Qvantum
Utilities
Only for iPhone
Free · Designed for iPhone. Not verified for macOS.
The Qvantum app lets you control your heat pump at home. Set temperature – or set your device to “vacation mode” to save energy if you’re going away and won’t be home.
• You control heating and water directly in the overview.
• How many of you are home? Set shower level for the number of residents.
• Going away on holiday? Activate the “Away mode” – the energy saving mode – when you are away.
• Cold weather? Raise the temperature a few degrees if you are frozen.
• Guests visiting? Boost ventilation and temporarily increase the hot water so everyone can have a hot shower.
For installers – installation made easy
Scan the QR code on the packaging and get going. It’s almost as easy as 1-2-3 and the app guides you through the installation.
Easy to use!
• Check-list before installation to make sure everything is in order.
• Easy step-by-step installation and set-up.
• Installer control before handover to resident
more Home user:
- New reduced ventilation option available for QE model (Note: Not available in Swedish market)
- QA Compressor view is now available in system overview
Installer:
- Added support for QX device (requires display 1.12 or newer)
- New I/O Output functions: cooling addition and threshold
- Faroe islands can now be selected as installation country
- QA Compressor view is now available in system overview
We have also fixed bugs, tweaked the UI, corrected a few things and made some general improvements.
1.27.3 29 Oct
Home user:
- Improved Plugwise and Sonoff setup
Installer:
- Create template/s and support for MDU projects
- Added I/O configuration output: Ground water pump.
- Improved Plugwise and Sonoff setup
We have also fixed bugs, tweaked the UI, corrected a few things and made some general improvements.
1.26.8 19 Oct
Home user:
- Improved Plugwise and Sonoff setup
Installer:
- Create template/s and support for MDU projects
- Added I/O configuration output: Ground water pump.
- Improved Plugwise and Sonoff setup
We have also fixed bugs, tweaked the UI, corrected a few things and made some general improvements.
1.26.7 15 Oct
New features
- Added support for setting primary sensor for dew protection
- Added support for selecting multiple sensors as controlling temperature sensors
- Added support for French
Installer
- Added support for the QP-14 passive cooling unit
- Option to save an installation as a template
- Added diagnostics tools for installers
Enhancements
- Improved Energy statistics visuals
- Show cooling status in home user overview
Fixes
- Handle case where Silent mode for QE falsely shown as enabled
- Fixed an issue where vacation mode not synced with app
- Fixed issue where passive cooling could not be enabled for QG-7-P-C
- Various fixes and improvements
1.25.21 5 Oct
New features
- Added support for setting primary sensor for dew protection
- Added support for selecting multiple sensors as controlling temperature sensors
- Added support for French
Installer
- Added support for the QP-14 passive cooling unit
- Option to save an installation as a template
- Added diagnostics tools for installers
Enhancements
- Improved Energy statistics visuals
- Show cooling status in home user overview
Fixes
- Handle case where Silent mode for QE falsely shown as enabled
- Fixed an issue where vacation mode not synced with app
- Fixed issue where passive cooling could not be enabled for QG-7-P-C
- Various fixes and improvements
1.25 30 Sept
Features
- Added scheduled and manual silent mode for QE
- Support for Produal CO2 sensors (Modbus)
- Sensor control: New menu for configuring connected sensors
- Access control: Enable, disable or limit UI features in the heat pump display
Enhancements
- Added ability to change or remove type of installed QA unit
- Various UI fixes and enhancements
Fixes
- Fixed a visual bug in energy statistics screen + corrected units
- Fixed an issue causing offline installations to not be synced when regaining connection
- Fixed issues causing popup-drawers occasionally not responding to touch
- Fixed Away mode not updating in app (when activated from the heat pump)
- Fixed Heating curve shift is shown off-center over the suitcase in away mode
1.24.20 27 Aug
New Features
- Added support for QG-7-P and QG-14-P units
1.23.6 9 Jun
Enhancements
- Added support for Danish and Czech languages
- Made it simpler to fine tune ventilation settings with new stepper controls
- Support for additional QG-7 / QG-14 devices
- Additional language options for QV devices
- Various UI improvements
Fixes
- Fixed issue where compressor speed was missing in system overview
- Fixed issue in scheduler where colliding blocks could be assigned the wrong end time
- Fixed issue where BBR value was cut of
1.23 1 Jun
New Features
- New setting for Plugwise Flame status behaviour
- System overview images for QG6/QG12
- Enabled energy statistics for every market
Enhancements
- Various accessibility improvements
- Better warning when saving colliding scheduler blocks
- Improved Qvantum QV view
Bug fixes
- Fixed issue where sheet did not respect keyboard
- Fixed various UI inconsistencies
1.22 19 May
New Features:
- The app has been updated to use the new branding
- Support for Homewizard P1 power meter
- Ground source settings for QG now available in service mode
- Enabled support for upcoming QH+QA feature
Bug fixes:
- QA fan speed is now displayed correct
- Clarified wording for BT1 weather control
- Smaller bug fixes and improvements to UI
- Fixed an issue where QH-175 was displayed as QA-9
- Fixed an issue with editing a manual heating curve
1.21.15 28 Apr
New Features:
- The app has been updated to use the new branding
- Support for Homewizard P1 power meter
- Ground source settings for QG now available in service mode
Bug fixes:
- QA fan speed is now displayed correct
- Clarified wording for BT1 weather control
- Smaller bug fixes and improvements to UI
- Fixed an issue where QH-175 was displayed as QA-9
- Fixed an issue with editing a manual heating curve
1.21.13 22 Apr
New Features:
- The app has been updated to use the new branding
- Support for Homewizard P1 power meter
- Ground source settings for QG now available in service mode
Bug fixes:
- QA fan speed is now displayed correct
- Clarified wording for BT1 weather control
- Smaller bug fixes and improvements to UI
- Fixed an issue where QH-175 was displayed as QA-9
1.21 20 Apr
Features
- I/O Config mode: Activate Cooling
- New I/O config input: Plugwise Flame state available for machines connected to a Plugwise device
- Support for offline installations
Installation
- QG cooling settings available in installation setup and service mode
- Improved QG Anti-Freeze Liquid settings
Fixes
General
- GP2 speed and BF1 flow was shown in many decimals in System Overview
Home user
- Fix defrost symbol briefly visible before disappearing
- Remove extra ventilation when QS is connected
1.20.26 1 Apr
Features
- I/O Config mode: Activate Cooling
- New I/O config input: Plugwise Flame state available for machines connected to a Plugwise device
- Support for offline installations
Installation
- QG cooling settings available in installation setup and service mode
- Improved QG Anti-Freeze Liquid settings
Fixes
General
- GP2 speed and BF1 flow was shown in many decimals in System Overview
Home user
- Fix defrost symbol briefly visible before disappearing
- Remove extra ventilation when QS is connected
1.20.24 30 Mar
New Features
- Scheduler – Configure a weekly schedule to control heat pump operation.
- I/O Configuration – Enable control of the heat pump via digital inputs and outputs.
- Installation Templates – Added template support for new heat pump installations.
Enhancements
- Enabled energy measurement screen for Spanish installations.
- Improved handling of Away mode across different time zones.
- Updated System Overview and Service Mode interfaces.
- Updated BBR and operation mode settings in Initial Setup.
Fixes
- General UI improvements and minor bug fixes.
1.19.19 2 Mar
New Features
- Scheduler – Configure a weekly schedule to control heat pump operation.
- I/O Configuration – Enable control of the heat pump via digital inputs and outputs.
- Installation Templates – Added template support for new heat pump installations.
Enhancements
- Enabled energy measurement screen for Spanish installations.
- Improved handling of Away mode across different time zones.
- Updated System Overview and Service Mode interfaces.
- Updated BBR and operation mode settings in Initial Setup.
Fixes
- General UI improvements and minor bug fixes.
1.19 24 Feb
Enhancements
- Made smart control available in Germany
- Various improvements to UI and data loading
- Screed dryout can be run in "addition only" mode
- Added a Dutch privacy policy
New features
- Adaptive cooling: making it possible to produce cooling lower than 18° (if supported by heat pump)
- Configure output relays through app
- New setting to use weather service instead of outdoor temperature sensor
Bug fixes
- Fixed issue where fan mode value did not update correctly in service mode UI
- Fixed issue where smart control did not appear as active
1.18 19/12/2025
Features
- Added support for installation of additional Qvantum devices and models
- Smart Control is now available in the Netherlands and Austria
- Silent mode settings for Germany
- Screed dryout mode
- Away Mode scheduled in the future is more apparent
Enhancements
- Main contractor - Simplified warranty registration for installations
- Improved error handling and tooltips
Fixes
- Various fixes to installer mode
- Fixed issue with "Reset alarms" button not working for all alarm types
1.17 01/12/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
- Bug fixes
1.16.54 15/11/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
- Bug fixes
1.16.53 14/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16.52 06/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16.48 01/10/2025
New features
- Filter change reminder
- Ownership change
- Support for QT install
Enhancements
- Dutch language now available
- Add additional devices flow enhancements
Installer
- Additional countries for heat pump installation settings
- Installation checklist items update
- Operation mode in Service mode mirrors Operation mode in user mode
- Added Plugwise and Sonoff setup to installation
Fixes
- System overview, fixed precision and added Compressor speed
- UI fixes
1.16 25/09/2025
General
Enhancements
• QR-code scanning switches to the corresponding user or installer mode
• Haptic feedback for buttons and notifications
• More accurate countdown timers
Installer
New Features
• Cooling curve in Service mode
• Circulation pump speed control in Service mode
Enhancements
• Maximum BBR power displayed in watts
• Added country field to warranty registration
• Revised texts installation-checklist tooltips
1.15 26/06/2025
General
- Improved support for older display versions ~1.0.34 and below
Installer
- Remote service - use service mode / system overview to remotely change the heat pump configuration
- QS can be added to QE heat pumps as an add-on
- WiFi can be set during installation
- Cooling curve added for QE in heat pump setup
- Completing the checklist is not required to close an installation
Various other UI and bug fixes.
1.14.27 30/05/2025
Home user:
- New reduced ventilation option available for QE model (Note: Not available in Swedish market)
- QA Compressor view is now available in system overview
Installer:
- Added support for QX device (requires display 1.12 or newer)
- New I/O Output functions: cooling addition and threshold
- Faroe islands can now be selected as installation country
- QA Compressor view is now available in system overview
We have also fixed bugs, tweaked the UI, corrected a few things and made some general improvements.
more Version 1.27.3 29 Oct
Data Linked to You The following data may be collected and linked to your identity:
Data Not Linked to You The following data may be collected but it is not linked to your identity:
