Nous avons résolu un problème qui entraînait l'échec des achats intégrés dans certaines conditions.

Toutes les complications Apple Watch fonctionnent désormais correctement !

Tailles de police de cadran ajustées sur les écrans iOS et Apple Watch de 38 mm et 40 mm pour une utilisation plus facile. A rendu les complications Apple Watch plus stables.

A rendu les complications Apple Watch plus stables.

Version 3.7.3 Correction de deux icônes de complication Apple Watch cassées. Mise à jour de certaines traductions allemandes en fonction des commentaires des clients. ----- Version 3.7.2 Le module complémentaire Apple Watch rappelle désormais la dernière calculatrice utilisée au lancement. Ajout d'un espace entre les étiquettes du calculateur de profondeur de champ de l'Apple Watch. Correction d'un problème en raison duquel le calculateur de filtre ND pour Apple Watch réinitialisait la vitesse d'obturation et la force du filtre sélectionné après le redémarrage de l'application. Amélioration de la stabilité lors de la liaison des minuteries de filtre ND de l'Apple Watch et de l'iPhone. Meilleure gestion du passage de la minuterie passive à la minuterie active sur l'Apple Watch ND Filter Calculator ----- Version 3.7.1 Correction de quelques problèmes mineurs de formatage de la page de paramètres ----- Version 3.7 Possibilité supplémentaire d’acheter et de restaurer les achats intégrés directement à partir de l’Apple Watch. Ajout d’unités de mesure basculant passer à l’écran de paramètres de calculatrice profondeur de champ. Maintenant, inclure la limite de mise au point proche dans la lecture Hyperfocal DoF, même si elle est plus que l’infini. Documents d’aide supprimés pour les calculateurs DoF, ND Filter et Exposure Shift Vous pouvez maintenant glisser à gauche et à droite sur les trois écrans de calculatrice pour naviguer directement entre eux. Une longue pression sur le bouton visibilité du filtre de la calculatrice de filtre ND affichera désormais un dialogue qui offre de démasquer tous les filtres cachés. Pris les coins de tous les éléments de l’interface utilisateur et mis à jour le look and feel pour rendre Photographer’s Friend encore plus joli. Décimales restaurées pour les limites de mise au point proche et lointaine dans la calculatrice DoF. Correction d’un problème qui pourrait empêcher la valeur du cercle personnalisé de confusion d’être enregistré dans les paramètres de calculatrice de profondeur de champ de l’Apple Watch.

Version 3.7.2 Le module complémentaire Apple Watch rappelle désormais la dernière calculatrice utilisée au lancement. Ajout d'un espace entre les étiquettes du calculateur de profondeur de champ de l'Apple Watch. Correction d'un problème en raison duquel le calculateur de filtre ND pour Apple Watch réinitialisait la vitesse d'obturation et la force du filtre sélectionné après le redémarrage de l'application. Amélioration de la stabilité lors de la liaison des minuteries de filtre ND de l'Apple Watch et de l'iPhone. Meilleure gestion du passage de la minuterie passive à la minuterie active sur l'Apple Watch ND Filter Calculator ----- Version 3.7.1 Correction de quelques problèmes mineurs de formatage de la page de paramètres ----- Version 3.7 Possibilité supplémentaire d’acheter et de restaurer les achats intégrés directement à partir de l’Apple Watch. Ajout d’unités de mesure basculant passer à l’écran de paramètres de calculatrice profondeur de champ. Maintenant, inclure la limite de mise au point proche dans la lecture Hyperfocal DoF, même si elle est plus que l’infini. Documents d’aide supprimés pour les calculateurs DoF, ND Filter et Exposure Shift Vous pouvez maintenant glisser à gauche et à droite sur les trois écrans de calculatrice pour naviguer directement entre eux. Une longue pression sur le bouton visibilité du filtre de la calculatrice de filtre ND affichera désormais un dialogue qui offre de démasquer tous les filtres cachés. Pris les coins de tous les éléments de l’interface utilisateur et mis à jour le look and feel pour rendre Photographer’s Friend encore plus joli. Décimales restaurées pour les limites de mise au point proche et lointaine dans la calculatrice DoF. Correction d’un problème qui pourrait empêcher la valeur du cercle personnalisé de confusion d’être enregistré dans les paramètres de calculatrice de profondeur de champ de l’Apple Watch.

Correction de quelques problèmes mineurs de formatage de la page de paramètres dans la version 3.7.1.Correction de quelques problèmes mineurs de formatage de la page de paramètres dans la version 3.7.1.Correction de quelques problèmes mineurs de formatage de la page de paramètres dans la version 3.7.1.dAjout d’ajusteurs diffraction limit guide - vous pouvez maintenant affiner les points de départ des avertissements de diffraction ambre et rouge (inclus dans Pro Add-on) Ajout d’un curseur de valeur à l’infini à l’écran des paramètres de calculatrice profondeur de champ (inclus dans Pro Add-on). Ajout du japonais comme langue entièrement soutenue et 14 autres langues avec traduction automatique (arabe, chinois (simplifié), chinois (traditionnel), Français, allemand, hébreu, hindi, italien, coréen, malais, portugais, russe, espagnol, turc). Ajout d’une aide contextuelle à bord avec mise en surbrillance des éléments pour vous aider à traverser les paramètres et l’utilisation — accessible via un bouton d’aide sur les calculatrices et l’écran des paramètres DoF Calc. Suppression du menu principal de Photographer’s Friend sur l’Apple Watch et modification de la navigation. Consultez l’aide à l’extension de l’Apple Watch mise à jour dans l’ami du photographe pour plus de détails. Possibilité supplémentaire d’acheter et de restaurer les achats intégrés directement à partir de l’Apple Watch. Ajout d’unités de mesure basculant passer à l’écran de paramètres de calculatrice profondeur de champ. Maintenant, inclure la limite de mise au point proche dans la lecture Hyperfocal DoF, même si elle est plus que l’infini. Documents d’aide supprimés pour les calculateurs DoF, ND Filter et Exposure Shift Vous pouvez maintenant glisser à gauche et à droite sur les trois écrans de calculatrice pour naviguer directement entre eux. Une longue pression sur le bouton visibilité du filtre de la calculatrice de filtre ND affichera désormais un dialogue qui offre de démasquer tous les filtres cachés. Pris les coins de tous les éléments de l’interface utilisateur et mis à jour le look and feel pour rendre Photographer’s Friend encore plus joli. Décimales restaurées pour les limites de mise au point proche et lointaine dans la calculatrice DoF. Correction d’un problème qui pourrait empêcher la valeur du cercle personnalisé de confusion d’être enregistré dans les paramètres de calculatrice de profondeur de champ de l’Apple Watch. Correction de quelques problèmes mineurs de formatage de la page de paramètres dans la version 3.7.1.

Ajout d’ajusteurs diffraction limit guide - vous pouvez maintenant affiner les points de départ des avertissements de diffraction ambre et rouge (inclus dans Pro Add-on) Ajout d’un curseur de valeur à l’infini à l’écran des paramètres de calculatrice profondeur de champ (inclus dans Pro Add-on). Ajout du japonais comme langue entièrement soutenue et 14 autres langues avec traduction automatique (arabe, chinois (simplifié), chinois (traditionnel), Français, allemand, hébreu, hindi, italien, coréen, malais, portugais, russe, espagnol, turc). Ajout d’une aide contextuelle à bord avec mise en surbrillance des éléments pour vous aider à traverser les paramètres et l’utilisation — accessible via un bouton d’aide sur les calculatrices et l’écran des paramètres DoF Calc. Suppression du menu principal de Photographer’s Friend sur l’Apple Watch et modification de la navigation. Consultez l’aide à l’extension de l’Apple Watch mise à jour dans l’ami du photographe pour plus de détails. Possibilité supplémentaire d’acheter et de restaurer les achats intégrés directement à partir de l’Apple Watch. Ajout d’unités de mesure basculant passer à l’écran de paramètres de calculatrice profondeur de champ. Maintenant, inclure la limite de mise au point proche dans la lecture Hyperfocal DoF, même si elle est plus que l’infini. Documents d’aide supprimés pour les calculateurs DoF, ND Filter et Exposure Shift Vous pouvez maintenant glisser à gauche et à droite sur les trois écrans de calculatrice pour naviguer directement entre eux. Une longue pression sur le bouton visibilité du filtre de la calculatrice de filtre ND affichera désormais un dialogue qui offre de démasquer tous les filtres cachés. Pris les coins de tous les éléments de l’interface utilisateur et mis à jour le look and feel pour rendre Photographer’s Friend encore plus joli. Décimales restaurées pour les limites de mise au point proche et lointaine dans la calculatrice DoF. Correction d’un problème qui pourrait empêcher la valeur du cercle personnalisé de confusion d’être enregistré dans les paramètres de calculatrice de profondeur de champ de l’Apple Watch.

*** Introducing the Active Timer! *** - In the Neutral Density Filter Calculator for Apple Watch, with Active Timer, now timers up to one hour, can provide audible and haptic taps as an aid to the timer status, even when the watch face turns off. Active Timer will also automatically engage from 60 minutes, even for longer exposures. - An Audible Tap (a ding and a haptic tap) plays every ten seconds from 60 to 5 minutes. It plays every 5 seconds from 3 to 1 minute, then every 3 seconds from 60 to 10 seconds. From 10 to 4 seconds it plays every other second, then every second for the last three seconds before the alarm starts to remind you to stop your exposure. - Mute your Apple Watch if you don’t want the sound, but the Audible Tap option makes the taps heavier, and harder to miss. With Audible Taps turned off and just the Active Timer, you’ll get lighter taps during the countdown with no sound. - Photographer’s Friend can now be completely closed during an ND Filter Calculator timer on both the Apple Watch and iOS device, and it will review the timer when opened again. If the app remains closed, you’ll still get a notification to remind you to stop your exposure. - We also added synching of ND Filter Calculator shutter speed and selected ND Filters from the iPhone to Apple Watch when tapping the watch button. - There is now a Decimal Fractions field in the ND Filter Calculator for Apple Watch to cater for filters such as an ND400 which is rated at 8.6 stops. The fractions for stacked filter combinations on the iPhone are also synchronized with the Watch Extension. - Turn on auto-hide to remove the Decimal Fractions field when there is no fraction in the synched filters. When hidden, swipe up to show the Decimal Fractions field to manual input filter fractions. In addition to the above changes, the Settings, Help & Links Tables now flash the scroll bar when selected to make it more obvious that there is more to see when scrolled. - In version 3.6.1 we fixed an issue that caused the hyperfocal distance values at the top of the DoF Calculator to be trailing by one selection when the hyperfocal distance lock was engaged. *** Other Recent Changes *** Version 3.5 was a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Silicon Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable.

*** Introducing the Active Timer! *** - In the Neutral Density Filter Calculator for Apple Watch, with Active Timer, now timers up to one hour, can provide audible and haptic taps as an aid to the timer status, even when the watch face turns off. Active Timer will also automatically engage from 60 minutes, even for longer exposures. - An Audible Tap (a ding and a haptic tap) plays every ten seconds from 60 to 5 minutes. It plays every 5 seconds from 3 to 1 minute, then every 3 seconds from 60 to 10 seconds. From 10 to 4 seconds it plays every other second, then every second for the last three seconds before the alarm starts to remind you to stop your exposure. - Mute your Apple Watch if you don’t want the sound, but the Audible Tap option makes the taps heavier, and harder to miss. With Audible Taps turned off and just the Active Timer, you’ll get lighter taps during the countdown with no sound. - Photographer’s Friend can now be completely closed during an ND Filter Calculator timer on both the Apple Watch and iOS device, and it will review the timer when opened again. If the app remains closed, you’ll still get a notification to remind you to stop your exposure. - We also added synching of ND Filter Calculator settings from the iPhone to Apple Watch when tapping the watch button. When multiple filters are selected on the iPhone the nearest whole number of ND stops are calculated. In addition to the above changes, the Settings, Help & Links Tables now flash the scroll bar when selected to make it more obvious that there is more to see when scrolled. - In version 3.6.1 we fixed an issue that caused the hyperfocal distance values at the top of the DoF Calculator to be trailing by one selection when the hyperfocal distance lock was engaged. *** Other Recent Changes *** Version 3.5 was a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Silicon Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable.

*** Introducing the Active Timer! *** - In the Neutral Density Filter Calculator for Apple Watch, with Active Timer, now timers up to one hour, can provide audible and haptic taps as an aid to the timer status, even when the watch face turns off. Active Timer will also automatically engage from 60 minutes, even for longer exposures. - An Audible Tap (a ding and a haptic tap) plays every ten seconds from 60 to 5 minutes. It plays every 5 seconds from 3 to 1 minute, then every 3 seconds from 60 to 10 seconds. From 10 to 4 seconds it plays every other second, then every second for the last three seconds before the alarm starts to remind you to stop your exposure. - Mute your Apple Watch if you don’t want the sound, but the Audible Tap option makes the taps heavier, and harder to miss. With Audible Taps turned off and just the Active Timer, you’ll get lighter taps during the countdown with no sound. - Photographer’s Friend can now be completely closed during an ND Filter Calculator timer on both the Apple Watch and iOS device, and it will review the timer when opened again. If the app remains closed, you’ll still get a notification to remind you to stop your exposure. - We also added synching of ND Filter Calculator settings from the iPhone to Apple Watch when tapping the watch button. When multiple filters are selected on the iPhone the nearest whole number of ND stops are calculated. In addition to the above changes, the Settings, Help & Links Tables now flash the scroll bar when selected to make it more obvious that there is more to see when scrolled. *** Other Recent Changes *** Version 3.5 was a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Silicon Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable.

Version 3.5 is a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Silicon Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. v3.5.6 - Improved Apple Watch syncing performance and reliability v3.5.7 - Fixed an error that could cause Apple Watch Extension to crash when returning to the Main Menu.

Version 3.5 is a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. v3.5.6 - Improved Apple Watch syncing performance and reliability

Version 3.5 is a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize up to eight color schemes, including gradation point, and save them for switching later. The main traffic light colors and highlight colors used throughout Photographer's Friend are also now editable. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. v3.5.5 - Improved Apple Watch syncing performance and reliability

Version 3.5 is a huge update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize the gradations on up to eight backgrounds and save them for switching later. The main traffic light colors and highlight color used throughout Photographer's Friend are also now editable. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. v3.5.3 - Fixed a condition that could cause high CPU use on Apple Watch in certain circumstances.

This is a Huge Update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase and support for Mac OS X available for everyone. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. As part of the Pro Add-on, you can now customize the gradations on up to eight backgrounds and save them for switching later. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations.

This is a Huge Update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase and support for Mac OS X available for everyone. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. * Minor update 3.5.2 to fix Mac OS X availability issue.

This is a Huge Update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase and support for Mac OS X available for everyone. Completely reworked the User Interface, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right to left) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features. ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. You can flip the ND Calculator top and bottom sections for ease of use, and flip left with right on all Smart Rotation screens, making Photographer's Friend even friendlier for left-handed users. Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Depth of Field Calculator Tweak ## Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We also corrected a minor error in the sub-micrometer depth of field calculations. * Minor update 3.5.1 makes In-App Purchases more permanent once bought.

This is a Huge Update adding Apple Watch Extensions for the DoF Calculator and ND Filter Calculator which are enabled via an In-App Purchase and support for Mac OS X available for everyone. Completely reworked the UI, making it generally prettier with better resizing of fonts for larger screens (iPad and Mac). There are also now two different backgrounds available for both Light and Dark appearances, all based on sunrises and dawn light. ## Added Apple Watch Extension for ND Filter Calculator ## You can now transfer your calculated exposure time from your iPhone to your Apple Watch and run the timer on the watch, along with countdown sounds and haptics so you’ll know when to stop our exposure without looking at your iPhone or Watch. Unlink the Watch Extension from the iPhone by tapping the chain link and you can select a shutter speed and total stops of ND filter to apply and calculate filtered exposure time with just the Apple Watch. From the settings screen (swipe right) you can set a custom timer just for the Watch or send it to the iPhone if they are linked, and run the timer from either device. When linked, you can start and stop the timers on either device independently. *Note that Apple Watch Extensions are paid Add-on Features.* ## Added Apple Watch DoF Calculator ## We have added a completely standalone, fully functional version of the Depth of Field Calculator for Apple Watch. Has almost complete feature parity with the iOS version, including Pixel Peeper Mode and the same intense level of detail! Double-tap the DoF Readout to transfer the Hyperfocal Distance to the Focus Distance Dial. The central data band is a teal color when the settings result in hyperlocal distance or greater. Long-press or triple tap to lock the Hyper Focal Distance link to the Distance Dial, indicated by gold background for central data band. When the Extension is available, a watch button will appear on the DoF Calculator on your iPhone, which when pressed, transfers all of your DoF Calculator settings to the Watch and updates the DoF details accordingly. *Note that Apple Watch Extensions are paid Add-on Features.* ## Mac OS X Support ## Photographer’s Friend is now available on Mac OS X 13.5 or later! This is a free upgrade for all existing owners of Photographer’s Friend and an excellent way to reference the calculators and help screens on a larger screen! ## Large Characters on iPad and Mac OS X ## Your Photographer’s Friend just got friendlier on your eyes! Not only is it prettier, but we now detect larger screens and increase the size of fonts accordingly throughout the application. ## Smart Rotation ## If you buy the Super-Power Pro Update via In-App Purchases, you will also be able to turn on Smart Rotation which splits the screens into two and reformats the screens intelligently when using your device in landscape orientation. There is also an option to switch the panels from left to right, which makes Photographer’s friend easier to use in your left hand while operating your camera with your right. This is also useful for left-handed users, as it puts the controls for each calculator closer to the holding hand. ## DoF Calculator Tweaks ## Hyperfocal Distance Lock is here! You can now tap or long-press a padlock in the Hyperlocal Distance readout box and Photographer’s Friend will automatically adjust the Focus Distance dial to the focus distance required to achieve hyper-focus as you move the sensor size, aperture, and focal length dials. Without the lock engaged, the DoF Calculator will temporarily adjust the focus distance as it has in the past. Hyperfocal DoF distance text now changes to a teal color when the dials are set to a focus distance equal to or greater than the Hyperfocal Distance. We corrected a minor error in the sub-micrometer depth of field calculations.

* The HFD (Hyperfocal Distance) can now be locked/unlocked with a one-second press, or by tapping the padlock, forcing the Focus Distance dial to automatically adjust to the currently calculated HFD. The lock can remain on when the HFD is not transferred to the Focus Distance dial but has no effect until the HFD label is tapped, indicated by a teal-colored label, along with a locked padlock icon. * It’s now possible to lock/unlock the Format (sensor size) dial with a one-second press, or by tapping the padlock. This setting is not changed often and some users found that they changed it inadvertently and didn’t notice. * If you try to change the Format (sensor size) or Focus Distance dials when their respective locks are engaged, a message will be displayed asking if you’d like to deactivate the lock and proceed with the change. It’s also possible to keep the lock on if the change was not intentional and the value will be reset to the original value. * Added a new DoF Calculator Help Screen to explain the new HFD and Format Dial Locks. * Refined the messaging system that was introduced in version 3.2, including a number of fun welcome messages. * Fixed a known issue that caused the Status Bar to effectively become invisible until the tab bar is tapped after shaking the device to toggle between Light and Dark Appearances on iOS 13 or later devices. * Fixed an issue that caused a blank space to be created on the right side of the Tab Bar on iPads that caused the app to crash when tapped.

We added support for Light and Dark Appearance throughout Photographer's Friend (requires iOS 13 or higher, though earlier versions work fine in Light mode). Now you can shake your device to switch between Light and Dark Modes. There is also a Default Appearance mode, which changes automatically to match the Appearance set on your iOS device. Try the new Dark mode. It looks great! We also added two new medium format sensor sizes CF0.79 (44 x 33 mm) and CF0.64 (53.4 x 40 mm) to the Depth of Field Calculator.

- Added automatic support for regions such as France and Russia that use a comma instead of a period to delimit decimal fractions. - Photographer's Friend now automatically uses a comma as the decimal delimiter in the custom Circle of Confusion setting for the Depth of Field Calculator. - Fixed a problem that caused the Exposure Shift Calculator to crash the app if a region that uses a comma in decimal fractions was set in iOS. - Fixed an issue that resulted in a truncated title in the Exposure Shift Calculator help.

This is a minor update to fix the following issues... - The focus distance dial is now updated to the new Hyperfocal Distance if the Hyperfocal Distance was actively being transferred to the focus distance dial when Pixel Peeper mode is activated or the megapixels changed. - The focus distance dial is also now correctly updated if a new aperture is sent to the Depth of Field Calculator from the Exposure Shift Calculator while the Hyperfocal Distance is being transferred to the focus distance dial. - Fixed an issue that caused the Exposure Shift Calculator screen to be displayed if the Depth of Field Calculator settings were changed straight after the aperture being transferred from the Exposure Shift Calculator. - Fixed an embarrassing typo in the Startup Help for the Exposure Shift Calculator.

In this release we've tweaked the decimal points in the Depth of Field Calculator a little more, to display even more detail for very shallow depth of field measurements. Also, under the hood, the code has been tweaked and updated to Swift 4.2.