IMPROVEMENTS: - We've made some changes to how "Better Performance" mode works for the Media Extension in Final Cut Pro which improves quality and performance in some cases. Thanks for your help and support Final Cut Pro team!

BUG FIX: - When using the "Immersive Export" feature, if you do an "Immersive Fade" at the of a clip, on a Apple Vision Pro, it would hold on the last frame of the Blackmagic RAW footage. We now apply a "Default Camera" for any non-Blackmagic RAW clips to fix this issue. Thanks Tim!

IMPROVEMENTS: - The Media Extension now supports "Better Performance" mode in Final Cut Pro. Thanks for your help and support Final Cut Pro team! - Up until the M5-series, Apple Silicon only supports a maximum of 16,384 pixel Metal textures, whereas the M5-series supports up to 32,768 pixels. Due to this and limitations with Media Extensions in Final Cut Pro, when working with Blackmagic RAW footage greater than 16K on machines older than the M5-series, BRAW Toolbox now forces a lower decode quality so that the footage can import and play. On an M5-series Mac, full decode quality is supported. This is only relevant for cameras such as the Blackmagic URSA Cine 17K 65. BUG FIXES: - Fixed a bug where Gyroflow stabilisation would only work on macOS 26. - Fixed a bug where Gyroflow stabilisation would only work at full decode quality. - Fixed colour space handling in Apple Compressor. Thanks for your help and support Final Cut Pro team! - Fixed a bug where an Apple Immersive Video Universal (.aivu) file from the "Immersive Export" could fail to load on Apple Vision Pro due to unsupported audio formats.

BUG FIX: - Fixed a very annoying bug that caused the Media Extension to stop rendering after 4096 frames - causing Final Cut Pro to display black frames. Thanks for reporting pratap and adamloretz-stack!

IMPROVEMENTS: - This release has MAJOR under-the-hood improvements for the Media Extension in terms of playback performance. The playback performance now more closely matches the legacy BRAW Toolbox Workflow Extension. It's not quite as good as DaVinci Resolve - but it's super close now. Thanks for reporting Dustin Painter & Robin! Thanks for your help Final Cut Pro team! Thanks for your ideas and suggestions AdrianEddy & Brian Elliott Tate! - Gyroflow support in the Media Extension has also had MAJOR under-the-hood improvements. The results in the Media Extension should now exactly match the official Gyroflow application and Gyroflow Toolbox. Thanks for reporting mhbsavant! Thanks heaps AdrianEddy! - The Media Extension now has the ability to read Gyroflow projects as sidecar files. If your BRAW file has a .gyroflow file with the same filename next to it, the Media Extension will use the Gyroflow settings from that file. - There's a new "Immersive Export" feature in BRAW Toolbox. If you create a 16320x7200 @ 90fps timeline in Final Cut Pro and cut together Blackmagic RAW Immersive clips using the Media Extension, you can now export a ProRes and FCPXML, and use BRAW Toolbox to generate an Apple Immersive Video Universal (.aivu) file that can be loaded on the Apple Vision Pro. - We now bundle two transitions in Final Cut Pro, "Immersive Fade" and "Immersive Cross Fade", that don't do anything visually in your Final Cut Pro timeline, but tell the "Immersive Export" tool to apply transitions to these clips via metadata. BUG FIXES: - The BRAW Toolbox v3.0.0 Media Extension was creating cache files that were not always correctly cleaned up - wasting hard drive space. This is now fixed. Thanks for reporting Iain Anderson & Christian Miranda! - If the BRAW Toolobox v3.0.0 Media Extension was unexpectedly taking up hard drive space, please manually delete the "/Users/YOUR-USER-NAME/Library/Containers/com.latenitefilms.BRAWToolbox.FormatReader" and "/Users/YOUR-USER-NAME/Library/Containers/com.latenitefilms.BRAWToolbox.RAWProcessor" folders on your system to clean up the space. - Fixed a bug where Blackmagic RAW clips were not displaying correctly in Apple Compressor. Thanks for your help Final Cut Pro team! - The "Launch Final Cut Pro" button in the BRAW Toolbox application now works with Final Cut Pro Creator Studio (subscription) and the Final Cut Pro v11 free trial. Thanks for reporting Sebastian Leitner! - Fixed a bug in the Final Cut Pro Workflow Extension, where the "Relink BRAW Clips within an LIBRARY / EVENT / PROJECT" Toolbox didn't support Final Cut Pro Creator Studio (subscription) or Final Cut Pro v11 free trial. Thanks for reporting Aldo! - Reduced the application bundle file size by compressing a TIFF. Thanks for reporting Dmitry Lavrov!

IMPROVEMENTS: - This is another MASSIVE update! We've made big changes under-the-hood. We highly recommend that you make a ZIP of your current version of BRAW Toolbox before updating for safety, so that you can rollback if needed. - BRAW Toolbox now ships with a Media Extension allowing you to read Blackmagic RAW files directly within QuickTime Player, Final Cut Pro and other applications that support macOS Media Extensions. HUGE thank you to the amazing Anton Marini for all his help, guidance, genius and support! - The Media Extension gives you full RAW controls, and metadata within Final Cut Pro. - Gyroflow stabilisation is now built-in to the Media Extension, and can be access via the RAW controls within Final Cut Pro. HUGE thank you to the amazing AdrianEddy for all his help, guidance, genius and support! - The hero BRAW Toolbox application now has a Blackmagic RAW player with full RAW controls and metadata viewing for testing the Media Extension. - The Media Extension supports the Blackmagic URSA Cine Immersive format, by outputting a 16320x7200 side-by-side clip.

IMPROVEMENTS: - Blackmagic URSA Cine Immersive clips now import as 16320x7200 side-by-side clips into Final Cut Pro. We apply the BRAW Toolbox effect to a 16320x7200 TIFF (as opposed to a Motion Generator) to workaround some bugs/limitations in Final Cut Pro's Spatial/Stereo 3D workflow. HUGE thank you to Iain Anderson for all his testing and support! BUG FIX: - Fixed a major regression/bug in BRAW Toolbox v2.0.0 where scaling a BRAW Toolbox clip broke the image quality due to caching. HUGE thank you to Nuno Meneses, Matt, camilledelbos and everyone else in the FCP Cafe Community for all your bug reports, support and patience!

IMPROVEMENTS: - This is a MASSIVE update. We've made HUGE changes under the hood to improve performance on Apple Silicon Mac's. BRAW Toolbox should now be faster and more stable than ever before. HUGE thank you to the amazing Anton Marini for all his help, guidance, genius and support! However, due to the sheer number of under-the-hood changes, we highly recommend making a ZIP of your current version of BRAW Toolbox before updating for safety, so that you can rollback if needed. - Added a "Open User Guide" button to the BRAW Toolbox application. - Updated from FxPlug v4.3.3 to v4.3.4. Thanks Darrin Cardani and everyone at Apple! BUG FIX: - Fixed a regression in BRAW Toolbox v1.5.0 which could cause non-Immersive BRAW clips to crash BRAW Toolbox. My sincerest apologies for missing this bug during testing! HUGE thank you to Aaron Hokanson, Chris Johnson, Joseph Teegardin, Sallen307, SamVChicago, Samir Varma and Vinnys-Cinevita for reporting and helping me troubleshoot!

NEW FEATURE: - We've added a "Video Track" parameter in the "Quality" section for Blackmagic URSA Cine Immersive clips - so you can pick between the left or right lens. You can then put two of the same Blackmagic URSA Cine Immersive clip next to each other in a Final Cut Pro timeline, to do side-by-side immersive editing. Thanks for suggesting Iain Anderson!

IMPROVEMENTS: - Updated the BRAW Toolbox application icon for macOS 26 Tahoe. Thanks Matthew Skiles!

IMPROVEMENTS: - Added support for Blackmagic PYXIS 12K. - Added support for Leica SL3-S, Sony FX3 and Sony FX30 Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.6 to v4.6.1.

IMPROVEMENTS: - Added support for Panasonic LUMIX S1RII Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.6 to v4.6.1.

IMPROVEMENTS: - We've improved how we render error messages in BRAW Toolbox. HUGE thank you to Darrin Cardani at Apple and Gabriele de Simone at FxFactory for all your ongoing help, assistance, genius and support (and for putting up with my crazy questions)! - Added support for Panasonic LUMIX S1II and S1IIE Blackmagic RAW clips. - Improved performance for URSA Cine 12K LF and URSA Cine 17K 65 clips. - Updated from Blackmagic RAW SDK v4.5 to v4.6. - Updated from FxPlug v4.3.2 to v4.3.3.

IMPROVEMENTS: - Added support for Blackmagic URSA Cine 17K 65. - Added support for updated Constant Quality record settings on URSA Cine. - Added support for Panasonic UB-50 Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.4 to v4.5. - Updated from FxPlug v4.3.1 to v4.3.2.

IMPROVEMENTS: - Added support for Panasonic UB10 Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.3.1 to v4.4. BUG FIX: - Fixed a regression where the Toolbox drop zone failed to work properly in older versions of Final Cut Pro.

BUG FIXES: - Fixed a bug where the Toolbox drop zone failed to work properly in Final Cut Pro 11 due to depreciated FCPXML versions. Thanks for reporting Alex Sofonea! - Fixed a bug where the "Check All/Uncheck All" button in the Workflow Extension didn't work correctly. Thanks for reporting Mathew Welsh!

IMPROVEMENTS: - Updated from Blackmagic RAW SDK v4.3 to v4.3.1. - Updated from FxPlug v4.3 to v4.3.1. - Improved Blackmagic RAW SDK stability with simultaneous decodes.

IMPROVEMENTS: - Added support for Fujifilm X-M5 Blackmagic RAW clips. - Added support for Panasonic S5D Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.2 to v4.3. BUG FIXES: - Fixed a bug when using macOS Sequoia where the hero BRAW Toolbox application would fail to set the correct folders when trying to grant sandbox permissions when first setting up BRAW Toolbox. For example, it would default to the user's "Documents" folders, rather than the user's "Movies" folder and the user's "ProApps" folder. Thanks for reporting Karl Winegardner, Robbie Myers, Jens Pluimes & Edwin van W! - Re-designed how we render error messages in Final Cut Pro using Core Image and Metal. Hopefully this will fix random crashes some users are seeing on older versions of Final Cut Pro running on older Intel machines.

IMPROVEMENTS: - Added support for Blackmagic PYXIS 6K. - Added support for Fujifilm X-T50 Blackmagic RAW clips. - Improves support for Blackmagic URSA Cine 12K LF. - Updated from Blackmagic RAW SDK v4.1 to v4.2.

IMPROVEMENTS: - Added support for Fujifilm GFX100S II Blackmagic RAW clips. - Added support for Panasonic GH7 Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v4.0 to v4.1.

IMPROVEMENTS: - Updated from FxPlug v4.2.9 to FxPlug v4.3.

IMPROVEMENTS: - Added support for Blackmagic URSA Cine 12K LF. - Updated from Blackmagic RAW SDK v3.6.1 to v4.0. BUG FIX: - When clicking "Prepare BRAW Files", you'll now get an error message if the Audio Folder is currently in the Trash. Thanks for reporting Mark Terry!

BUG FIX: - Fixed white balance control for Panasonic GH5S and BGH1 Blackmagic RAW clips. IMPROVEMENTS: - Updated from Blackmagic RAW SDK v3.6 to v3.6.1.

BUG FIX: - Fixed a potential crash that we've been trying to solve for ages. On SOME systems (specifically systems with Mac2 family GPUs), Apple's Metal Framework would generate a Metal Texture that the Metal Performance Shader in the Mac couldn't actually work with, causing a crash deep within Apple's code. It was very hard to reproduce, as it only happened on certain systems - and none of ours. HUGE thank you to Apple Developer Technical Support, the Final Cut Pro Team, AdrianEddy and Warren Moore for all their constant and on-going help, assistance, guidance, patience and support!

IMPROVEMENTS: - Added support for Blackmagic Micro Studio Camera 4K G2. - Added support for Panasonic Lumix G9II Blackmagic RAW clips. - Updated from Blackmagic RAW SDK v3.4 to v3.6. - Updated from FxPlug v4.2.8 to v4.2.9. BUG FIX: - Fixed a potential crash when pressing the "Remove Selected" button in the Workflow Extension.