Major update for printing efficiency and control. - New: Assisted Shot - Manual highest plane determination improves measurement accuracy compared to automatic detection. - Optimized: Continue on Low Ink — Support Reprint, Test Print, and Camera Calibration when ink level is below 10%.

This update brings major improvements to printing efficiency and control — introducing key features like Continue Printing After Low Ink Warning, Repeat Printing, and Print Countdown, along with smarter workflow enhancements throughout the app. - New: Continue Printing After Low Ink Warning — Users can now choose to continue printing after the device shows a 10% low ink warning, until ink reaches the minimum usable level. - New: Repeat Printing — After completing a print job, users can skip the photo-taking step and quickly start the next print. (The feature is off by default and can be enabled in device settings.) - New: Print Countdown — A visible countdown timer now appears on the print progress page. - New: Automatic Log Upload — With user permission, the program can automatically send error logs to help developers analyze and improve the experience. - New: Print Head Replacement Mode — When selecting to replace the print head in the consumables list, the device will enter a special state to assist with the procedure. - Optimized: Print Test and Camera Calibration — Redesigned guidance visuals and improved workflow help users complete these steps faster and more intuitively. - Optimized: Cancel Print and Photo Flow — Users who cancel a print job will no longer be required to retake photos upon returning to the editor. - Optimized: Roll Installation Guidance — Updated visuals and clearer instructions enhance the setup experience. - Fixed: Various minor issues.

- The community now features courses and events. Share & discover new ways to play with creators worldwide. - Optimized editor performance for smooth handling of large images. - Added batch project deletion. - Enhanced the guided process for print testing, calibration, and rotary printing. - Optimized the user feedback process on iOS and improved app stability.

We're thrilled to announce our app now fully supports the new eufyMake E1- the world's first personal 3D-Texture UV Printer! - Introduced an informative article about E1 during the device initialization phase. - Updated the printing test functionality - Text-to-Image model upgrade for better generation quality. - Fixed bugs

We’re thrilled to anounce our app now fully supports the new eufyMake E1 — the world's first personal 3D-Texture UV Printer! We’ve also redesigned the AI design tools and creative community to unlock richer UV printing experiences.

Fixed bugs.

AnkerMake renames it as eufyMake. All current services will remain uninterrupted.

Added User Experience Program After updating to this version, you can view the User Experience Program in Settings > About > Terms and Conditions.

1. Added a print failure diagnostic link on the print completion page. 2. Fixed bugs.

1. Added a new entry for AnkerMake official store. 2. Fixed bugs.

1. Added a reminder for when the filament used in the last G-code is different from the current one. 2. Optimized the text of some error pop-up windows that were difficult to understand.

1. Added a new entry for contests. 2. Added an upload feature for community prints. 3. Fixed bugs.

- Added a notification about the preheating of the printer when sending G-code to the printer or downloading G-code from Make it Real.

1. Explore has a fresh new look, seamlessly connecting with Make It Real's model community, bringing brand-new features such as categorized searching, sorting, commenting, and favoriting. 2. In the "Me" section, you can now earn points by completing tasks and exchange those points for rewards. 3. In-app slicing has been comprehensively optimized, significantly boosting file loading and slicing speeds.

1. Added a part lifespan maintenance feature for M5C. 2. Added a nozzle clog cleaning feature for M5C. 3. Upgraded the message center.

Added part lifespan maintenance for M5, so now you can check the lifespan of key parts and perform timely maintenance or replacement. Note: Firmware must be updated to V3.0.78 or above.

1. Added support in the model library for the M5 all-metal hotend. 2. Added G-code for the M5 all-metal hotend for some popular models. 3. Added access methods for the Terms and Conditions.

Fixed the issue of being unable to find M5 when adding a device

1. Preheat has been renamed Quick Temp Control, and added a cooling button. 2. Added some guidance information for the AI function. 3. Fixed crashing issue when the system language is Arabic. 4. Fixed incorrect printing status error.

Fixed some bugs that were causing crashes.

Completed minor improvements and bug fixes.

1. Added an in-app model search engine and cloud slicer. 2. Added a Maintenance feature for M5C

1. Changed the speed settings from X times to percentage. 2. M5C: The default temperature of extruding/retracting changed to 250℃ to avoid extrusion jams.

1. M5C has added volume adjustment in settings->custom (the firmware version needs to be upgraded to V3.0.36) 2. Added a reminder to check if the printer type setting is correct when selecting a Gcode/Acode file to print.

- Minor Fixes: Minor improvements and bug fixes