PunchKit 1.6 turns the cassette and Punch It into a deeper live-performance instrument. This latest build also makes everyday sessions more dependable: newly connected EP MIDI devices are detected more reliably, stale sample-folder permissions can be repaired, backup imports and previews hand audio over cleanly, tabs respond faster, and the REC sort menu stays stable. • Open ∞ below FS to capture a seamless half-, one-, two-, four-, or eight-bar loop from live input (multi-in/out USB audio device required (such as the EP-136)) • Quantize capture to the next beat or bar, release immediately, on a beat, or at loop end, and choose pre- or post-FX capture • Follow a selected CoreMIDI source, automatically choose a sole active MIDI clock, detect beats from audio, or set a tapped/manual tempo • Keep a captured loop running at the last stable tempo if MIDI clock stops, then relock smoothly when clock returns • Perform captured loops at ½×, 1×, or 2× tape varispeed, view the captured waveform and playhead, and continue scratching downstream on the cassette • Send the final effected and tape-manipulated loop to a safe separate USB return and capture that same performance when REC is active • Explore a dedicated Space page with Reverb, Dub, Granulator, Tape Echo, Chorus, Phaser, Spring, Shimmer, Resonator, Infinite, Gated Verb, and Wide • Perform every Space effect in Direct mode or route one or more effects through the XY pad • Push Reverb from compact reflections into long, modulated tails; bloom Shimmer into a dramatic octave cloud; and hold Infinite for sustained frozen ambience • Build a 12-slot Custom page from any combination of Color, Motion, and Space effects, with a denser six-effect-wide editor tray • Get smoother parameter movement and safer long feedback tails, including improved level consistency and protection against crackles, dropouts, and runaway values • Browse one shared local sample shelf across Library, Projects, and Kit Builder, then drag sounds directly to device samples or pads • Switch automatically into the connected EP workspace while keeping saved backups available to preview, share, or delete offline • Monitor class-compliant USB audio through a lower-latency path, including interfaces and EP devices that expose only one stereo return • Name takes faster with dice suggestions, date-stamped defaults, clearer save controls, and more reliable editing layouts • Record, play, trim, process, and separate takes through supported audio-only routes without connecting an EP • Use roomier landscape layouts, clearer sample play controls, wider backup controls, and more reliable search and menu interactions All Punch It processing, recordings, samples, projects, and backups remain local to PunchKit. Effects never modify connected EP data unless you explicitly choose an upload or assignment action. PunchKit is independent and is not affiliated with or endorsed by Teenage Engineering.

PunchKit 1.5 expands the recorder into a more personal and responsive performance space. • Create named, muted Pixel Background videos locally from clips in Photos, with trim, fill or fit, zoom, position, pixel size, contrast, saturation, and brightness controls • Use the new Pro Background Studio to preview multiple saved clips, arrange and reorder a looping video chain, edit looks, and manage the local library • Search saved takes by name; sort by date, name, size, or length; and filter takes by stem availability • Toggle the live effect chain and choose a preset directly from the cassette, with full editing still available in Punch It • Get steadier live tempo tracking, use the EP’s USB MIDI clock when available, and guide saved-take analysis with a tapped BPM • Tune tape scrubbing with adjustable sensitivity, deadzone, smoothing, scratch-head gain, follow duration, and maximum rate • See a concise What’s New screen once per release, then reopen it from Settings whenever you want • Open the new Support PunchKit panel to leave a review, etc • Improved Pixel Background editing and reordering, renamed-version baking, stem compatibility, live tape-mix alignment, monitoring, and opt-in issue diagnostics Pixel Background processing and storage remain local to PunchKit. Backgrounds are visual-only and never modify recordings, projects, samples, or connected EP devices. PunchKit is independent and is not affiliated with or endorsed by Teenage Engineering.

PunchKit 1.4 expands recording, processing, live performance, and connected EP sample management. • Enable RECORD WITH FX to capture through the complete effect chain • Use RAW mode to adjust color profiles and effect parameters while performing with Punch It • Perform with a virtual tape transport on saved takes or live input: drag backward or forward, choose HOLD, FOLLOW, or beat-aligned SYNC, and resync deliberately • Monitor and process compatible USB audio live without starting a recording • Stack Color and tempo-synced Motion effects in Direct, XY, Custom, or RAW layouts • Use the redesigned cassette controls for monitoring, recording, playback, looping, Punch It, and full-screen tape performance • Double-tap effect sliders to restore the active preset value • Keep playback speed when switching presets and shape it with a centered logarithmic control • Use compact, aligned effect controls across take editing, sample editing, and RAW mode • Rearrange live EP pad assignments by dragging between pads, with confirmation before clearing an assignment or deleting its device sample • Preview library samples by holding a row, select and review multiple samples before deletion, and search or refresh from the library toolbar • Check available EP sample memory before uploads and show preparation, deletion, and refresh progress sooner • Choose the MIDI channel used for pad-preview note messages • Record from the built-in microphone or compatible USB audio, manage original and rendered take versions together, and follow live or saved-take tempo • Use adaptive iPhone landscape and iPad layouts with clearer workspace switching, consistent margins, and a unified portrait pad surface PunchKit Pro remains a one-time purchase with no subscription and supports Apple Family Sharing. Existing founding users receive Lifetime Pro automatically. PunchKit is independent and is not affiliated with or endorsed by Teenage Engineering.

PunchKit 1.3 is our biggest update yet, adding an offline Kit Builder, local stem separation, and a redesigned Punch It performance system. • Build 12-pad kits without an EP connected; import, preview, arrange, save, share, and upload them later • Separate takes into vocals, drums, bass, and other after a one-time model download; processing then runs locally • Mix stems with level, mute, solo, and waveform controls; save, share, bounce, or send stems to EP pads • Perform stackable Color and tempo-synced Motion effects with Direct or XY controls • Build a custom 12-slot Punch It page and use sampler-inspired effect profiles • Follow live or saved-take tempo automatically, with editable BPM and tap correction • Record from the built-in microphone or compatible USB inputs, with live USB monitoring • Search, sort, and hold-to-preview the EP sample library • Keep Original and rendered versions together in versioned take packages • Upload samples through a clearer unified destination workflow • Enjoy landscape iPhone and adaptive iPad layouts, plus light, dark, and device-inspired themes • More reliable EP uploads, live hardware refresh, diagnostics, and issue reporting • People who downloaded PunchKit before 1.3 receive Lifetime Pro automatically • New users can try core workflows free, then unlock unlimited use with one optional purchase - no subscription; Family Sharing supported

PunchKit 1.2 makes connecting and recording more dependable. - Smoother auto-detection and connection for EP-133, EP-1320, and EP-40 - Clearer guidance for unsupported devices and microphone permission issues - More reliable USB audio recording and WAV take creation - Better layouts on smaller iPhones - General interface polish and fixes

This update improves PunchKit’s recorder and Punch It workflows. New in this version: • Better take handling with clearer metadata, improved source take selection, and delete feedback • Subtle haptic feedback for recording, selection, buttons, and destructive actions • Improved Punch It controls and take layout on smaller screens • Clearer WAV/M4A labels across themes • Safer sample import behavior while multi-pad import is being refined • General UI polish, reliability fixes, and smoother EP project/backup workflows