is set aside, never overwritten, and only QSOs the server accepted are marked uploaded. • Imported TLE/OMM elements persist, malformed elements are skipped, and geostationary satellites such as QO-100 show as continuously visible. • The audio input is watched for stalls and restarted, and the screen stays awake while a decoder or recording runs. • Faster FT4 and waterfalls, layout fixes on smaller iPhones, and VoiceOver improvements.

Das Entwicklungsteam, Paul Stoetzer, hat darauf hingewiesen, dass die Datenschutz­richtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklungsteams .

  • Keine Daten erfasst

    Der Entwickler erfasst keine Daten von dieser App.

    Die Datenschutzpraktiken variieren beispielsweise abhängig von den verwendeten Funktionen und von deinem Alter. Weitere Infos

    Der Entwickler hat noch nicht angegeben, welche Bedienungshilfen diese App unterstützt. Weitere Infos

    Größe
    29,5 MB
    Kategorie
    Dienst­programme
    Kompatibilität
    Erfordert iOS 17.0 oder neuer.
    • iPhone
      Erfordert iOS 17.0 oder neuer.
    • iPad
      Erfordert iPadOS 17.0 oder neuer.
    • Mac
      Erfordert macOS 14.0 (oder neuer) und einen Mac mit Apple M1-Chip (oder neuer).
    • Apple Vision
      Erfordert visionOS 1.0 oder neuer.
    Sprachen
    Englisch
    Altersfreigabe
    4+
    Anbieter
    Paul Stoetzer
    • Paul Stoetzer hat sich nicht als Händler für diese App ausgewiesen. Falls du Verbraucher:in im Europäischen Wirtschaftsraum bist, gelten die Verbraucherrechte nicht für Verträge zwischen dir und dem Anbieter.
    Copyright
    © 2026 Paul Stoetzer