BitClip
Música
1,99 €
BitClip Bit Crusher / Soft Clipper Plugin (AUv3)
BitClip is an audio effect plugin that can run standalone, or in any AU compatible host application such as Logic or GarageBand.
Overview
BitClip combines bit-crushing and soft-clipping to create lo-fi distortion effects. From subtle, retro degradation, to gnarly diode-emulated distortion, BitClip can deliver, with a very low CPU cost! In "Warm" mode, BitClip's DSP has been tuned to mimic the sound of actual hardware, instead of just performing a simple bit-crush calculation. As a result, some of the higher frequencies normally associated with the effect are attenuated. Both effects work well in tandem, especially when trying to bring the character of old hardware samplers and drum machines to sounds that would otherwise be too "pristine".
Parameters
Active - Set to Off for bypass / no processing. Warm mode adds a bit of vintage character to the processing, attenuating some high frequencies, although this is not a simple LPF. Bright mode essentially bypasses the Warm mode processing with no added tonal colouration.
Out - Sets the output level. This can be used to attenuate the overall volume of the effect. For example, you can smash the Gain going into the clipper, then back-off the Out level so the track doesn't dominate your mix. At the maximum setting, no attenuation is applied.
Crush - Toggles bit-crushing On or Off.
Depth - Sets the desired bit-depth of the crushing from 16 Bit down to 4 Bit in 1 Bit intervals. In vintage hardware, devices would often be 8 or 12 Bit, whereas BitClip allows you to explore unusual values in-between. For example, 5 Bit provides much more clarity than 4 Bit, but can still sound satisfyingly crunchy!
Clip - Toggles soft-clipping On or Off.
Gain - Sets the gain applied to the signal going into the soft-clipper. Depending on the level of the incoming signal, lower settings may not sound obvious, but clipping will still occur, creating a subtle distortion effect and preventing any signal through that's over 0dB. With up to 48dB of gain on tap, BitClip can drive pretty much anything into nasty diode-like distortion!
For more info and support please visit:
www.waverley-instruments.com/robjackson
Valoraciones y reseñas
- Esta app no ha recibido suficientes valoraciones o reseñas como para mostrar una visión general.
Added Warm / Bright modes - you can now bypass the default "vintage / warm" processing by selecting Bright mode.
El desarrollador, Rob Jackson, ha indicado que las prácticas de privacidad de la app pueden incluir la gestión de datos descrita a continuación. Para obtener más información, consulta la política de privacidad del desarrollador .
No se recopilan datos
El desarrollador no recopila ningún dato en esta app.
Accesibilidad
El desarrollador no ha indicado todavía las prestaciones de accesibilidad que son compatibles con la app. Más información
Ficha técnica
- Tamaño
- 12,2 MB
- Categoría
- Música
- Compatibilidad
Requiere iOS 12.0 o posterior.
- iPhone
Requiere iOS 12.0 o posterior. - iPad
Requiere iPadOS 12.0 o posterior. - iPod touch
Requiere iOS 12.0 o posterior. - Mac
Requiere macOS 10.13 o posterior.
- iPhone
- Edad
4+
- 4+
- Proveedor
Rob Jackson
- Rob Jackson se ha identificado como comerciante de esta app y ha confirmado que este producto o servicio cumple la legislación de la Unión Europea.
- Dirección
60 Addison Street
North Shields
Tyne And Wear
NE29 6LR
Reino Unido - Número de teléfono
+44 7889499844 - Correo electrónico
rob@music4sport.com
- Derechos de autor
- © 2025 Rob Jackson
