INTRODUCING: SCENES!!! Join our Facebook or Discord community for any support/features/suggestions. Also check our new app website https://avrmaestro.com for a full manual New: - Scenes: capture your receiver exactly how you like it - input, volume, sound mode, Audyssey/Dirac, speaker preset, channel and sub levels, tone, Zone 2/3, the tuner station, and more - and recall it with one tap. Save as many as you want; recall from the new Scenes tab or a Home dashboard card. Your existing Channel Presets carry over automatically. On slower receivers a full scene applies in a few seconds, sent in order so it never overloads the receiver. - Dedicated Speakers tab: Layout / Distances / Levels / Crossovers / Subwoofer, plus Speaker Preset - Full tab customization in Settings (hide tabs you don't use) - Speaker Levels screen (the setup levels - not the same as Channel Levels) - Dashboard renamed to Home - New probe files in the debug menu Fixed: - Speaker signal detection in certain cases - Switching Speaker Preset now refreshes every speaker screen to the active preset - all receivers - Older mid-range receivers: Distances/Levels/Crossovers load reliably instead of timing out or needing a retry Firmware note: - Pre-March-2025 firmware (X4500H/X6700H/S960H/X4700H, web on port 10443): can't serve Speaker Layout or Subwoofer Output to the app, so those show a "manage in web control" card with a button + a reminder you can hide the tab. - Post-March-2025 firmware: all speaker screens shown and editable in-app.

New: Speaker Layout page under the Sound tab New: Eco Mode, Cinema EQ, Center Spread, and Center Level Adjust now save as part of your channel presets. New: Zone 2 / Zone 3 Balance controls (per-channel L/R trims). New: Subwoofer Level Adjust shows every subwoofer your receiver has (up to 4). New: Quick Select / Smart Select shows every slot your receiver exposes. New: Transport controls auto-hide unless the source is Network or HEOS, and are fully functional + visible when active. New: Amp Assign confirms before reconfiguring, with an "Applying" indicator. Fix: 3rd Subwoofer now available when applicable per chassis Fix: mid/lower chassis models refresh on pages where model is not fast enough or firmware is old

New: - Single play/pause button on the media player - Enhance Detection Preset switching with for Dirac/Audyssey detection per preset Fixed: - Dirac slot Off no longer hides Dirac or falsely enables Audyssey - Now Playing card clears when playback stops, including from other apps - Center Level: correct value at startup and instant updates from other control apps - IMAX and Auro new models support - HEOS fixes for non flagship models

Thank you everyone for the incredible support and feedback. Please join our facebook and discord communities so we can continue evolve and enrich support for the app. New: Subwoofer output (LFE / LFE + Main) New: Volume controls in Radio tab Fix enhancement: Random AVR Disconnect in certain models. If this is still happening please reach out to support Future: NexusDeck tie in work Maintenance work Hide the Radio tab when the AVR is off

1. TV Audio, CBL/SAT, Bluetooth tiles bug fix 2. Slider Guard - blocking accidental press on sliders 3. Channel preset save bugs 4. New: INITIAL RELEASE: Speaker Distacne with dedicated page 5. New: INITIAL RELEASE: Speaker Crossover with dedicated page 6. NEW: Radio tab and full support for supprted models 7. Enhance debug log for future support of chassis 8. Settings: hide speaker preset/crossover tabs 9. Future: Enablement for NexusDeck (Future app) 10: INITIAL RELEASE (Monitor): Dirac & Audyssey SPP Support

Join our facebook/Discord community: 1. INITIAL RELEASE: Speaker Preset / Dirac / Audyssey - dev against cinema 30 - Note this feature is complex please join our communities for feedback and discussion 2. UI/UX Work 3. Block accidental vol touch 4. IMAX audio work and bugs 5. auromatic3d support 6. Debug menu easy share/save/download 7. Multi AVR Reordering based on preference 8. Muli Zone PID Work 9. Easy "rate" link in settings (please rate app and share, only way to support continue development) 11. Add surround level compensation 12. New widgets to dashboard 13. UI/UX enhancements 14. X6800H/AV20/RS7013/X4300H more model support and enhancements 15. Bug fixes and enhancements 16. LFE Controls 17. More

Join our facebook and discord groups for any issues or questions (Links in app) - Quick Select Creation: 17 more options - Tactile Transducer (supported chassis). - Subwoofer Level Adjust card + Dashboard widget. - Wake-on-LAN for chassis in cold standby. - Rename Quick / Smart Select slots. - Audyssey + Dirac Live visibly disable each other. - Massive save presets new options - DIRAC bugs and maintenance - Save & share button on Debug Log. - Fixed: Z2 / Z3 no longer power off on launch; many wire-form fixes.

- Added: Subwoofer Level Adjust card on the Sound > Surround tab. - Added: Subwoofer Level Adjust widget on the Dashboard. - Fixed: Dirac Live slot showing the wrong filter when changed outside the app. - Fixed: Channel Presets now portable across receivers with different wire forms. - Fixed: "Update Preset" no longer silently drops the subwoofer offset.

- Main-power on Dashboard is now zone-independent. Zone 2/3 stay alive when Main goes off. - Fixed the Z2/Z3 off-then-back-on bounce after Main powers on. - Rename Quick/Smart Select slots (long-press). Per-receiver, in backup, on Dashboard + Remote tab. - Exit app actually closes the app on Android. - Volume tick labels match the receiver's display scale. - Smaller VOLUME word in dashboard card. - Theme-aware error toasts. - Stability: Audyssey crash + image-load noise fixed.

Surround mode picker: rebuilt for accuracy: - Always shows the active mode highlighted. - Tapping any sound mode now switches the receiver. - No flicker when source format changes. - Faster mode switching avoid interrupts streaming apps.

1. New TJ Mode lets you pick any custom color for the app theme. 2. Each Zone Control card now shows its own HEOS Now Playing stream and transport controls. 3. Six new dashboard cards: Speakers Layout, Video Processing, Dynamic Range Compression, Dirac Live Filter, Audyssey State, and Channel Levels Snapshot. 4. Hide pages you don't use from the Sound and Remote tabs in Settings -> Customize Tabs. 5. Save up to 20 channel level presets (was 10), all included in Backup & Restore. 6. Zone 2 and Zone 3 stay powered on independently of the Main zone. 7. Hardware volume keys on Android now control the receiver from any tab. 8. Audyssey LFC and Containment Amount read your receiver's real value at startup. 9. AVR-A10H now correctly exposes Auro 3D, IMAX Enhanced, and Dirac Live controls. 10. Surround mode chip highlighting works correctly across Denon and Marantz firmware variants. 11. Many smaller fixes including volume slider responsiveness, AURO Surround engagement, Channel Levels Snapshot dB math, and surround mode chip list reliability on source switches.

- Simplification of the currently Playing Music card: Rename of card Removal of HEOS (due to instability of multi AVR environment) Add pulling state 2s for when playing music for quicker refresh - New: Add custom speaker saved preset to dashboard - New: Custom speaker presets now saved in backup file

Join our discord to discuss the below: discord.gg/UmVtxE5fXN NEW FEATURES • [EARLY PREVIEW]: HEOS multi-room grouping. Dedicated Groups screen with Group All, multi-select, per-player Leave. Auto-discovers every Denon/Marantz AVR + HEOS speaker on your network. • HEOS Favorites. Long-press any track or station to pin it to your HEOS account favorites. • "Launch HEOS app" buttons in Dashboard and Music Browser. One tap into the official HEOS app for any service we don't fully support. • Backup & Restore. Full export/import of every receiver, source order, theme, scale, volume, explanation card state, and HEOS caches. Save to device or share. • Smart broken-service detection. At device-add we probe each music service and remember which are firmware-broken on this receiver, persisting across phone reboot. MEDIA BROWSER REBUILD • Pinned scrollable breadcrumb at every folder level • Inline search bar everywhere • Artwork grid + list/grid toggle • Long-press queue actions: Play Now, Play Next, Add to Queue, Add to Favorites • Service-identity logo in the AppBar • Disk-cached service icons survive app kill / phone reboot SETTINGS • Picture Mode moved out of Settings into the Remote tab • "Test & Save" Add Receiver flow auto-saves on green test • AVR identity gate refuses to save non-Denon/Marantz devices • Collapsible explanation cards everywhere with master on/off • "Show explanation cards" toggle in Settings → Help FIXES • Center channel level value drift • IMAX Enhanced toggle now reflects real receiver state • Amazon Music nested-folder loop killed • Volume readout drift between top/bottom indicators • Backup-restore could lock the receiver firmware (now safe across devices) • Channel Levels list shrinks correctly when switching modes • Speaker Channel Preset hold yellow overflow stripes • HEOS connect/disconnect tap errors • HEOS launcher correctly opens HEOS app on iOS (heosbydenon:// scheme) • Pandora "NDA" cropped logo • Service icons render immediately on first launch • Long device names no longer overflow Dashboard AppBar • Local Music false-positive loop guard on AVR-A10H • Giant icons fix on Samsung high-DPI phones • Plus 14 other polish fixes

Join us on Discrord to discuss new features!! In this release: - Cleaner zone cards: compact power toggle in the header (no more giant round button), volume readout now matches your AVR's relative-dB or absolute scale just like the main dashboard. - Per-zone volume presets: each zone (Z2, Z3) now has its own customizable preset row, persisted across app restarts. - Volume preset row redesign on the main dashboard too: 8 positions, drag any saved preset to the spot you want, no more left-cluster on tablet. - Multi-AVR switcher in the title bar: tap your active AVR's name to flip between configured receivers instantly. - Speaker layout decoder fixed: 5.1.2 / 7.1.4 / dual-subwoofer setups now display correctly. Previously some Atmos receivers showed wrong bed/height counts. - S-series chassis (S540H, S660H, S760H, S860H, S960H): IMAX and AuroMatic UI no longer appears for receivers that don't actually support those features. - Fixed two crash classes (tone control screen + zone reconnect race). - Save into all 8 volume preset positions on dashboard + every zone - New Audio Restore dashboard card (Off / Low / Med / High) - Settings toggle to flip which volume scale (dB vs VOLUME) is the big primary readout - Hidden sources from your AVR's setup menu now properly hidden in the app - Quick / Smart Select buttons read your user-configured names on more chassis (X3700H, X4500H, AV7705) - Sources card now collapses into a bottom sheet, matching the Sound Mode card - Hidden sources stay hidden on Cinema 30 / A10H across the periodic poll cycle - Center Level Adjust syncs from the receiver, Denon Remote App, front panel, or voice on legacy chassis (X4500H-era) - Settings tab back arrow returns you to the dashboard - Bug fixes and stability improvements.

What's new in v2.13.0: NEW: Drag-and-drop source-tile reordering on the dashboard. Long-press any source, drag to reorder, tap Done. Order saves per-receiver. NEW: Manual A/V audio-delay slider for Denon and Marantz. System Controls → AUDIO DELAY. 0–500 ms range with ±1 ms nudge buttons. FIXED: Sources hidden in the AVR's setup menu now actually disappear from the app. Volume presets honor the receiver's relative-dB scale when you have your front panel in that mode. Surround → Sound Mode rename on the dashboard. POLISHED: Tile sizes scale to screen width: iPad users get tighter, more compact grids instead of stretched-out tiles. Pruned redundant success toasts (button highlights already showed the state).

Note: Join Discord for feedback as some fixes could not be verified as they require different models etc. I attempted to implement all feedback received and require confirmation and logs if still not solved. Discord is ideal for feedback: • Denon Quick Select buttons fixed • Smart Select vs Quick Select labels per brand • Custom QS/SS slot names from your receiver • Volume display matches AVR's front panel (relative dB mode supported) • Long-press a QS/SS button to save current state • Hidden inputs from receiver setup menu now respected • All Zone Stereo toggle + sub count accuracy on flagship chassis • Per-device presets (separate for each AVR you connect)

What's fixed in 2.9.8: IP Address field can now be typed on non-English iOS locales (fix for French / German / Spanish users on iOS) Defensive input handling - commas auto-convert to periods for paste safety